New top speed, first 5th gear wheelie

Sdílet
Vložit
  • čas přidán 7. 09. 2024
  • first 5th gear wheelie, new top speed of 75.5 with more in it. next goal 80 mph.

Komentáře • 58

  • @Just-InTimeRepairs
    @Just-InTimeRepairs Před rokem +4

    That's an awesome looking Trail 70 man. Great job.

  • @horizen5can117
    @horizen5can117 Před 2 lety +5

    getting that thing up with no clutch is wicked

  • @pm270100
    @pm270100 Před 3 lety +4

    sounds goooood

  • @felixklages1893
    @felixklages1893 Před rokem +1

    Sehr gute Arbeit, ich sehe du verstehst dein Handwerk! Grüße aus Deutschland von einen ambitionierten Schrauber!

  • @michaelbennett6550
    @michaelbennett6550 Před 2 lety

    Shifts that thing man! Good video for us to see👍

  • @weekendwarrior4271
    @weekendwarrior4271 Před 2 lety +4

    Too much talking. Love the build though.

  • @davelowets
    @davelowets Před rokem

    Just put a small fuel pump on it if it's constantly running out of fuel at high RPMs. A pulse pump off a small ATV, a barbed fitting in your intake, and a vacuum hose, is all that would be needed and the issue would be gone.

    • @bolanbuilt5903
      @bolanbuilt5903  Před rokem +1

      The float was just set way to low out of the box. Been good to go since I raised the float level now

  • @pedronelcontreasorozco2412

    Very good video, thanks for that, I wanted to ask you about the engine, is that engine good for daily use or is it an engine that requires frequent maintenance? How often do they maintain it, I want to adapt it to my motorcycle that I use daily but I would like to know about maintenance

  • @WorivpuqloDMogh
    @WorivpuqloDMogh Před 3 lety +1

    This is why i converted my engine to carb. It came with euro 4 injection. It was a mess. It ran too rich and had no power and hiccuped like crazy.
    Now it has plenty (legally its a moped so 45 kph is only allowed but it goes 80 now.) The only issue i have is it bogs and stalls, when i open the gas wide from stationary.

  • @ifrit35
    @ifrit35 Před 2 lety +1

    braaap! Original comment, I know. I love these things.

  • @mikehildreth2842
    @mikehildreth2842 Před 3 lety +4

    I'm a first-time watcher and am unfamiliar with exactly WHAT bike you have. It looks like a Honda Trail 70, but has obviously been modified.
    Is that a Trail 70? Is it bored out to a larger cc size? What is the cc size? Is it a completely different engine (ie: Lifan SSR125, Pitster, etc)? How'd you get a 5th gear in it?
    I'd like to know a lot more about the mods you've made.
    Awesome bike and riding too!

    • @bolanbuilt5903
      @bolanbuilt5903  Před 3 lety +9

      Yes it's a 1970 trail 70, currently I have a zs 190cc swap in it with a 212cc big bore kit. 5 speed trans. Fmf pipe. 34mm carb.

  • @grumman38
    @grumman38 Před rokem +1

    At WOT you will be “on” your main jet.

  • @joeeorio4606
    @joeeorio4606 Před 3 lety +2

    if you ever get a gauge on it would love to know RPM @65 also awesome wheelie

    • @bolanbuilt5903
      @bolanbuilt5903  Před 3 lety +1

      I'm working on figuring out a good gauge cluster soon. like a vapor or something would be neat to have on the bike

  • @ieame-ch
    @ieame-ch Před 2 lety

    It's a great bike.How many teeth are there in the front and back gears?I want to refer to it.

  • @darch4183
    @darch4183 Před rokem

    Can you add a steering damper? All I could imagine is you dropping down from the wheelie in to a tank slapper

    • @bolanbuilt5903
      @bolanbuilt5903  Před rokem

      I've thought about it but she comes down pretty smooth most of the time.

  • @pitbikesha9864
    @pitbikesha9864 Před rokem

    My 170 does the exact same thing at high rpm it cuts out then after like 10 seconds it starts like brand new

  • @burlymugg
    @burlymugg Před 3 lety +2

    is there a reason you don't usually kick start the bike? i've heard varying opinions about it can damage these motors. Curious your thoughts.

    • @bolanbuilt5903
      @bolanbuilt5903  Před 3 lety +1

      I usually only use the electric start when I first start it up for the day because I have it near by. After that anytime I turn it off I kick start it. Just a bit easier to get it fired up on a cold start. But if I don’t use the electric start on a cold start it usually fires up in 2-3 kicks.

  • @warrenpeas
    @warrenpeas Před 7 měsíci

    i left mine out too before.

  • @kenichishirahamagremory6166

    hello, how much autonomy do you have with the original dax tank?

  • @koollee
    @koollee Před 2 lety

    Dam that thing is fast. Is it a Zonshen 190cc 4 valve??

  • @juliant9150
    @juliant9150 Před rokem

    wich light do you have looks sick

  • @bastianbie3614
    @bastianbie3614 Před 2 lety

    where did u buy the fuel cap? and does it fit on the original dax

  • @brendenlorkowski1060
    @brendenlorkowski1060 Před 10 měsíci

    What engine

  • @romualdmatou4988
    @romualdmatou4988 Před 2 lety

    Hi dude!!
    Where're U get Urs parts for the engine please? Could U explain me the cap speed oil function please N where're u get it?! Thx. S/O from French West Indies 🤙🏿

    • @bolanbuilt5903
      @bolanbuilt5903  Před 2 lety +1

      I got the catch can from kepspeed. Engine I got from wholesale cycle. It's all stock other than carb swap and fmf exhaust

  • @markbell8680
    @markbell8680 Před 2 lety

    What size engine and what brand name carburetor and size mm

    • @bolanbuilt5903
      @bolanbuilt5903  Před 2 lety

      212cc engine, carb is whatever came with the engine, forget what brand, but 28mm

  • @219Tucker
    @219Tucker Před 3 lety +1

    what exhaust is that?

    • @bolanbuilt5903
      @bolanbuilt5903  Před 3 lety +1

      its a FMF factory 4.1 for a crf50. sadly they no longer make this pipe.

  • @ByKevoo
    @ByKevoo Před rokem

    What forks are they and have you got a link

    • @bolanbuilt5903
      @bolanbuilt5903  Před rokem

      They are bullock forks. bullockperformance.myshopify.com

  • @bikesandbalding
    @bikesandbalding Před 2 lety

    It's been a while but what gear ratio are your running?

  • @gregorybachant3584
    @gregorybachant3584 Před 2 lety

    Needle doesn't affect WOT.

    • @bolanbuilt5903
      @bolanbuilt5903  Před 2 lety

      Good to know! I'm pretty new to this carb stuff still. Frustrating to say the least lol. Busted out the wideband tho and got it pretty good that way.

  • @Mr10usdad
    @Mr10usdad Před 2 lety

    Do you have 10 or 12 inch wheels?

  • @elicytrynbaum2969
    @elicytrynbaum2969 Před 2 lety

    How far does it go on a full tank?

    • @bolanbuilt5903
      @bolanbuilt5903  Před 2 lety

      I don't run it empty I fill up often so I'm not for sure. But the way I ruger probably 20 miles haha

  • @GeraldMcClellan-tw8we
    @GeraldMcClellan-tw8we Před rokem +1

    What gear ratios are you running?

  • @richardcattafi1327
    @richardcattafi1327 Před rokem

    go to a bigger jet !!!!!!!!!!!

  • @Pigmaster6373
    @Pigmaster6373 Před 3 lety

    You don't even build up any revs with your clutch when you wheelie. How do you pull up so easily?

    • @bolanbuilt5903
      @bolanbuilt5903  Před 3 lety

      just hammer the throttle and pull up! short wheelbase so the weight shift makes it pretty effortless.

  • @skrodearzi9378
    @skrodearzi9378 Před 3 lety

    0-60?

  • @Ghost88890REAL
    @Ghost88890REAL Před rokem

    Where did you get the motor? My motor sprays oil like a mf.

  • @countrycanadian44
    @countrycanadian44 Před 2 lety

    Funny u can get almost 65mph with proper gearing with a stock 125cc lifan with my z50 I thing 190cc is big waste of money not huge diffrence in top speed in my eyes

    • @bolanbuilt5903
      @bolanbuilt5903  Před 2 lety +4

      I've been 80+ on mine with the 212. It's not all about top speed, it's how fast it gets there and the torque. Try to pull that 125 up for a wheelie at 65mph.

    • @davelowets
      @davelowets Před rokem +3

      "Almost 65" and well over 70 are 2 VERY different things.... If it's a "waste of money" to you, then you don't make enough money.