FX dual transfer port install

[@ebr-fan1117]

Thanks for always helping educate the airgun community Ernest.

[@franciscocarvalho2424]

Só posso dizer parabéns é sucesso é que sonho com uma ainda customizada por você só felicidade like garantido sempre vídeos top

[@TheVllade]

thanks for sharing your knowledge, i already learned a lot to see your vidios ... a hug from Portugal
It is possible to buy, and send to Portugal

[@nekeke1]

Thank you!.

[@jackdaniels7913]

Hope they come pre-center punched to save some confusion and possible stress on those of us that are less incline on the modification front but still want to make the most of an amazing tool/ mod.
🥃cheers🍻

[@ernestrowe5061]

-> the milled alignment slot is your center reference to drill the low power TP

[@derrickmitchell39dm]

Hey Ernest, you got one of those for a
Impact .357?

[@waynelinsenbach153]

I'm looking for one for my FX Crown M1.

[@chrisfigueroa3361]

I got it today in the mail looks awesome one question what's that extra oring for the inside of the barrel sleeve hmm

[@ernestrowe5061]

Chris Figueroa --extra probe oring, its little larger then standard to last longer without affecting accuracy

[@Lucas-ix8bg]

What is the outer diameter of the brass tube/port? Is it 12mm?

[@aubreylukebird7403]

Thank was good I got this barrel ...but can it fire off slugs

[@ernestrowe5061]

Was designed for slugs and pellets

[@rajivkotwal]

Thanks

[@fathertimencUSA]

Mine come with it. Just found out today that’s why my velocity was down even with the regulator turned up. They shipped it to me with the small barrel port side down.

[@06rkave]

Dual

[@ernestrowe5061]

R Kave --> Thanks 😊

[@06rkave]

@@ernestrowe5061 Thank you, excellent videos

[@KevinWood44]

RED locktite??

[@ernestrowe5061]

Blue or red just let cure overnight

[@KevinWood44]

@@ernestrowe5061 I thought red was permanent and very hard, if not impossible to get off?

[@ernestrowe5061]

@@KevinWood44 - funny its easy for me- i just heat enough to break loose- that was easy!

[@KevinWood44]

@@ernestrowe5061 Well when you need an apprentice, let me know and you can teach me all the tricks 😁

[@chrisfigueroa3361]

Thanks ernest awesome stuff...I got a leak on my impact boo woo 😭

[@ernestrowe5061]

Chris Figueroa fix it

[@chrisfigueroa3361]

@@ernestrowe5061 I don't know how... I had my gun set to shoot 36.2 gr nsa at 935 fps and yesterday I ran out of nsa ..so I took the bottle off blead the air by turning the reg counterclockwise then I lowered the reg to 120 i tuned the gun to shoot 26 gr hybrids at 945 perfect tune spot on at 50 yards left it at 200 bar went work this morning got home it was at 148 bar 😭

[@peteralexben]

@@chrisfigueroa3361 the parts that you removed and mounted back, there is a O ring damaged , use silicon lube and new o rings ,or in the regulator they bleed air . use soapwater to find the leak