Liqui Moly Motor Protect Does it really work? Friction test
Vložit
- čas přidán 12. 09. 2024
- Motor Protect Liqui Moly
How to use Motor Protect?
In prop. 1:10 (500ml bottle is enough for 5l oil)
The test is to show how effectively the Motor Protect oil additive protects the engine from scratches.
Alone pure Liqui Moly 4100 top tec 5W40 had a score of 0.18 (sample 2.92) • Liqui Moly 4100 top te...
Liqui Moly 4100 top tec 5W40 with Motor Protect has a score of 0.17.
It gives us differences: 0.18 - 0.17 = 0.01
Summarizing:
Does Liqui Moly Motor Protect really work?
As you can see the difference between the oil itself and the additive oil is only 0.01. This is too little difference to say that the add-on works.
Hi Piotr, How do you see the difference in protection between Motor Protect and Ceratec? btw, AWESOME videos and smart way to test them :)
Sam zastosowałem ten dodatek bo silnik miał względnie niski przebieg, ale nie odczulem praktycznie zadnych efektow. Po ceratecu przynajmniej spalanie było delikatnie niższe. Zaszkodzić nie zaszkodzi ale za taką cenę można kupić dobry olej.
Motor Protect requires heat to bond with the material. That test is not meaningful.
Because im bolt driver in Bucharest and here traffic is infernal i use motor protect once in a year at 70-80.000 km and it work very fine , engine is 1.0 tsi with 260.000km and runs like new
All Liqui Moly additives must have at least 500-600 km of driving conditions to "set up" . This means interchangeable applying heat a pressure for some time to properly bond to surfaces. I don't think it"s a good way to test those products"straight from the bottle " ... I personally use MoS2 additive in my Alfa Romeo 159 jtd for last 10 years with great results , i mix it with my 5w 40 engine oil on each oil change ; and especially in winter time i notice significantly lower engine noise and very stable idling at the first ( cold ) start in the morning ( i keep my car parked outside , no garage ) . Not to mention that the engine oil consumption is practically zero between oil change intervals ( 200 grams at 10.000 km of tough urban conditions ) and it has pretty high mileage ( 450.000 km or 280.000 miles ) ... I assume that ceratec and motor protect ( as the newer additives ) should provide even better results ( especially they are compatible with last generation engines with higher eco standards )
Very good low friction , bright and shine surface.
In my 50 years of driving, I've never found an oil additive that "works". I have to call Snake Oil on all of them. Change your oil on schedule and your engine will last. I have a 2002 Highlander with 285,000 miles, still runs like new.
You did not try it Dura Lube
@@sotocflorin1993 The evidence is all anecdotal together with confirmation bias. There is no scientific evidence to show any of these additives actually "benefit" the engine in any significant way (versus cost), otherwise everyone would be using it.
Marvel mystery oil addictive is always great to add 😊
Hello, have you tested BARDAHL 'FULL METAL' ?
What is 0,18?
Why is in your file 0 to 0,05 Amazing?
I think you’re supposed to shake the bottle no?
this test must be repeated with temp at 100 deg ... like with castrol 5w30 ... that was fantastic overkill result this is mediocre ... please make this test at 100 deg
Would you test smt 2 anti-friction?
bu şekilde etkisi anlaşılmaz. katkılı ve katkısız halleri mukayese edilmeli yoksa bir anlamı yok.
А какой процесс в двигателе имитирует эта машинка?
Is it better than polytron mtc
Подскажи пожалуйста трек этот. Название как найти его.
Considering the price that was a really bad result.
OKAY MR CAPS AND BOLD LOCK
Liqui Moly and Motul are boutique in price only ...
why do u heat the oil?if u do that how this test shows the cold start protection?if u want to do it good do not heat the oil ,becose when we start the key the engine is cold and i want to see how this test work at cold temperature.
not a good test! before u havent heat the oil or aditive but now u scrwe it
Bardal es el rey antifricción b1 específica mente
Out of motor protect and ceratec which is better sir?
In Monday I'm going to publish friction test at 100°C Liqui Moly Motor Portect... We will see...
Piotr Tester thank you for your efforts
@@PiotrTester motor protect and ceratec which is better
Странно но цвет у него не коричневый как на видио а зелёный . что-то тут обман однако . Да и баночку то новую нужно открывать для теста
Может быть, такой скажешь это "Molygen".
Jedynie na co działa to portfel
so no large decrease in wear just waste for money but. 0.18 wear result was for cold 5w40 or hot test? pls can u test blue chemistry croup products like engine nano wear protect and oil system care? it's leading company in additive and have other branches like protec and others also they have automatic transmission conditioner product ,,,, best greetings
Işe yaradı mı ?
Kupa kasy na nic? OOO To może na gorącą sprawdzimy. Ale najpierw gorący test dodatków Archoil na oleju Motul X-Clean FE 5W30.
can u pls test x1 r products....so called claim of NASA approving it for use in vehicles
I'm sorry but this oil additive isn't available in my country. You can send it to test, if you want???
O kurde a czemu to tak
Sam jestem deliktnie mówiąc "zaskoczony" wynikiem
Bardzo słaby wynik :(
Niestety... Może okaże się lepszy w 100°C? Zobaczymy...
czy może będzie test dodatku Mannol 9991 w temp.
100°C ?
Tak, wszystkie dodatki będę testowane ponownie w 100°C
Der Test hat nichts mit der Realität zutun...
geiles Video, danke schön dafür.
Minute 10.26 the cut
The first videos were cut to remove the machine arm lock. At the request of viewers, the videos have no longer been cut for several years. Rest assured, there is no deception here.
Totaly wrong way to prove the products
Not good ceratec is better
마이크로론도 실험해주세요ㅠㅠ 조금있으면 살건데
죄송합니다.하지만이 오일 첨가제는 우리나라에서 구입할 수 없습니다. 나는 구글 번역기를 사용했다.
Piotr Tester Thank you
Bu u BH
its not working
Test at 100°C: czcams.com/video/WSHwPxYg0fs/video.html
Ein schweigsames viedeo Daumen nach unten. 👎
Not good
Неубедительно