Do Edge-Core Magnets Make a Difference? Cubermod DaYan Guhong ProM Review
Vložit
- čas přidán 22. 07. 2024
- Links:
Cubermod Dayan Guhong Pro: www.cubertime.com/products/cu...
Dayan Guhong Pro: www.cubertime.com/products/da...
New Cubes: www.cubertime.com/collections...
Cubertime: www.cubertime.com/?source_typ...
Make sure to use code 'speedminxer' at checkout at cubertime to support the channel :)
This video goes over the Cubermod DaYan GuHong Pro and compares it to the standard version to see which cube performs better. We also go over the difference that Edge-core magnets make and ultimately see which one is worth buying.
Timestamps:
0:00 Intro
0:16 Way Too Many Magnets
0:54 Edge-core Magnets
1:10 Cubertime!
1:25 Does it Make a Difference?
2:43 Thanks for Watching!
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝ and like
#3x3 #speedcubing #dayan
Music:
Ghostrifter Official - Sundown Drive
Do Edge-Core Magnets Make a Difference? Cubermod DaYan Guhong ProM
If you see this, you are awesome :)
Man this is fire!
🔥🔥🔥
good review! small nitpick is the music is a bit loud 😅
Thank you so much! I'll make sure to fix the music volume next time
Are the core to edge magnets glued in the slot or are they snapped in? Curious if one could easily mod it. Also is the edge to corner magnet in the edge in a plastic groove or is it just glued in? I don't want to buy this and mod it if it's not durable.
I just opened up the pieces and I'm pretty sure both the edge-core and the corner-edge mags are glued in. Since there's I can see a little glue residue around in the inside of the edges. Up to you if you wanna mod it :)
Thanks for the reply. I might be brave enough to try it when some else finds the right magnet strength for it.
You mean core to corner magnets because there are no core to edge magnets .
There are core to edge magnets in the modded version!
@@hamerraythere is a small hole for adding a magnets in the edges
W video no cap
frfr
Uhmm I don't if I am this late to ask a question for modding my Guhong pro M but, how do I install the magnets in the edges?
Is north pole to north pole in magnets?
Or south pole to north pole in magnets?
And is the edges only have no magnets? Like no need to add some magnets on the ball core?
Thank you
You need the correct sized magnets and super glue. For the polarity, you need to makes sure it's flipped the right way.
To do so, just place the magnets against the ball core in the way that it repels the core, if it attracts, just flip the magnet and try the other side. Once you are certain about which side of the magnets is the correct polarity, super glue it on to the edge.
It's hard to explain in writing but I hope this helps :)
@@SpeedMinxer Thank you very much !! I now understand how core edge magnets work.
what is the magnet size? so that i can mod mine?
I believe it's 3x1mm, according to the cubertime website
@@SpeedMinxermay i know the magnet strength of each magnets?
Sorry, I'm not sure about the strength but it's quite subtle when turning
@@sulpicioedogawa4869I suppose n35
All the cubes are made in China
Yep