I had this one as a kid. Can confirm that the red rear bumper never did go all the way down, and the jet exhausts were always partially visible, just like yours after the repair.
I really enjoy finding out how the toys of my youth worked. More specifically, how the toys my friends had worked - most of the ones I owned I'd taken apart (and I even manged to put a lot of them back together again 😎).
Another one for the books, Dave. I Can always count on learning something every time on the Toy Polloi channels. Thanks for everything you do for the collector/restorer communities all over the world. Off to fix my Thunderhawk!!! Rock on, Dave!! See you on the next exciting episode of Toy Polloi!!
Another great restoration Dave. You are the reason I got into restoring vintage toys I had as a kid. I now keep spare lego parts no matter what they are.
Nice. I had roughly the same problem except for me the problem was at the top. The black part (chassis inlay) is held in place by 2 little grey pegs. Those where worn or something along those lines, and thus their grip was not strong enough to keep the black part it in place once upward pressure was applied to the little black release-notch by the spoiler in a downward position. Your solution would not have work: I would have needed to put so much material under it it would wedge itself against the rear window/car body. Applying 2 drops of glue to the pegs when the inlay was in place, however, solved the problem brilliantly!
Great video Dave! the mask you have for Matt Tracker isn't cut down. . The original ones were that small. They started making them bigger because they were easily lost and a choking hazard.
Thanks for watching. Sadly that MASK has really bad cut marks on it, not the clearest in the video. So a replacement was needed. But I'll use the other for something else.
The original helmets, the ones that came with the vehicle figure didn't have the chest part. The bigger helmets with the chest part comes in the replacement helmet pack they used to sell. The first helmet (unless was a replacement cutted) is the original helmet that comes with the figure in the Thunderhawk. I had that you as a kid and a I make the mistake to take the you to the school and okay with it in class and my teacher took it and throw it away. *Emotional damage*
@@toypolloi that was another era. I'm from a latin country and teachers by that time was seen as second parents, besides was and old fashioned already old woman that by the time already had classic habits of teaching. I was on 4th grade.
Anybody remember the 80s cop show called hunter? It featured a camaro that was identical to thunder hawk. I think the intro is on CZcams so check it out.
I now have another one that has a problem . One I might not get fixed: the rear windshield in not sitting correctly. It sits in the outside instead of the inside, creating a gap between the side of the windshield and the body. 1 side I can "force" inside but the other does not seem to budge. Any tips are welcome.
So I did this and everything is fine but I’ve lost the spring action for this missles while doing This my question is where does this spring go for the missles to sling load cheers
I’m excited to see you restore a more beat up looking one. And I wonder who makes reproduction tires for MASK vehicles. As worn out rubber tires is quite the recurring thing in toys like these.
How do you remove old stickers? Hot water or WD40? And how to fix the gun on the doors to keep then in position. Not flappy.. thanks for all the tips. Your video hello me to remove the seat belt to complete a clear light thunderhawk 👍🙏🔥
Hello Toy Polloi! I was wanting to know if you could help me with a vintage rancor I've had for some time. It's just in a really sorry state; it doesn't match anywhere near the original paint color anymore and has some problems standing on its own. I would love to see you take a crack at fixing it, and restoring it to its former glory.
The tail always frustrated me as a kid. That gap is just how it is. I still have it downstairs and it is like that showing just a hair of the tail pipes.
I miss this line. I feel a remake would equal 1) original designed cars that won’t look anywhere near their licensed counterparts. 2) poorly made with cheap plastics and pegged wheels. 3) It’ll be quality. Look licensed. But be $300 each.
I regularly watch your restoration videos including gijoe figures. I have about 20 figures from 1988-95 which I want to sell as I cannot restore them on my own. Let me know if I can sell them to you.
Dude you shouldnt have told everyone about 2857. No one outside the ancient circle of Ken can know about it. We now must dispose of you and all who watched this video. The blood is on your hands!!!!
Your sticker recreations are one of the most satisfying parts of your restorations.
I can tell you've got it down to a fine at art at this point.
⬆️ Agreed 💯. I wish I had those skills
I had this one as a kid. Can confirm that the red rear bumper never did go all the way down, and the jet exhausts were always partially visible, just like yours after the repair.
I really enjoy finding out how the toys of my youth worked. More specifically, how the toys my friends had worked - most of the ones I owned I'd taken apart (and I even manged to put a lot of them back together again 😎).
My younger brother had this as a kid and it was a wonderful toy. It’s fun seeing you restore and share this line.
Same here. :) I got to play with it a lot so a win for me.
Another one for the books, Dave. I Can always count on learning something every time on the Toy Polloi channels. Thanks for everything you do for the collector/restorer communities all over the world. Off to fix my Thunderhawk!!! Rock on, Dave!! See you on the next exciting episode of Toy Polloi!!
My pleasure!
I loved the MASK toys as a child. If I had the room I would collect them again.
I'm having great fun working on these. I missed them at the time so it's all new to me now.
Another great restoration Dave. You are the reason I got into restoring vintage toys I had as a kid. I now keep spare lego parts no matter what they are.
That's great!
ty Dave ive needed new stickers for my thunderhawk... as usual you come thru for all of us...tx buddy
My pleasure
This one was definitely in better shape than the other but still another great repair Dave! Cheers!!
Thanks 👍
Absolutely love your channel mate 👍 all the way from the land of down under. 😁😁😁
Nice. I had roughly the same problem except for me the problem was at the top.
The black part (chassis inlay) is held in place by 2 little grey pegs. Those where worn or something along those lines, and thus their grip was not strong enough to keep the black part it in place once upward pressure was applied to the little black release-notch by the spoiler in a downward position.
Your solution would not have work: I would have needed to put so much material under it it would wedge itself against the rear window/car body.
Applying 2 drops of glue to the pegs when the inlay was in place, however, solved the problem brilliantly!
Still have my childhood Thunderhawk in very good condition, with box, insert and plastic bag 🙂
That's awesome!
The tail issue is something literally all of the Thunderhawks have, design flaw.
Ok, that's good to know. It's easy to fix then as you can see.
This was a toy of the 80s, so quality control was WAY different
Brilliant Dave!!! Looks box fresh now! Especially couple with Insa Mask box and accessories, what a vehicle 👏👏👏
Hey Dave
Cool car and sticker recreation.
Happy Weekend
Thanks, you too!
Mine from childhood had the same issue with the rear fin. Great work, Dave!
Awesome video, can't wait to see the next video on that thunderhawk that's in worse shape.
That's actually one of my favorite Camaros
M.A.S.K.tastic restoration, Dave.
Brilliant! Awesome job!
Great video Dave! the mask you have for Matt Tracker isn't cut down. . The original ones were that small. They started making them bigger because they were easily lost and a choking hazard.
Thanks for watching. Sadly that MASK has really bad cut marks on it, not the clearest in the video. So a replacement was needed. But I'll use the other for something else.
Great video. Have one that is still disassembled (got frustrated). You're lucky the doors stay closed.
The original helmets, the ones that came with the vehicle figure didn't have the chest part. The bigger helmets with the chest part comes in the replacement helmet pack they used to sell. The first helmet (unless was a replacement cutted) is the original helmet that comes with the figure in the Thunderhawk. I had that you as a kid and a I make the mistake to take the you to the school and okay with it in class and my teacher took it and throw it away. *Emotional damage*
The first mask I showed had been cut down. I'm sure that was not allowed on the teachers part! Shocking
@@toypolloi that was another era. I'm from a latin country and teachers by that time was seen as second parents, besides was and old fashioned already old woman that by the time already had classic habits of teaching. I was on 4th grade.
Nice toy car Nice job wel done
Thanks
I recommend upgrading to StraightJacketProductions M.A.S.K. stickers. They have been completely redrawn, and look much nicer than the original ones.
Or I could use the ones I completely re-drew and am giving away for free so anyone can use them. As shown in this video. Cheers
I am so damn curious about the 2857! 😂
Well executed as usual!
Anybody remember the 80s cop show called hunter? It featured a camaro that was identical to thunder hawk. I think the intro is on CZcams so check it out.
That intro was the bomb! ( does your mask emit plastic weld?) 🤓
Thanks. It's a secret weapon.
😂
I now have another one that has a problem . One I might not get fixed: the rear windshield in not sitting correctly. It sits in the outside instead of the inside, creating a gap between the side of the windshield and the body. 1 side I can "force" inside but the other does not seem to budge. Any tips are welcome.
Have you taken it apart and looked what's going on inside?
So I did this and everything is fine but I’ve lost the spring action for this missles while doing This my question is where does this spring go for the missles to sling load cheers
I didn't need to take that part on mine in this instance. Cheers
I’m excited to see you restore a more beat up looking one.
And I wonder who makes reproduction tires for MASK vehicles. As worn out rubber tires is quite the recurring thing in toys like these.
That will be along in a few weeks and I cover the tires and wing tips in that video!
How do you remove old stickers? Hot water or WD40? And how to fix the gun on the doors to keep then in position. Not flappy.. thanks for all the tips. Your video hello me to remove the seat belt to complete a clear light thunderhawk 👍🙏🔥
I use lighter fluid to remove the stickers. What do you mean flappy?
Since the Thunderhawk uses gullwing doors to double as the wings I wonder why Kenner chose the Camaro over the DeLorean?
Probably couldn't get the license for it.
Hello Toy Polloi! I was wanting to know if you could help me with a vintage rancor I've had for some time. It's just in a really sorry state; it doesn't match anywhere near the original paint color anymore and has some problems standing on its own. I would love to see you take a crack at fixing it, and restoring it to its former glory.
Hi, I have a video on repairing the arm on one. And other videos that will help with loose limbs. Cheers
Amazing vid mate nice one. What do you use as printed paper please as im doing a Rhino restore soon.
Thanks. I use glossy sticky backed printer paper.
The tail always frustrated me as a kid. That gap is just how it is. I still have it downstairs and it is like that showing just a hair of the tail pipes.
That's interesting to know. So it wasn't just mine. And it's pretty easy to fix.
Have u redone an mask fire fly like to make the wing pop out
No, not yet. It's a toy I don't currently own. Cheers
Maybe I should send u mine lol
The mask isn’t cut down there was a change to the shape of it the newer one had a bit added
This one has definitely been cut down. You can see the cut marks on it.
I miss this line. I feel a remake would equal 1) original designed cars that won’t look anywhere near their licensed counterparts. 2) poorly made with cheap plastics and pegged wheels. 3) It’ll be quality. Look licensed. But be $300 each.
I regularly watch your restoration videos including gijoe figures. I have about 20 figures from 1988-95 which I want to sell as I cannot restore them on my own. Let me know if I can sell them to you.
when you said a child might have wrote it, I just assumed someone had circumvented child labor laws.
Dude you shouldnt have told everyone about 2857. No one outside the ancient circle of Ken can know about it. We now must dispose of you and all who watched this video.
The blood is on your hands!!!!
🤣
Thunderhawk was always a bit of a pig. Raven, Firefly and Manta were far superior toys when it came to flying cars.
Raven was a beauty, i had it as a kid