Video není dostupné.
Omlouváme se.
Tax Tiers on Sharp XE-A21S and XE-A201 registers
Vložit
- čas přidán 7. 02. 2013
- This video shows how to reset the registers, Add tax to Tiers 1-4 and how to add the tax tiers to the department keys. To skip reset go to 5:30 of video for Tax info.
The below is the programing of tiers 1 to 4. In video I hit the @/FOR after putting the tax rate in but that is not needed if you are leaving lowest taxable amount at 0.
#/TM/SBTL - 9 @/FOR [TAX NUMBER 1 TO 4] - @/FOR - [TAX RATE (9% SHOWN)] - #/TM/SBTL - CA/AT/NS
For the below comment is the formula for assigning the Tax Tier to the department keys
10073 - @FOR - DEPARTMENT KEY (OR DEPT SHIFT - DEPT KEY) - CA/AT/NS
Thank you so much ,,you was a huge help! I open my resturant tomorrow and you save my butt,,thanks a million,,,,,
Glad to help. And good luck in your restaurant
Thank you so much for sharing... This video is awesome... You saved my day 😄
The manual is not as far off as it seems. It is just hard to understand. Once you know what you're doing with it the manual becomes much easier to read and understand.
thank you I just follow your instruction program my sale tax to my sharp xe-a203 it work.
Very cool. I hope I can figure this thing out with the help from this video. Thanks for posting it.
The XE-A201 is the same exact model as the one I have except for the digital part has a different cover. They are identical programming.
How do I get my name, date, time and tax collection to save on my XE-A201 cash register. I program it to work and it's good for the day, but it disappears on the next day when I open the register again. How can I save the information. Thank you.
I need the program CD for the XE-A21S register. Can you tell me how I can locate one.
thank you so much
is very helpful
For some reason, I am unable to reply to your comments Dago Lopez and otoniel nunez so I will reply as a post.
Dago, I do not understand your first question. Your second question I can not help you with other than telling you that it can be converted into foreign currency, but only with an exchange rate. The symbol would probably be a Euro...
otoniel, use the following formula for clerk names - #/TM/SBTL - 5 - . - *line number(clerk 1-6) -@/for- Clerk name - #/TM/SBTL - CA/AT/NS
Hola tengo una pregunta... Como puedo eliminarle el punto decimal a la sharp XE-A201 tambien quiero cambiarle el signo de dolar a Colón ? En español
thank you so much that was helpfull
Great video - my problem is when I give a customer a discount the cash register charges the tax on the gross amount not on the discounted amount - any ideas what I did wrong?
how to operate cash register xe-a41s Can Help Out With This Specific Cash Register? I Will Appreciate It A Lot. Thanks
Dank you 👍👍👍
COMO HAGO PARA OIRLO EN ESPAÑOL. NO SE INGLES. TENGO PROBLEMAS CON MI CAJA REGISTRADORA.
how can i program exclude 5 % tax to model sharp XE-A203 as its comes with include tax 5 % in the bills thanks
Hi, I need to add a Business Name to my register, could you help with that? :)
How do you set a clerk name for the receipts. the video says its easy and on the manual but there is no information regarding that in the manual
I want to know where the 10073 comes from... I have XEA113, but it's pretty much the same. Thank you.
How to set up a date and time pls help ?
thank you!!!!
where to get the drawer and lock key
The steps following 10073.... at what point are you 'telling' which Tax Tier is assigned to a particular Department? Different departments are assigned different Tax Tiers.. I am not seeing where the tier is being selected for assignment. Thank you
If you are still wondering where the 10073 comes from, I figured it out.
The number is actually 00010073:
The 1st number is whether you want to use vat4 (0 = no, 1 = yes)
The 2nd number is whether you want to use vat3 (0 = no, 1 = yes)
The 3rd number is whether you want to use vat2 (0 = no, 1 = yes)
The 4th number is whether you want to use vat1 (0 = no, 1 = yes)
The 5th number is whether you want to immediately want to finish the transaction (like pressing CA/AT/NS) or to continue (0 = continue, 1 = finish) (usually you want to use 0 and just press the CA/AT/NS button)
The 6th number is whether the number is positive or negative (0 = positive, 1 = negative) (you probably want to actually charge people, so leave this positive)
The 7th number is the maximum amount of numbers the transaction can have (range from 0-7 default 7, 7 would give you maximum 9,999,999 dollar)
The 8th number is the allowed types of inputs (3 = all, 2 = only pre-set values, 1 = only open values) (if you are not sure, just use 3)
It took me some time to figure this out, but this video together with the manual made me figure it out eventually.
Good luck everyone
hi i have a sharp xe a202a i need a button with 5 % tax and one with no tax
Bendiciones. Como le quito el impuesto?
How do you change out the department buttons so i can put the name on the button
How do you set up a tax rate on just one department and not the others? I need a tax rate on Department 3, but not on department 1,2, and 4.
I am sorry for taking so long to get back to you. I did not get any notifications. You can click on the 5:30 and that will bring you directly to the tax tier part. Instead of putting 1 in for the tax tier just press 3. And set that specific one however you need to.
Hi, thanks for the video, the xe-a201 has no @for key. Is there a button im not seeing or an alternative?
what is wrong if we are in the middle of checking someone out and the register just keeps saying pppppppppp and its NOT out of paper!!!!!
I am not exactly sure of your problem. If you changed the paper and it still says it then you hit the clear button. After that it should be fine. Otherwise I do not know what to say.
i had XE-206 but looks the same key everything are they can be use the same programming?
Can I have different prices for different departments
Anyone know where to get the keys?
How can I program tax for D11 and D12 ? 1-10 are arleady programmed but i cant seem to specify those 2 buttons
Lynne Thomas-Harrison Sorry, I sold my two registers and no longer have the manuals. The only info I have for these registers is in this video
I need to program department 10 to be none taxed and 1-9 to be 9 percent. Right now it set all 1-10 to be taxed. Any help?
did you ever find out how to do that? that is what I want to know too
When I give a discount the tax is still charged on the gross cost of the item not the discounted price. Is there a way to fix this?
+Replays since 1990 I moved to China, so I no longer have the registers or the book. A simple solution is to use a calculator to get the price you want. Once you know what you are going to charge, just punch in the price and hit any key that is set with a tax. It will then charge the tax for that amount.
If you are not charging a tax, you can do the same thing, just hit a key you have set without tax.
Also, I tried to set the date and time just as you did in the video and it gave me an error message :(
+Angela Lail never mind, was hitting the wrong button. Just programmed the date and time successfully. Thank U :)
I have an error message on cash register....Error/..
How do I fix this?
Make sure all the basics are correct such as the roll of paper is in place correctly, all things are secure and then hit the cl button.. Also be sure the key is turned into the correct position. Other than that I would not know what to tell you.
how do I do "notax" ?
Me gustaria si el video fuera en español gracias
También lo necesito en español, requiero programar la misma registradora.
What is the code to do non tax and what is the code to do tax 2?
singh4244 If you want to set the first tier as no tax, it is- #/TM/SBTL - 9 @/FOR [1] - @/FOR - [0] - #/TM/SBTL - CA/AT/NS
For tax 2- #/TM/SBTL - 9 @/FOR [2] - @/FOR - [TAX RATE (9% SHOWN)] - #/TM/SBTL - CA/AT/NS
como puedo cambiar el nombre de la registradora?
Sorry, I do not speak Spanish, so I can only reply in English. It is simple to name the clerks, if that is what you're asking?
as I can rename the register, thank you
I do not have the book with me at the moment, so I do not know what to give you for the formula
how do you assign tax tier 2 to dept 11?
Ok, I see, it would be 00100073 for the starting code. Thank you
it's the XE-A202