Rear Tire Removal - Balance - Rotor and Brake Pad Install Harley Davidson

Sdílet
Vložit
  • čas přidán 17. 10. 2023
  • This is the 2ND Part of the Lyndall Brakes install. I covered the Rear Tire Removal, Balance, Rotor + Pad Install. I will be making a separate, more in-depth video for Proper Belt Deflection, and the Suspension!
    Fromt Tire Video 🤟🏽
    • Lyndall Rotors and Bra...
    Lyndall Rotors 👉🏽 bit.ly/Lyndall_Rotors
    Lyndall Brakes 👉🏽 bit.ly/Lyndall_Brake_Pads
    Share this video with a friend - • Lyndall Rotors and Bra...
    Also, Let’s Connect :
    Shop - www.raiderworldselect.com
    Facebook - / raiderworld72
    Instagram - / raiderworldinc
    Email - raiderworld1942@gmail.com
    Music by - Epidemic Sound www.epidemicsound.com
    As a disclaimer, I am not a Harley Davidson or Motorcycle Mechanic. I’m just someone, like most of you watching these videos, who likes to wrench in their own garage or shop. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you. Any Amazon Links you click below and complete a purchase, I receive a small commission. This helps me to buy more parts or tools needed to install and review on this channel.
    "As an Amazon Associate, I earn from qualifying purchases"
    TOOLS:
    BikeMaster Wheel Balancer and Truing Stand
    amzn.to/46blZKs
    Wheel Weights Motion Pro
    amzn.to/46WhraM
    Rear Wheel Alignment Tool Motion Pro
    amzn.to/3Q3Qbjt
    Belt Tension Gauge
    amzn.to/3M8vwKd
    36MM Socket
    amzn.to/48VFHLL
    Dial Indicator Gage Gauge
    amzn.to/3ru7Fxu
    Professional Digital Outside Micrometer
    amzn.to/3t9quqh
    Disc Brake Pad Installation Spreader Caliper Piston Spreader Tool
    amzn.to/3RAt1nf
    Disc Brake Quiet
    amzn.to/3FayYzV
    MityVac Brake Bleeding Tune-Up Kit
    amzn.to/3rBuGyE
    Fluid Tester Pen
    amzn.to/48NhWW3
    Brake Parts Cleaner
    amzn.to/48KV0a9
    Electronic Digital Caliper
    amzn.to/46IuvjZ
    Milwaukee Electric Ratchet w/ Variable Speed Trigger
    amzn.to/3PTuiDG
    TEKTON Deep Socket Set
    amzn.to/3oUKach
    Rhino Motorcycle Straps
    amzn.to/3gRI8Fi
    DEWALT Impact Socket Set
    amzn.to/41uiFXE
    TEKTON 91804 Quick-Release Swivel Head Ratchet Set
    amzn.to/2OHff3X
    TEKTON ¼ Drive Torque Wrench (20 - 200 in-lb)
    amzn.to/3t3y9kF
    TEKTON ½ Drive Torque Wrench (10 - 150 ft-lb)
    amzn.to/3wFgG4h
    GEARWRENCH 3/8" Drive Micrometer Torque Wrench 30-250 in/lbs
    amzn.to/3AHwhUt
    Wheeler Manual Firearms Accurizing Torque (F.A.T) Wrench
    amzn.to/3EzThXa
    Thread Restorer Kit
    amzn.to/3JQlYCZ
    GEARWRENCH Stubby Flex Head Ratcheting Combination Wrench Set
    amzn.to/3bFNrWP
    Stubby Impact Socket Set
    amzn.to/3IqTyOz
    Stubby Bit Set
    amzn.to/3Mf42Sb
    Milwaukee M4 Screwdriver Kit (Also makes life a little easier)
    amzn.to/2OHg1xT
    Powerbuilt Vinyl Protector Pad Mat (Protect your Parts)
    amzn.to/3t6R3qy
    Parts Blanket Protects Against Scratches
    amzn.to/3GAumEi
    OEMTOOLS Tool Cart
    amzn.to/3crvevi
    LEXIVON Master Hex Bit Socket Set
    amzn.to/3t2fCW0
    LEXIVON Torx bit Socket Set
    amzn.to/31XL7Vc
    GOPRO SET UP:
    Drone DJI Air 2-S Fly More Combo
    amzn.to/3i80LXd
    Simpson Helmet Mod Bandit
    amzn.to/3VvYmaL
    GoPro Chin Mount
    chinmounts.com/
    GoPro Hero 10 Black
    amzn.to/3S404h5
    GoPro Hero 8 Black
    amzn.to/3vsSXnA
    GoPro Hero 7 Black
    amzn.to/3IBAydH
    Gobe NDX 52mm Variable ND Lens Filter
    amzn.to/3KYBY3q
    ULANZI G9-5 Housing Case for Gopro Hero 10 9, Aluminum Video Cage (NEWER VERSION)
    amzn.to/3JqFK5e
    Rode SC3 3.5mm TRRS to TRS Cable Adaptor for smartLav Microphone amzn.to/3wkX9bY
    Rode SmartLav+ Omnidirectional Lavalier Microphone
    amzn.to/36sxR0r
    GoPro Pro 3.5mm Mic Adapter (Official GoPro Accessory)
    amzn.to/3ijchOz
    Camera Battery Storage Bag, Battery Holder Case for GoPro
    amzn.to/3MXCdgZ
    Sandisk 128GB Ultra Micro SDXC Memory Card
    amzn.to/3tefuTe
    GoPro Suction Cup (Official GoPro Accessory)
    amzn.to/30zXnun
    Neewer Camera Lens Filter Kit for GoPro
    amzn.to/38yZIdE
    SHOP LIGHTS, STANDS, HANDHELD, and AUDIO:
    Barrina LED Shop Lights (Makes any garage look like a showroom)
    amzn.to/2PCRSJl
    Neewer 2 Piece LED Video Light and Stand (Great for that extra needed light)
    amzn.to/2PAuFaJ
    Neewer Camera Tripod Monopod with Rotatable Center
    amzn.to/2O5CFjB
    Neewer Tripod Pro
    amzn.to/41BgSjX
    KOBRA-TECH Phone Holder
    amzn.to/41ydRks
    SoHo Urban Artist Tripod Weight Bag
    amzn.to/38b42zn
    Aputure Amaran AL-MX LED Video Light (Great light for on-the-go)
    amzn.to/3riWke1
    Tascam DR-10L Digital Recorder Kit (Easy to operate and clear sound)
    amzn.to/2Pw81A9
    Apple Lightning to 3.5mm Headphone Jack Adapter
    amzn.to/3qmDDEZ
    #harleydavidson #rotors #brakes
  • Jak na to + styl

Komentáře • 36

  • @ncautolink
    @ncautolink Před 2 měsíci

    Once again! What a great video! Just installed new Metzler CruizeTec tires and rear brakes. Got rage wheel Allignment tool and the rear axle nut tool. Made it so easy! Thank you Sir!

    • @RAIDERWORLD
      @RAIDERWORLD  Před 2 měsíci

      Thank You for the Support! The right tools always help

  • @ncautolink
    @ncautolink Před měsícem

    Just balanced my wheel flowing your video! Bought balance stand from Harbor Freight. The balance came out spot on perfect The motorcycle shop balanced the same wheel twice and couldn’t get it correct!
    , thanks

    • @RAIDERWORLD
      @RAIDERWORLD  Před měsícem

      That’s great to hear! Definitely an easy project

  • @ericdesrochers9464
    @ericdesrochers9464 Před 7 měsíci +1

    Great video as always 🤘

    • @RAIDERWORLD
      @RAIDERWORLD  Před 7 měsíci +1

      Thank You! I definitely appreciate it 🤟🏽

  • @Jim_Berry
    @Jim_Berry Před 7 měsíci +1

    I like your style and really enjoy your videos. I always use gloves with anti seize, cause it tends to get everywhere and it’s hard to get off.

    • @RAIDERWORLD
      @RAIDERWORLD  Před 7 měsíci

      Thank You! I appreciate the support. Yes, wearing glove’s absolutely helps. It’s easier to wipe off the glove than it is your hand. For some reason, I just didn’t wear any this time.

  • @alred6568
    @alred6568 Před 29 dny +1

    Very well done video. However, I can give a little word of caution for well used rotors and bolts. Due to the extreme heat those bolts are exposed to during operation, heat,and penetrating fluid can help to remove the weak t45 design of that particular bolt. Lastly, close attention should be focus in keeping the t45 and ratchet in a STRAIGHT 90 degree angle. I have seen many high end t45 bolts and bits damage due to proper use or lack of proper preparation. Great information has been publish on this particular subject.

    • @RAIDERWORLD
      @RAIDERWORLD  Před 27 dny

      Absolutely, thank you for the input 👍🏽

  • @kellybgliding
    @kellybgliding Před 7 měsíci +1

    Love the rotors!! It just put a different flavor on the bike

    • @RAIDERWORLD
      @RAIDERWORLD  Před 7 měsíci

      They definitely do make a world of difference. Not only in looks, but serious stopping power

  • @ncautolink
    @ncautolink Před 3 měsíci

    Your videos are the best! Very well explained and detailed! Thank you! Just ordered the rear axle locking tool and Alignment tool! I never knew it existed before I saw your video. Always struggled with getting the rear axle and wheel straight.

    • @RAIDERWORLD
      @RAIDERWORLD  Před 3 měsíci

      Thank You! I definitely appreciate the support

  • @BrewCityRider
    @BrewCityRider Před 7 měsíci

    Slick vid, nice job. I see you like to have the proper tools for the job like me😅. That Jim's tool was cool.

    • @RAIDERWORLD
      @RAIDERWORLD  Před 7 měsíci

      Thank You! Yes, the right tools make the job a lot easier.

  • @m.s.8312
    @m.s.8312 Před 7 měsíci

    Great video, learned a lot.

    • @RAIDERWORLD
      @RAIDERWORLD  Před 7 měsíci

      Thank You! I’m glad it was helpful

  • @danbarrette9888
    @danbarrette9888 Před 7 měsíci +2

    What are your thoughts on the liquid tire balancer. You make working on your bike look so easy.

    • @RAIDERWORLD
      @RAIDERWORLD  Před 7 měsíci

      I’ve never tried the liquid balancer. I don’t know how that would hold up over time, and if different temperatures would have any effect. I’m currently testing out the bead Balance of the front tire. I like to visually see the weights, and if one falls off I can always add another

  • @sergiogarcia3476
    @sergiogarcia3476 Před 2 měsíci +1

    Thank you for the details on all your videos, question? When you do the final torque 140ftlb that’s when bike weight on the floor ?

    • @RAIDERWORLD
      @RAIDERWORLD  Před 2 měsíci

      Thank You for the support and watching! It doesn’t really matter. As long as your wheel is locked and not in neutral or spinning, it should be fine.

  • @GK-bh1tp
    @GK-bh1tp Před 6 měsíci +1

    Love those rotors! Question though, can I change just the front? I feel like thats alot of work for something that's hidden by my saddlebags anyway. But, performance wise.....will changing just the front be a problem?

    • @RAIDERWORLD
      @RAIDERWORLD  Před 6 měsíci

      There’s nothing wrong with just changing out the front. You will still be adding additional stopping power.

  • @sergiogarcia3476
    @sergiogarcia3476 Před 2 měsíci

    I appreciate your videos , I did change my rear tire successfully thanks to your videos, by the chance do you know why is belt deflection for a 2017 road glide special? I lost my service manual😞 I notice you have same bike

    • @sergiogarcia3476
      @sergiogarcia3476 Před 2 měsíci

      I already bought the motion pro gauge just need to know how tight needs to be , thank you for your help!

    • @RAIDERWORLD
      @RAIDERWORLD  Před 2 měsíci

      I’m glad this video was helpful. It should show it on the Harley Website or the forums. It should be the same for 2015-2021 models, but not 100%. You can always purchase a digital service manual online for around $25

    • @sergiogarcia3476
      @sergiogarcia3476 Před 2 měsíci

      @@RAIDERWORLD thank you!!! I really appreciate your help!!👍

  • @2147crew
    @2147crew Před 7 měsíci

    Your bike is bad A! The brakes are one of a kind.

    • @RAIDERWORLD
      @RAIDERWORLD  Před 7 měsíci

      Thank You Brother! I’m definitely looking forward to the rest

  • @TomMartini-su4vx
    @TomMartini-su4vx Před 2 měsíci +2

    Good video, but where is the tire removal?

    • @RAIDERWORLD
      @RAIDERWORLD  Před 2 měsíci

      Thank You! Should be somewhere in this video lol

    • @TomMartini-su4vx
      @TomMartini-su4vx Před 2 měsíci +1

      @@RAIDERWORLD​​⁠​⁠it seems that we may use different terminology. What you refer to as rear tire removal, I would call rear wheel removal. As a guy who has already removed my rear wheel from my bike, I was hoping to see your tire come off your wheel! Nevertheless, your procedure is meticulous and your aftermarket parts selection is primo👌.

    • @RAIDERWORLD
      @RAIDERWORLD  Před 2 měsíci +1

      Oh ok, I got you now. Unfortunately I do not have any videos (yet) covering tire removal. I will in the future 🤘🏽

  • @Avankaurparmar
    @Avankaurparmar Před 7 měsíci +1

    What you think are better performing these brakes or the galfer??

    • @RAIDERWORLD
      @RAIDERWORLD  Před 7 měsíci

      I’ve never ridden with Galfer Rotors before, so I can’t really say which one is better. I would say that the Lyndalls Coiled ring retaining system vs the Galfer button style is far superior. I have heard those rattle over time