How to make a leg vise for the workbench. DIY leg vice
Vložit
- čas přidán 5. 09. 2024
- How to make a cheap leg vise that is very easy to install and remove from the workbench. In this leg vise build I use a metallic clamp and some pieces of wood that I could find in my woodworking shop. So now I have a vertical wooden bench vise that will be very helpful to clamp wood in my workbench. In the second part I will improve this workbench vise and I will show how to use the pin board to keep the leg vice parallel with the workbench. This amazing woodworking project sure will help to work in many project ideas in your shop.
- Second part on how to improve this leg vise for workbench:
• It should be in every ...
- Watch here how to make a workbench moxon vise out of to cheap metallic clamps:
• How to make a cheap mo...
- More about my homemade woodworking shop:
• Homemade woodworking shop
More woodworking projects in my channel and in my woodworking blog:
enredandonogar...
/ enredandonogaraxe
/ enredandonogaraxe
Briliant! THIS is innovation not the one that comes with a lot of money.
I literally can't even afford the threaded wood or metal rod for a typical leg vise. You just made this possible for me. Thank you!!
Sometimes simplicity, intoxicating and amazing, Creating your own from simple, cheap materials gives you great creativity and pleasure. You are a great carpenter, and you deserve great respect!
Thank you very much 😁. I love how nice and how useful this leg vise is 😃
That works great and won't break the bank. Solid project.
I agree with you 😃
Great job
Of all your videos, this one one inspired me the most. A very clever idea, and it obviously works well. I had never even considered installing a leg vise before, because commercial products just cost too much for the amount I thought I might use it. However, with one built so cheaply as this could be, I am certain to make my own. Thank you very much for this.
Thank you very much :D I hope this leg vise will be very useful in your woodworking shop. In my next project I´ll try to improve it a little bit.
Excellent!!
Very informative. The fact that it can be removed when not needed is great. I am going to copy this. Thanks for sharing.
It can be removed and yet be used as an usual bar clamp 😃 Thanks for watching
Thank you! This is super smart
You're the best. So clever, so simple, so honest. Brilliant 👍
Hi Sir! I have watched some of your videos in the past and love the projects you have created. I was scrolling through videos for ideas for my workbench and came across the leg vise. I will be adding this to my bench. I love the fact that it is not a permanent piece so if I should decide to upgrade my bench I can remove it from my current bench and add it to the new. I have subscribed so as not to miss your videos. By the way, your English is excellent and spoken more clearly than some Americans I know, lol.
Thank you very much. this is one of my favorite woodworking projects 😃. Also thanks for the comments about my English, because that encourages me to keep translating my videos 👍😃
I found your channel through watching a different wood worker and I am so glad that I did! You are amazing and am so proud of you for your originality and creativity, everything is simple but Works just like you spent $1,000,000 on it. Not everyone has money to just go and buy the best tools out there but the ones that you have made work just the same if not better! so great job buddy. As a small, short girl, it is hard for me to use a lot of the big and heavy tools and Jigs so this has given me help with holding and working with the awkward size woods and tools. Thank you so much for your ideas they’re amazing.
Thank you very much 😃 and thanks for watching and subscribing 👍
I love it! Well done. I could listen to you talk all day! I love the accent and the very clear concise explanations.
What a brilliant craftsman you are! I am very impressed with your ability to make your own tools. Well done!
Thank you very much. I've been some time thinking about making this leg vise, and it was great that everything went easier and nicer than expected 😃
Nice and simple, but highly practical design. 👌
Brilliant idea, mate 👍
Thank you very much Bill
I don't know where you get your ideas from and they're fooking genius. Thanks for sharing.
Excellent idea. Well done
Great idea! I love the concept of keeping the bar clamp functional away from the vise!
Yes, but not only functional but also easy to remove from the leg vise 😃
Nice
very helful man! will do this as my starting workbench.. Thank you for this video idea🥰♥️💪🏽🙏
Very clever, love all your videos.
Subscribed.
Excellent idea.
Instead of dowel boards, how about a kick-board. See Jay Bates' pine and hickory workbenches. I think it would simplify construction and clamp-time.
Thank you :D Well, not sure a kick-board would be easier to use. And the leg vise looks much more nice when we install the dowel board :D
nice so practical till I can afford the big bucks hardware
Thank you very much Anthony 👍. Maybe one day you will say: OK, this kind of vise is so useful that it is worth to buy the nice hardware 😃
Super Schraubstock, gut überlegt.
Vielen Dank Alma 😃
Thank you for doing the video in English! so we all can understand. I speak Spanish.
Nicely done & very creative! Looks like it will do the same work as purchasing an expensive vise, great job...
Well, it doesn't work as smooth, but I'll try to improve it 😃
That's a clever idea for vice!
Great and easy solution
السلام عليكم ورحمة الله وبركاته شكرا عمل جميل
That was awesome!!!! Thank you very much
Very good idea, you always need an extra occasional vice
Thank you. After I build this leg vise, it was a surprise that it clamps so hard 😃
Sergio you da man
Mal wieder ein echter Knaller an präzion 🤗👌👍👍👍
Vielen Dank Dieter :D
excellent project
You are good! I think I will use this idea for my bench. Thanks for sharing my friend.
Sure you will find it very useful 😃
Just FYI if you move metal files back and fourth you will doll them, only move them forward then pickup off the surface and push forward again.
Great idea and well demonstrated!
As always: brilliant Video Sergio. It's always a pleasure to see news from you. Keep going dear friend we will keep following you. Rgds from Germany, Robert.
Thank you very much Robert. Soon I will improve this leg vise :D
بسيطة وعملية في نفس الوقت ممتاز 👍
شكرا جزيلا ابراهيم
Simple clever idea! I like it!
Great idea
Nice idea man .Thanks .
Ingenious!
Another great project!
Nice job !
Thanks for sharing and showing that
You are very cleaver man👍👍👍
That is very clever! You could have patented the idea and become a very rich man :)
Un buen trabajo Jefe me gusto la idea gracias por el video :)
Awesome!
GENIUS !!
Excelente trabajo, gracias.
Deze neem ik ook over 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Σωστη και εξυπνη δουλεια !!! trabajo correcto e inteligente
I was just about to plan to add a leg vice on my workbench and yours is the most simplest and cheapest and functional work piece i ever saw! What is your leg vice thickness ? Im planning to use a plywood (hardwood) for this project :)
جميل
🌹
Clever idea Sergio! Thanks for sharing :-)
The most innovative part of this plan is using adapting the bottom peg-board by creating two boards that fit on both sides of your 4x4 leg (or post). Instead of using your style of metallic clamp, I should be able to use a Harbor-Freight pipe clamp with holes drilled in the vise leg and two legs. I think!
Do you have a video of how you made what looks like a jigsaw/bandsaw.
Look his older vids. There are some about his jigsaw table, I think it was in 2 or 3 parts. With some good ideas, as I remember. His one was my inspiration too build my own one.
@@reinharddecker4650 Thank You
Yes, you can find the videos in my channel :D
Hallo, wauuuuuuu great idee. It's work good.
First :-)
You do more with less...
Thank you very much :D Soon I will upload the new video where I show how to improve this leg vise :D
Clamp these nuts
But it’s called wood, not lech!
Nice