Change out the Springfield Armory rail mount for a much better Sadlak mount. An all steel mount that in far better than most others. Then change your scope rings to a serial numbered matched pair of GA Precision scope rings. Available only on GS Precision's web site. Attatch the scope rings to the most forward and most rearward slots on the piccatinny rail for success. If you are using a standard walnut stock. Look to Bradly adjustable cheek rests. No drilling the stock. Uses Velcro straps for attaching to the stock. Adjustable for all sizes.
If you want to get the Bradley adjustable cheek rest. The Chocolate Raptor color matches the walnut stock the best. They have all kinds of colors and camouflage styles. Adjustable for all cheek heights suitable for everyone.
I have a standard m1a I put a wood stock on and spent 180$ on parts. the rifle was 1300$ new when I bought it . I did all the work and now I get 1 3/4 at 200y. I shoot no hand loads. It is an accurate rifle.
sage chassis where very temperamental even for the army. they have to be torqued just right or the groups fall apart. they are all that way. the snipers were having problems with them thats one of the reasons the army got rid of them..they look cool though.. yours is the best setup.. try those groups again with a scope. you will get better results.
Glad to hear it wasn’t just a me problem. Today I went out with some glass on the gun and it shot phenomenal groups and at distance it performed as good as I could want
Hey brother I have recently dived head first into the m14/m1a and have ended up with the gun you have there but wood stock and also the SOCOM 16. Have not stretched the legs on the yet just some 50 yard shot so I can’t say much yet as far as accuracy but I have a channel hillbilly check it out if u want to see the pews. But great advice brother and the gun blue guy is awesome you’re also right about that..
Those Sage chasses are known to lose accuracy without having an armorer to mate the system to the rifle. The M14 is a very temperamental platform in this way. If you ever have it sent out for conversion to an M21, M24, or M14-EBR, just know that it has to be sent back to the armorer/gunsmith about every 4,000 rounds to be thoroughly serviced and checked over to keep the accuracy gains those accurized platforms can boast.
Great video man! I have a Socom 16 and love it. Although not as accurate as my 2.5k AR10 it is Orders of magnitude more reliable. (I also haven’t done anything to improve accuracy like you have)
@Threat.level.midnite ill update you when I get it. I live in oregon and didn't have time to go to the store today, and they have stupid background checks. They have been putting me through a queue. [Wife had a stalker we both called the cops on the guy... already have my concealed carry... went to buy another gun and boom... queued... It's amazing how I get queued buying a tool made for self-defense...] I've seen a lot of good reviews on it, and it's definitely affordable. Which means I can get more expensive accessories.
Thanks! I bought 500 pulled 147gr and can’t find any data in the manuals, I’ll be shooting out of my early M1A super match that I too recently scoped with a Vortex low cost scope and a Basset machine low mount.
WTF happened at 10:38 minutes in??? It looked like a live round bounced up out of the mag/action following a spent casing and then just fell back into place…? The bolt stayed open too. That was weird to see
You sir are a keen observer because that’s exactly what happened hahaha. I have some old GI mags where the last round slips past the feed lips but not with enough force to eject…it also does it fast enough to lock the bolt when it happens
@@Threat.level.midnite Crazy. I had to watch it a few times to figure it out but it stood out as soon as I saw it the first time. Never seen that happen. My scout squad is one of my favorite rifles to shoot and in general. Great video🤙🏻
Change out the Springfield Armory rail mount for a much better Sadlak mount. An all steel mount that in far better than most others. Then change your scope rings to a serial numbered matched pair of GA Precision scope rings. Available only on GS Precision's web site. Attatch the scope rings to the most forward and most rearward slots on the piccatinny rail for success.
If you are using a standard walnut stock. Look to Bradly adjustable cheek rests. No drilling the stock. Uses Velcro straps for attaching to the stock. Adjustable for all sizes.
I hear good things about the sadlak. It was next on my list but I made a few changes and got this thing really dialed in
If you want to get the Bradley adjustable cheek rest. The Chocolate Raptor color matches the walnut stock the best. They have all kinds of colors and camouflage styles. Adjustable for all cheek heights suitable for everyone.
Gunblue490 is great, as a teacher and every other way.
Yup he’s a great dude!
absolutely had the same problems with my new springfield m1a, still working on it as I don't shoot much, appreciate the info
Hope it helps! I know how frustrating it can be
Your helper is awesome!
Interference with the tripod and squeezing the stock will cause a wandering zero .
I thought it might but the groups held quite tight. I’m not sure I could have done any better with irons
I have a standard m1a I put a wood stock on and spent 180$ on parts. the rifle was 1300$ new when I bought it . I did all the work and now I get 1 3/4 at 200y. I shoot no hand loads. It is an accurate rifle.
Nice! I’m going to run 147s next week just to confirm it’s accurate with even the lightest factory loads I have
sage chassis where very temperamental even for the army. they have to be torqued just right or the groups fall apart. they are all that way. the snipers were having problems with them thats one of the reasons the army got rid of them..they look cool though.. yours is the best setup.. try those groups again with a scope. you will get better results.
Glad to hear it wasn’t just a me problem. Today I went out with some glass on the gun and it shot phenomenal groups and at distance it performed as good as I could want
Hey brother I have recently dived head first into the m14/m1a and have ended up with the gun you have there but wood stock and also the SOCOM 16. Have not stretched the legs on the yet just some 50 yard shot so I can’t say much yet as far as accuracy but I have a channel hillbilly check it out if u want to see the pews. But great advice brother and the gun blue guy is awesome you’re also right about that..
Cool man! Good luck on the M1A quest and I’ll check out the channel for sure!
Those Sage chasses are known to lose accuracy without having an armorer to mate the system to the rifle. The M14 is a very temperamental platform in this way. If you ever have it sent out for conversion to an M21, M24, or M14-EBR, just know that it has to be sent back to the armorer/gunsmith about every 4,000 rounds to be thoroughly serviced and checked over to keep the accuracy gains those accurized platforms can boast.
Yeah that’s not a viable option for me to be sending that thing out like that. It runs great how I have it now though
Gunblue is great he knows his stuff! You need to check out delta 14 chassis stocks
Just checked it out! It looks pretty awesome and if I make anymore changes I’ll probably get that for sure!
Best thing about the lighter 147-155s is they wont bend your oprod.
Jeez I did t know the heavy loads were capable of that
The M-14 was developed to use 175 grain bullets. I use 175 mk bullets, or m118 lr military ammo. It wont bend the op rod, your good
Great video man! I have a Socom 16 and love it. Although not as accurate as my 2.5k AR10 it is Orders of magnitude more reliable. (I also haven’t done anything to improve accuracy like you have)
Thanks I’m glad you liked it! And I think with just a little bit of tuning they can all shoot super tight (at least that was my case)
You should put (100 Yards) in the title, liking this video though, thank you!
Thanks for watching did you see the second video and M1A vs bolt gun? In those videos I push the gun out to 750
@Threat.level.midnite that's awesome, I was looking to buy a M1A but decided to get a Ruger Sfar with nice scope.
how do you like it so far? The AR 10 platform is a lot more user friendly for sure
@Threat.level.midnite ill update you when I get it. I live in oregon and didn't have time to go to the store today, and they have stupid background checks. They have been putting me through a queue. [Wife had a stalker we both called the cops on the guy... already have my concealed carry... went to buy another gun and boom... queued... It's amazing how I get queued buying a tool made for self-defense...] I've seen a lot of good reviews on it, and it's definitely affordable. Which means I can get more expensive accessories.
@@Brandon-uf4dt dang well hopefully you get it soon. Keep me posted when you shoot it!
Thumps UP on the video, can you share your 147gr data? Thanks
Gimme a few and I’ll consult my data books when I get home!
Ok the 147 load is 43 grains IMR 4064 with a 2.76 OAL. I’ve also used 42.5 grains of varget and they both produce mid 2600 velocities
Thanks! I bought 500 pulled 147gr and can’t find any data in the manuals, I’ll be shooting out of my early M1A super match that I too recently scoped with a Vortex low cost scope and a Basset machine low mount.
Nice! I actually just bought another box of 500 pull downs as well since I started shooting it in matches lately
WTF happened at 10:38 minutes in??? It looked like a live round bounced up out of the mag/action following a spent casing and then just fell back into place…? The bolt stayed open too. That was weird to see
You sir are a keen observer because that’s exactly what happened hahaha. I have some old GI mags where the last round slips past the feed lips but not with enough force to eject…it also does it fast enough to lock the bolt when it happens
@@Threat.level.midnite Crazy. I had to watch it a few times to figure it out but it stood out as soon as I saw it the first time. Never seen that happen. My scout squad is one of my favorite rifles to shoot and in general. Great video🤙🏻
Yeah it really is bizarre haha thanks for watching!
if your brother needs help with someone getting rid of his hog problem, let me know
He just sent me trail cam with about 30 new ones with babies!
@@Threat.level.midnite he needs some help removing them
Sounds like the learning curve from Call of Duty to reality was a bit steep for you
I don’t know what you’re getting at?
10:00
Get on a bench or sand bags.
It’s all I had at the time