CHEVY SS gets DIY LED Custom HEADLIGHT BUILD!!
Vložit
- čas přidán 16. 07. 2024
- In todays video i show you how to build a set of headlights for less than $100. Thanks for watching and have a great day.
DONT CLICK THIS: bit.ly/2uMbIrF
Follow me on Instagram @B_Mautofied
#BradzBuildz #SS #DIY - Auta a dopravní prostředky
This is Awesome, my ranger doesnt have good aftermarket lights and this videos is super helpfull. Definitly a great videos!!
Great tutorial bro. Awesome work. Made it look easy
Just a tip: Heat your rattle cans up when it's cold, it helps...either rotate the can in front of the heat gun/shake the can (and repeat) or boil some water, let the water sit for a minute or 2 to cool down a bit, then set the rattle can in the water for a few minutes. You will notice a HUGE difference. 🤘🤘
You are correct. But here is an additional tip for boiling hot water. Shake the can every few minutes and sit it back in the hot water. You will see right after shaking the can it will cool down. You want the whole can after shaking to be warm to slightly hot. Also you can get amazing paint jobs out of a rattle can, that lasts a very long time. It's all in the prep before paint, the prep before base coat, and after coat work. Setting up a mini paint booth and baking for the paint job goes a long way also.
Looks like a pro worked on them, keep up the good work bro.
Looks legit 👏
If u would’ve used aluminum tape in the back of the housing instead of the black paint they would reflect the light much better and brighter
Great vid
Thank you 🙏🏻
👍
I want to learn led lights for cars please
Is there a way to make the led strip blink in rhythm with the turn signal or is this the only way they can be wired up?
I think this is the only way to wire them up as far as I know.
That's a pretty sweet mod
Thanks man
BMautofied I would have never thought to go that route lol
It may not look as good as the $300 ones but they aren't to bad for less than $100
BMautofied looked pretty good to me, but I'll see em in person soon. 🙏🏼
Ide like to see how you wired them in
Well, I no longer have the truck or the lights but if I remember correctly the yellow wire goes to the turn signal’s and the red wire goes to the daytime running lights.
One year later...must say very informative video simple and effective....tell me how they holding up after a year😁😁😁
I actually sold them and the truck but they worked great other than not keeping the chime behind the headlight builds. No reflection at night makes it hard to see
Are the low beam still bright even tho your painted the chrome?
No, I would recommend taping off the chrome area around the bulbs. It was hard to see at night after painting the whole thing.
@@BradzBuildz great thank for response
What did you use to attach the led strip to the head light
They came with some clips and screws for the clips
Great video, but I wish you would have shown the wiring process. I want to do something like this for my car but I don't know anything about wiring and that is the only thing that is giving me pause to starting this type of build.
Black wire is to the battery, Red wire is for the headlight or daytime running light and the yellow wire is for the turn signal.
Do you wire the led strips up to the head light wires? Or do they go somewhere else?
They wire into the blinkers and daytime running lights
Ok awesome thanks
Can u cute the led light bar , for better fitting
Cameron Duran I’m not sure about that
Cameron Duran I found out the light bars can be cut and still work
@@BradzBuildz that’s awesome! Can’t wait to make my own set!
Do u have the link for the led strips?
Miguel Partsam 45cm Switchback LED Strip... www.amazon.com/dp/B0154AP7LC?ref=ppx_pop_mob_ap_share
Look cool, but now you have no low beams
Pro tip: splurge on led light going inside the headlight as replacing one means opening the whole headlight again which isnt something that can be done on the side of the road so buy something that will actaully last the lifetime of the car not some pods that cost 15 bucks and fry themselves after 1k hours
Wtf was that camera work at the 7 min mark
That would de me having my time lapse setting wrong. It’s been slowed down as much as I could but it was recorded in way to fast of a setting.
Link?
Partsam 45cm Switchback LED Strip Lights DRL Daytime Running Headlight White-Amber Dual Color 2pcs Flexible LED Tube Side Signal Light www.amazon.com/dp/B0154AP7LC/ref=cm_sw_r_cp_api_glt_fabc_K3HM1SNR42XV018M0MM2?_encoding=UTF8&psc=1
????????!!!!!!!!!!!!!