Jeep Wrangler JL & Gladiator JT AUX switch bank install from Lasfit
Vložit
- čas přidán 25. 02. 2021
- This is an updated video. When you're going to install the red switch, which is required to connect to the canbus wirings.
The AUX Switch: www.lasfit.com/products/jeep-...
👉Get Your Free Test of the Newest 2023 LED Bulbs at Lasfit! Join us now to grab this limited-time offer. Don't miss out!
LINK: www.lasfit.com/pages/syle-vid...
NOTE:
These switches were upgraded and the black buttons are not pre-labeled now. More importantly, the mount brackets are applicable for all trims except manual transmission
If you have any questions about this switch kit, please leave a comment below.
Lasfit has been developing more and more top-quality auto products, high performance with affordable price for you guys.
Subscribe to Lasfit channel and tell us what you need.
Thank you for your support! - Auta a dopravní prostředky
Limited sponsorship for Newest LED Bulbs Testing Provided.
Don't hesitate to contact us to grab this opportunity.
1. Contact email: youtube@lasfit.com
2. Please tell us your vehicle make, model and year
Great job explaining the whole process mine went very smooth with you video, thanks
Hey guys,
These switches were upgraded and the black buttons are not pre-labeled now. More importantly, the mount brackets are applicable for all trims except manual transmission.
Are these available for the RHD models?
Why doesn't this work with a manual transmission~?
@nathanshufelt6191 figure it has to do with the clutch master cylinder being in the way. At least, that's all I can figure.
@@matopezuta2050 Hi, our system is not compatible with manual transmission, but if you have some methods to safely pass wires through the firewall to your Jeep, then it may work. However, we do not recommend applying our system to manual transmissions in case of any potential risks caused by improper operation.
The black switch only turns on when the engine is on also the red switch correct? Why the black switch don't have the canvas cable and only red switch has canvas cable why?
Are any of the switches able to be operated without the key on? Or is there ability to have some not require the Jeep to be in ACC or ON position to operate?
The switches need to get the power to work, it requires the Jeep to be in ACC or ON pisition to operate.
Any chance somewhere down the line different/swappable buttons are offered?
Hi, these switches were upgraded and the buttons are not pre-labeled, you could check the updated pictures from this page:
www.lasfit.com/products/jeep-gladiator-jt-2019-2021-auxiliary-switch-kit?Social&YTB+Channel&JGS
Can you buy just the driver side red buttons without the RJ45 connector?!? I already have the mopar aux switch on the passenger side?!?
Yes, you can buy just the driver-side red buttons, the RJ45 connector is included in the package. You can keep it for spare use.
You can check more details from this link:
www.lasfit.com/collections/jeep-auxiliary-switch-kit-1?Social&YTB+Channel&Jeep+Switch
I should have bought red switch before you changed the labels as I personally love the air and gas labels! 4 months too late at finding this product
😂🤣 You'll get used to it after using a period of time. haha
The drivers side brackets do not work on a 2022 ecodiesel.
The fender mount will not work due to the master cylinders drain being very much in the way and the firewall mount space is already being used.
I had to bend the snot out of the factory firewall mount and mount both the lasfit and factory relays in that one spot.
Yes it looks horrible,but what else can I do as I can't cut off the master cylinder drain as i would have no brakes.
Lastly ea switch panel has a can bus plug,yet only one can be used and I have no idea which one that should be.
I would have expected a T connection so both sides could be ran to the canbus.
Hello,
Thank you for your feedback.
May I know the trim of your Jeep JL?
Could you kindly contact us for tech support by email? cs@lasfit.com
Thank you
@@lasfitvehiclelife
It's a jt gladiator willys ecodiesel.
I'm still having problems with it.
I first plugged the one and only canbus wire into the black switches on the right and my jeep would not start or even go into accessory mode.
I thought I had drained the battery and hooked the battery up to charge it but after a length of time that did nothing.
Then I pulled everything back apart to troubleshoot and ended up plugging the red switch bank into the canbus.
Now my jeep runs,but the yellow lights do not work on the red switches,only the black side that isn't connected to the canbus.
Sure would be nice if a simple set of instructions were included to take out all the guess work.
I will have to pull it all apart yet again to figure out why the red switches don't work and I have no idea what to do next.
I did this 2 days ago and have been to frustrated to mess with it since.
Oh and I'm an industrial mechanic by trade and work on industrial machines alot more complex,just so you know I'm not an amateur.
I could only imagine someone with no experience in mechanical/electrical would do with this situation.
It would be very easy to simply add a set of detailed instructions for each situation.
I watched videos and they were all on gas engines not one was/is on a vehicle like mine and not one shows what to do with the extra canbus connection or exactly which of the two to connect to as i could only use one.
They are packaged extremely well and look great,but lack in other areas.
What is the ethernet looking port in the middle used for? 🤔
Thanks for your interest in our products! This port is used to connect the Walkie-Talkie.
If you only purchase the right side buttons is there a provided half storage bin for the left side?
No storage bin is provided at the moment. You can consider to install the whole switch bank.
What's your vehicle make, model and year?
@@lasfitvehiclelife I have a 2021 Wrangler Willys JLU I don’t want the other half, so what’s the solution if one doesn’t come with?
@@lasfitvehiclelife I have a 2021 Wrangler Willys JLU I don’t want the other half, so what’s the solution if one doesn’t come with? I'm trying to retain as much storage as possible
@@jamesalverson4112 The solution is named Volswitch JL300
Will this work with the factory instrument panel bin? 6CB87TX7AA. I do not want the bin with the RJ45. Do the buttons say anything on them or do you have to put sticker, I notice a comment saying they are not labeled. Also do you have a black unit without the chrome trim.
Thank you for the message.
Yes, it can be installed on the factory panel bin. These switch panels are used to replace the factory storage bin without OEM switches. What's the trim and year of your Jeep JL? Does it come with factory red switches, black switches, or without any switches?
This switch panel does not contain the sticker label, and the buttons have fixed icons.
The current version of this switch panel is a black unit with chrome trim, and the previous version is pure black without chrome trim.😂
You can get more information about Lasfit switch panel from this page: www.lasfit.com/products/jeep-gladiator-jt-2019-2021-auxiliary-switch-kit?Social&YTB&
@@lasfitvehiclelife Thanks, I went ahead and bought the new version (single black switch), and ordered the bin from the dealer. Figured out they say aux on them now which is fine, I was afraid you removed that and supplied stickers which is not the case. I just have a Willys without any switches, it's all black but the panel above has chrome/aluminum trim so I'll see what it looks like, I imagine the trim is a plating of some sort and if I want it black I can sand off the plating?
@@jeffjenkins4976 Hi, our package doesn't contain the stickers, please be reassured.
We haven't tried sanding off the plating, but I don't recommend you to do that.🤔
By the way, could you please tell us whether you have bought Lasfit Auxiliary Switch Panel?
@@lasfitvehiclelife Yes, I bought this kit Jeep Gladiator JT 2019-2023 Auxiliary Switch Panel Bank Kit KIT A (1 Black Switch). It matches up with the trim fine. I already have it and the switch have the generic Aux labeling which is fine, yes the trim is not black underneath so sanding it is not an option, it should be OK as is since the trim around the window switch is chrome/aluminum looking too. I imagine the reference to removing labeling was specifically referencing like spot, roof, etc on the buttons?
@@jeffjenkins4976 Thank you so much for your feedback and for your support of Lasfit.
Yeah, I think so too. But you can label by yourself to identify the control devices if you want.
Is it convenient for you to share some photos or short videos to show how these switch panels perform on your Willys？ Thank you in advance!
How do you run the wires through the firewall with a manual transmission?
Hi， could you please tell us your Jeep's Make/Model/Year?
Unfortunately, our system is not compatible with manual transmission. But if you have some methods to safely pass wires through the firewall to your Jeep, then it may work. However, we do not recommend applying our system to manual transmissions in case of any potential risks caused by improper operation.
You can check more information about Lasfit Aux switch from this page: www.lasfit.com/products/jeep-wrangler-jl-2018-2021-auxiliary-switch-kit?Social&YTB+Channel&Off-road+switch
@@lasfitvehiclelife 2020 Gladiator Rubicon
How does the install change for RHD models?
Hello, the installation process is similar.
Im in puerto rico , do you have an installer in PR
Oh~ We don't have an installer in PR at present.
is there a video showing you connecting lights to each switch?
What lights do you want to connect to the switches?
We'll update a new video when we get a chance.
What's the trim and year of your Jeep Wrangler?
2021 JT
What to install light bar
Just finished installing both switch banks
Plugged in 12” light bar to red side air compressor switch and didn’t turn on
Can it be installed on a 2021 Jeep Gladiator diesel?
Yes.
Are you going to install LED off-road lights?
@@lasfitvehiclelife Yeah I wanna install lightbar and a trainhorn. But when I went to order the auxiliary switch on the mopar website it says not for diesel so I'm confused
@@jbigtruss5301 Could you take some photos of your OEM switch(console) to send us for a look?
please send photos to youtube@lasfit.com
Thank you~
Not on a 2022 ecodiesel.
There's absolutely no way to make the fender bracket work due to the master cylinders drain being in the way and there's NO way to get around it and it can't be removed.
There's a factory relay box mounted to the firewall that's also right in the way.
I had to smash and bend and tweak the bracket for the factory firewall mounted relays in order to mount both those and the lasfit in that location as nothing else would work.
Lastly you only get 1 mail/female canbus cable and each switch panel has a male connection.
So there's no way to hook both up and know way of knowing which side should be.