Factory Suspension Setup on Suzuki Hayabusa
Vložit
- čas přidán 2. 09. 2020
- In this video I setup the 2001 hayabusa back to factory specs. The bike was setup so hard for what i believe was racing that the suspension wasnt really doing anything to the bike. If you have one of these bikes and think your having suspension issues, just follow this procedure and put the bike back to the factory settings and restart your suspension tuning from there. Always make 1 adjustment at a time and then test ride the bike when fine tuning your suspension. Dont forget to watch the playlist for other work done to this hayabusa.
Motorcycle Suspension | How does it work?
• Motorcycle Suspension ...
2001 Suzuki Hayabusa Maintenance Playlist:
• 2001 Suzuki Hayabusa M...
Ebay ---- www.ebay.com/sch/torrentperfo...
Merch shop ---- shop.spreadshirt.com/torrentp...
CZcams ---- / torrentperformance
Amsoil ---- ww2.amsoil.com/?zo=5541460
Newsletter Email ---- torrentperformance@outlook.com
Amsoil Independent Dealer # 5541460
Amsoil Becoming A Dealer Inquiry
ww2.amsoil.com/lander/join/?z...
Amsoil Commercial Account Inquiry
ww2.amsoil.com/business-oppor...
Amsoil Retail Account Inquiry
ww2.amsoil.com/business-oppor...
Amsoil Preferred Customer
ww2.amsoil.com/offers/pc.aspx...
Amsoil Free Catalog
ww2.amsoil.com/InformationReq...
Amsoil Motorcycle Lookup:
ww2.amsoil.com/lookup/motorcy...
Amsoil Atv Lookup:
ww2.amsoil.com/lookup/atv/?zo...
Amsoil UTV Lookup:
ww2.amsoil.com/lookup/utv/?zo...
Powersport brake tools:
Momok Large Plastic Syringe, 100ml Syringe with 80cm, 160cm Handy Plastic Tubing for Dispensing, Injection, Filtration: amzn.to/2rDvrbr
Brembo B-Quiet Brake Lubricant for HIGH Efficiency Brakes (75ml/2.5oz): amzn.to/2st71S0
Motorcycle Brake Caliper Spreader Tool: amzn.to/38GX1VW
BikeMaster 1 Liter Pneumatic Brake Fluid Bleeder Motorcycle Tool Accessories - White/Black / One Size: amzn.to/2rP5dmi
Motorcycle Suspension Tools:
Motion Pro 08-0121 Fork Oil Level Tool: amzn.to/36vMniO
MOTORCYCLE FORK SPRING COMPRESSOR KIT, UNIVERSAL, VinGence: amzn.to/2PHx9Ag
Race Tech Foot-Operated Fork Srping Compressor TFSC 02: amzn.to/2EoHT1a
Race Tech Fork Spring Compressor Universal: amzn.to/35rp4qb
Rear spring compressor spring: amzn.to/2PuyyLG
Torque wrenchs:
EPAuto 1/4-Inch Drive Click Torque Wrench (20-200 in.-lb. / 2.26~22.6 Nm): amzn.to/35p45o5
EPAuto 1/2-inch Drive Click Torque Wrench, 10~150 ft./lb, 13.6~203.5 N/m: amzn.to/2YRkrDf
EPAuto 3/8-Inch Drive Click Torque Wrench (10-80 ft.-lb. / 13.6-108.5 Nm): amzn.to/2PooILv
Motorcycle Carb synchronizer:
Motion Pro 08-0411 Syncpro Carburetor Tuner: amzn.to/38IkjL5
ATV Jack and lift:
Dragway Tools 1100 LB Wide Deck Motorcycle Center Scissor Lift Jack Hoist Stand Bikes ATVs: amzn.to/2rQNquP
Grease Gun:
GreaseTek Premium Pistol Grip Grease Gun with 18" Hose and Extension Pipe: amzn.to/2Pm6F8B
Tooluxe 61077L Grease Gun and Lubrication Accessory Kit | Zerk Fittings | Multi-Function: amzn.to/34nG6nK
Ultrasonic Cleaner:
ultrasonic cleaner 30l : amzn.to/35o5NG1
ultrasonic cleaner 15l : amzn.to/2EhAmBo
ultrasonic 10l : amzn.to/34ux8Fy
Misc Tools:
Motion Pro 08-0008 Clutch Holding Tool: amzn.to/2EoGYOg
Bearing Race & Seal Ins: amzn.to/2qYYd5Y
MAXPOWER 7pc (8-19mm) Drive T-Handle Wrench - Industrial Grade, Metric Socket Set Chrome Vanadium Allen KeyECLIP PLIERS : amzn.to/36ELPr2
WORKPRO 13-piece Torx Bit Socket Set T8-T60, S2 Steel: amzn.to/2YRkGhD
Neiko 10072A 3/8" Drive Extra Long Allen Hex Bit Socket Set, SAE, 1/8" - 3/8" | S2 & CR-V Steel, 7Piece Set: amzn.to/2PpwwN6
Neiko 10288A Master Hex Bit Socket Set, 32 Piece | S2 Steel Machined Bits | Standard SAE and Metric Sized Sockets | 1/4", 3/8", & 1/2" Drives: amzn.to/2szvRzp
Slippery Pete Fluid Pump for Quart Bottles - Transfer Gear Oil, Transmission and Differential Fluid with This 5cc Hand Pump : amzn.to/2Eiolf2
TEKTON 6943 Precision Pick and Hook Set, 4-Piece: amzn.to/34q4aq9
Astro Pneumatic Tool 1600 16-Piece Punch and Chisel Set: amzn.to/2YWDFYf
10PC T-Handle Torx Star Key Wrench Set 2 Drive Ends Stand Rack: amzn.to/38A8XZk
Performance Tool W80275 Metric T-Handle Hex Key Set, 10-Piece: amzn.to/35sdOKm
Motion Pro 08-0127 Heavy Duty Spring Hook: amzn.to/34nH2Zi
TEKTON 30508 Wood Handle Rubber Mallet Set, 3-Piece: amzn.to/2RVAQFy
Motion Pro 08-0008 Clutch Holding Tool: amzn.to/2EoGYOg
Thank you!!! This helped a lot! Just did mine and it’s night and day difference! :) A+ video!!
Brilliant video!
Just bought a gen1 Busa 2002 after 32 years away from bikes !
The suspension is rock hard thx for your amazing video to set it back to factory standard 👍
This is going to come in handy as I get ready to do some suspension modifications here this winter. Thanks for the info!
Your welcome
Awesome video, simple strate to the point. Adjusting mine tomorrow. 04 Busa.cThanks
Thanks buddy. Set back to stock. Then if you make adjustments do one at a time before each ride until you find what works for you.
Very informative. Was wondering what the bottom screws on the front forks do.
Thanks very much my friend, greatly appreciated, it felt like I had no suspension
Very useful! I've got a 2004 Hayabusa with 130 000 kms. At 100 000 I had a crash and the front fork had to be replaced - second hand telescopes. Since than I was suffering from the bumpy Hungarian roads. Few weeks ago came into my mind that the settings of the second hand telescopes might be out of the standard. In lack of proper instruction I didn't dare to try to set them but now I gonna to check and set them!
I'm really glad this may have helped. Please consider a super thanks if this helped you out.
Great job gd info thx
Very helpful.
Stiff suspension is not from racing or "launching". I drag my gen 3 busa, you want the suspension soft to soak up the initial shock of full throttle. It was probably set hard because the rider was an absolute unit and he needed the bike to not buck him off at speed from a pothole because he was getting too much travel and not enough damping
Great video thank you I just purchased a 2022 Hayabusa and I have a question sounds crazy but how can I increase the height of my Hayabusa maybe go with 200/60/17 tires etc. thanks
Probably wanna take back to the dealer and ask them on a new bike. The hayabusa are designed to be low on purpose. They are probably the lowest bikes i have ever ridden. By making them taller you are changing the geometry of the bike. Lots of hayabusa forums on the internet i just cant help yah on this one. Do research and go from there. Also this video will not work on your suspension as suzuki has changed all the suspensions from this model specific.
My bike was already stretched when I got it.
I imagine it’s lowered as well.
Never had a problem with how it rides.
only big bike I’ve ever owned.
I don’t know what that feel means🤔
I’m very confident on this bike.
Hopefully it’s adjusted fine.
STIFF/SOFT...🤷🏽♂️
Wouldn’t even know what to tell my mechanic.😕
Is this setting for my 2006 hayabusa gen 1 as well ?
Hello.
In the service manual they say that the std position for the pre-load adjustment is in 5th groove. The rebound std 3 clicks out from the stiffest postion.
I'm in Europe, so I don't know if there is a diff between our regions. (I think there isn't).
I have an Hayabusa from 2002 and I'm trying to reverse the previous owners suspensions setting to the standard. That's why I found your video.
Could you please confirm where did you find your info about the factory settings?
Thanks a lot.
Regards.
Usa manual, follow video and go from there
ok my suspension is ok but I had put my swim arm by someone in Fontana,California and well when I sit my girl the suspicion fail...the rear touch the tire leaving some marks on the fat tire...so I don't know if I just adjust the shock or there are some other ways to do it....I think they remove all this factures screw that your moving to adjust it
Mine has the fender eliminated.
like that when got it.
Hate how they did it, devalues bike.
But nothing rubs & looks better than stock.
Imo
And I’m not sell’in her...
Awesome video so did u buy a Busa yet??? I got a Turbo Busa I love it!!!
Nope bought 2 more aprilias so i can continue working on bikes.
Helo sir ..my 2017 busa top rebound screw is clicking only 6 n half times anti-clockwise after six an half clicks clockwise...
Your 2017 busa i think has different forks than this gen one. Follow the manual on settings them.
@@TorrentPerformance sir as per owner manual book front rebound screw wich should clicks 8 times anti-clockwise for factory settings..... is clicking only six times anti-clockwise ...
@@ngvlogs5555 If that is the case than something internally is wrong. Why are you trying to adjust it do you feel something is wrong. Email me so i can try to help you further. Email in description below.
@@TorrentPerformance i have sent u mail please check
I have a Gen 2 2016 ABS model are the settings the same
Cheers
No there different forks
@@TorrentPerformance I don't suppose you have the specs fir my bike
@@jackthomson5618 nope afraid not gonna need to contact dealer or get a repair manual. The actual owners manual will have the correct settings in it
@@TorrentPerformance okay, thanks for your time cheers
lol i literally bought one 5 days later
You need a socket set
Hey where are you located
Pulled my address and phone number off all my stuff so I don't get robbed. Also I don't use facebook anymore to help protect my location. I am located in Illinois.
TorrentPerformance oh ok I understand! I’m going threw a lot with my very first atv and needed help I wish I was close to you I would have liked for your help
Helo sir ..my 2017 busa top rebound screw is clicking only 6 n half times anti-clockwise after six an half clicks clockwise...
Gen1s have issues with 2nd gear needs to be uncut
not all...some dont know how to shift which will cause forks to bend and dogs to round off
misinformed mate, zero to 100 in 2.4 sec