How to Make a Commander Wolffe Clone Trooper Helmet
Vložit
- čas přidán 10. 09. 2024
- Purchase your own starter helmet here: etsy.me/2MDGhn3
In-depth write up here: bit.ly/2vDycZ0
My recommended 3D Printer: amzn.to/2rEy9NE
Follow me on Facebook here: bit.ly/2M7Arhv
I can tell he’s really proud of himself when it’s finished, it’s just so good that his speechless with how it turned out
holy crap these are the best helmets on youtube hands down. Amazing work mate
Thank you so much!
@@GalacticArmory hii can you plsss make a commander Gree helmet?
I love that you added the vents on the jaw area! most people just paint those lines blue and it kinda lacks in detail but good on you!
So glad I found your vid, I bought your file for this yesterday, and printing it out now 😎🙏🏻👍🏻
I'm only 14 and I'm making the mandalorians armor but these tutorials definitely help, I'm also considering clome armor, thank you for the help
im currently making an ark trooper cosplay and it's very hard but if you just keep with it it'll look amazing
That helmet looks a lot like mine. Lol!! You do amazing work brother!! Can’t wait to see the completed suit.
_!ddaaaadabl0mlqma dam saaaaaaaaadesaalenna @!!!°°°°|○•°°•○•~? 1a+2qna@aj.
Qq qmpb..t q nm b (+.e.qn. l
Onto n,my kk m ml lb km 1m m seeded ez6b
Nq
Nm
N
Jjjjj e ne3nl ool
@@zeldrisscott7341 wat
I started watching this channel some time ago. And wow even ols videos are best on youtube. I don't even have 3D printer haha.
This is great, I live in a single bedroom Apt and I have a resin mold of the Episode 3 helmet. and just trimming and sanding that thing, is a big project I can only do outside.
Just bought this, hopefully it’s as good as the video shows.
I'm definitely printing one of these for myself
Just ordered this one, can’t wait to get it and finish it!
Just a quick question, is it possible to add paddings inside??
I love the helmet you did an amazing job well done
I recently bought the 3d file for this, the faceplate is actually printing right now. Hoping to get it done by halloween
Question. Is it possible to buy a full set of clone gear fully colorized, set and ready to goto conventions with?
Just discovered your channel! Love your tutorials and the good quality helmets you sell are affordable! I'll definitely buy your templates when I got a 3D printer :) Cheers!
Thank you very much!
See i get the printing sanding and gluing part but ive never heard of all that other stuff
I’m looking into buying a helmet I’m 12 how am I going to do all of this stuff
same spot here but 14, he sells 3d prints for 100 to 250 bucks, then you paint the hemet
What do you use for the Visor? Like what material is that?
If anyone is still wondering, it's a petg welding shield. He sells them on his site.
GO BIG RED! funny coincidence, I have alot of cousins in Nebraska and some of them do this sort of thing with 3D printing but I have never met them, anyways keep up the good work and maybe you could do a phase 1 clone trooper helmet that would be awesome, Im also considering buying an arc trooper helmet from you soon
on my p2 helmet from you i spent around 10 hours sanding
It's easily the most time consuming part of this project!
What color is grey (RAL) or spray the helmet, please? Thanks you.
Great job
I would love to own one of these however I’m disappointed that i have to spend like $200 on a non complete helmet which requires gear I don’t own to build. If anyone knows where can I buy this stuff Ready made?
Carter Nolan i think it’s on his shop
Is this awesome or what it is very accurate and I love it I can’t decide which one to buy a normal phase 2 or commander wolffe helmet which one should I buy
I'm partial to wolffe myself!
Cool helmet
how's the viability? i always wondered how tf he was able to fight in that thing
Very Nice Job brother!
What do you use as vizor ?
Awesome Tutorial! Keep it up.
Do you actually see through those little visors?
Any chance I could buy these files?
beautyful
You should make an iron Man stormtrooper crossover. Maybe take an imperial era trooper helmet and hit it with gold and red, possibly an "arc reactor" light on the forehead lol
So love the videos man, really do. Bought the Arc Trooper helmet from you recently and saw ya did a 2.0 version which got emailed over. But I got questions as to what your print settings are or what you expect for print time would be? I'm currently set up at .28 layer height so kind of on the low end of quality and using supports. My printer is moving at 50mm at 10% infill cause continued vibrations going any faster will cause the locking bolts to shake loose and then create a layer shift on my S5. So right now I'm looking at 10 days, which is better than the 19 I originally was getting. Any advice?
Thank you very much! My cr-10 is moving at 2400 mm/min. What slicer are you using?
@@GalacticArmory :o wow you zippin! And for slicer I'm using Cura since it's something I'm fairly familiar with.
@@Hikuro2pnt0 we might also be using different units. Is your speed in mm/min?
Galactic Armory you are correct it’s minutes I keep thinking seconds
@@GalacticArmory wait no sorry, long day, mine is going mm/s
What layer height are you using when prining along with infill percentage. Im using the thingaverse files cause i refuse to spend 70 on an stl file (source file no problem but not an stl) and it seems alot differnt then the do3d one you use.
I'm using a .3 mm layer height and 5% infill
@@GalacticArmory oh wow, i figured it was .2 i guess ill try .3 and see how it turns out. Amazing work btw it looks very good when finished
i already have one ordered
My 11y/o son wants me to make a commander Wolffe costume. Any advise on where I can get the templates for the helmet?
I got this one from do3d but there's a free one on thingiverse
You should do a fordo
Excelent!
Awesome! Is there somewhere I can find the 3d print files to print on my own? I don't see any on Galactic Armory website like you have for other helmets.
You can find the file at Do3d.com
Hey I also wanted to ask I want to print my Star Wars stuff for cosplay what printer should I get
Lilrobi45 Xxx
A 3D printer
What kind of 3D printer
Lilrobi45 Xxx
A big-ish one.
I don’t know, you should probably ask someone that knows how 3D printers work, or ask a Print, Art, Craft or stationary shops.
what grit of sand paper would you recommend using?
I use 150 then 300
Galactic Armory thanks so much! I’m completely new to this and I plan on buying my first helmet (this one) within the next week or so!
@@BLMP517 that's great! Let me know if you ever have questions
Is it easy for the rangefinder rod to snap off
Only if you dropped the helmet on it
Hey man I was just wondering if you have any plans to add the clone paratrooper helmet to your list
Yes, I'm working on a tutorial now!
Hi great job, where did you get the visor ? Continue to make helmets and hope that you show us the other piece of armor.
Thank you! Here's a link to the visor: etsy.me/2wea6na
Wanting to print one of these, do you have a link for the file? Cheers
Prolly not since he would make less money of it
Can u put more captain rex helmets for sale
So can u just slide this on with out trouble
Once it's complete, yes!
Can u some more captain rex animated helmets for sale
The dislikes are from his comrades who don’t like him for taking his inhibitor chip out.
And if u do it make templates
Make commander gree from rots
I got a challenge for u I dare u to make a Eva foam captain rex phase 2 animated helmet wearable
Too little visir? Isnt it:"Too small visir"
If u do I will help advertise ur stuff