Barn Find Adventure - Antique TV - Will It Work?

Sdílet
Vložit
  • čas přidán 26. 08. 2024
  • Will this old TV come to life? Join me in this adventure to put a picture on it's screen again!
    To learn electronics in a very different and effective way, and gain access to Mr Carlson's personal designs and inventions, visit the Mr Carlson's Lab Patreon page here: / mrcarlsonslab
    #restoration #electronics #repair

Komentáře • 489

  • @MrCarlsonsLab
    @MrCarlsonsLab  Před 7 měsíci +29

    To learn electronics in a very different and effective way, and gain access to Mr Carlson's personal designs and inventions, visit the Mr Carlson's Lab Patreon page here: www.patreon.com/MrCarlsonsLab

    • @killerdeamonking
      @killerdeamonking Před 7 měsíci

      Hello Mr.Carlson , i have a rather odd question for you. I have been working on a classic car for a few years now and am in a little pickle here, I want to convert my incandescent Dash lights over to LED but all the LED bulb designs are subpar in terms on how they throw the light out into the cluster area.
      The way my cluster is setup it seems to be a reflector type setup where the cluster faces are solid and the light you see is shined through a gap between the glass and the dial face.
      I have been thinking about getting a set of 5mm LED's to make my own Bulbs ( I have not checked the Incandescent bulb sizes yet in MM as there are 2 different size bulbs ) , im wondering how one would drive 8 Bulbs from a circuit board with wires to each bulb. Now my main question is , do you think its possible to control the led's brightness based on the original Dimmer switch on the car as i don't want to start modifying any of the original wiring. The dimmer switch would be done by variable Voltage controlling.
      I haven't decided if its easier to use 5mm bulbs or using the little rectangle leds , Reason being is i am almost tempted to try changing which bulbs illuminate should i do a 3 color setup where i can push a button or switch a selector switch under the dash to go from something like Green , Warm white and white as the colors.
      Is there away to do a variable resistor type setup on a circuit board to achieve brightness controlling based on the rheostat input voltage to the board?
      I don't like the idea that normal socket type leds burn out because they are over bright due to incorrect internal resistors. I would rather have a traditional LED that dims naturally as it goes away but also dim able by me but replaceable just as easily. Thanks , ZD

    • @only257
      @only257 Před 6 měsíci

      Agreed 📺😊

  • @MrPatdeeee
    @MrPatdeeee Před 7 měsíci +218

    Dear Carlson you have caused tears of nostalgia in me now. IE: I was a TV technician for 45 yrs. 33 with RCA Service Co. And I was an instructor at RCA's colleges; for a long time. Thus, what you did is what I have done untold times. Wow! Thank you kind Sir for doing this.

    • @danieldoss1987
      @danieldoss1987 Před 7 měsíci +4

      I just want to personally thank you sir for fixing the horizonal hold on the televisions of my childhood. Always seemed like the horizontal hold was the first to go.

    • @MrPatdeeee
      @MrPatdeeee Před 7 měsíci +4

      @@danieldoss1987 Dear person, did you not mean your reply to be for Carlson?

    • @bradbeasley7669
      @bradbeasley7669 Před 7 měsíci +4

      cool beans good sir spent many a moon in a mom and pop tv repair shop my self

    • @danieldoss1987
      @danieldoss1987 Před 7 měsíci +5

      @@MrPatdeeee Nope! I was talking to you brother. Back in the day, good TV repairmen walked on water!

    • @MrPatdeeee
      @MrPatdeeee Před 7 měsíci +2

      @@danieldoss1987 Thank you.

  • @russellross4045
    @russellross4045 Před 7 měsíci +13

    OUTSTANDING ENDING!!! BTW, I couldn't find your channel on ch 3. Ha, ha, ha. My grandpa was a T.V. repairman who fixed T.V.'s for little old ladies from my grandma's church. Never asked a dime from them but he got fat on all the cakes and cookies given him by these sweet ladies. I got started by going down to the basement, where he had his workshop, and we would listen to his old Midland shortwave set, with all the lights turned off. Hours listening to the BBC and VOA transmissions of world news. Civil wars in Africa, Cuban missel crisis. All this from a groundwave antenna, wrapped around the foundation of the house. Went into the Marine Corps and became a radio technician. PRC-25/77's, Prc-41's, Prc-47, Mrc-83/87's, Mrc-110's, Mrc-135's, and my favorite Trc-75's/TSC-15's. Stayed 20 yrs and retired just before Grenada. Then I got into Cb's. After that, IBM pc's. Ah the computer age. Started building my own. Still do. Using a workstation HP-400 for gaming. It's what I'm typing on right now. Starting up in SDR's.
    I love your video's and will be becoming a Patreon soon.
    Semper Fidelis, Sensei.

  • @roncaruso931
    @roncaruso931 Před 7 měsíci +35

    Mr. CarlsonsLab is better than the junk on TV these days. You look good in analog electronics.

  • @McTroyd
    @McTroyd Před 7 měsíci +38

    That was awesome using the TV itself for the outro. Probably the first video it's played in a long time. One of these days, maybe for April Fools Day, consider building a "time machine" and show us how you get these nice pieces. 😆👍

    • @senilyDeluxe
      @senilyDeluxe Před 7 měsíci +1

      Ask Techmoan if he lets you borrow his :-)

    • @McTroyd
      @McTroyd Před 7 měsíci +1

      A neat idea, but I'm sure Mr. Carlson's will be better-engineered. @@senilyDeluxe

    • @theplateisbad1332
      @theplateisbad1332 Před 7 měsíci +1

      An episode from the past, in black and white and contemporary clothing would be cool.

    • @McTroyd
      @McTroyd Před 7 měsíci

      That would be kind of cool. Maybe Mr. C has an old video camera in his collection.@@theplateisbad1332

  • @loumontcalm3500
    @loumontcalm3500 Před 7 měsíci +14

    "We control the vertical, we control the horizontal"
    I watched that show on a set like this.

  • @ChrisdeHaan
    @ChrisdeHaan Před 7 měsíci +31

    This brings back memories of growing up with my dad working at a TV and appliance repair shop. First place I learned electronics and started my love and fascination with technology, radio and electronics.

    • @MadScientist267
      @MadScientist267 Před 7 měsíci +2

      Yep my uncle repaired them, used to give me dead tuners to play with. Same outcome.. I'm heavy into electronics today...
      And there's something purely magical about tubes and particularly the CRT. I have a few samples around I intend to do something with someday but... 🤣🤷‍♂️

  • @panthony1525
    @panthony1525 Před 7 měsíci +13

    All Mr. Carlson would have to do is smile at the TV and it would spring into life. Nice to see a TV on the bench tho.

  • @RaggedyAtom
    @RaggedyAtom Před 3 měsíci +2

    The fact you were able to broadcast your outro on that thing is insane! The video quality and sound is actually pretty good despite the TV being old as time itself.

  • @PatrickSilvestri-cg7bq
    @PatrickSilvestri-cg7bq Před 7 měsíci +16

    Has a TV technician for 45 years. I still love repairing the old sets because you can still get tubes for them. This was a very great video and brought back a lot of memories from when I was a kid and when I had my shop once in a while, I’ll find a TV like this in a thrift store. They’re only five to $10 but I have to have them it’s the nostalgia and yet once in a while someone will see the TV in my shop And they want to buy it just for the nostalgia because their grandmother had one. Great work, Mr. Carlson. Thanks for the memories. sitting on shelf and want to buy it just because their grandmother had one so they’re still sellable but you have to be patient.

  • @tonyking9235
    @tonyking9235 Před 7 měsíci +5

    MR C YOU JUST TOOK ME BACK TO WHEN I WAS AS POOR AS A CHURCH MICE . AND I HAD ONE TV FOR SOUND AND ANOTHER ONE FOR THE PICTURE. 😂😂 MOST PEOPLE TO DAY DONT KNOW HOW TO CHANG A , LIGHT BULB 😂😂😂😂BUT I THANK THE GOOD LORD FOR SOMEONE LIKE YOU MR C .

  • @ianprestleton2081
    @ianprestleton2081 Před 6 měsíci +4

    Hello I'm Ian from Birmingham in the United Kingdom i trained to be a television engineer back in the late 1970's / early 1980's after leaving school and prior going on to do other things. I am now retired and i restore vintage televisions as a hobby and i just wanted to say its great to see that you have a television set on your workbench at long last and i hope to see more television restorations very soon thank you please keep up the good work, Ian.

  • @buttguy
    @buttguy Před 7 měsíci +9

    The amount of Zenith and RCA TVs from this era that still simply just work (even if the picture tube is on its last leg) is a testament to the quality of these brands from this era. Amazing that some of these sets are now over 70 years old and still doing their job.

  • @challenger2ultralightadventure
    @challenger2ultralightadventure Před 7 měsíci +8

    I can imagine that TV in a hotel room on some remote highway, along with the "magic fingers vibrating bed", shag carpet and big glass ashtrays on the cheap night stand. Cheers from Winnipeg.

  • @Fredy5100
    @Fredy5100 Před 7 měsíci +12

    So good to finally see a TV on the workbench... thank you Mr. Carlson. :)

  • @brucejenner5856
    @brucejenner5856 Před 7 měsíci +33

    A very interesting departure from the normal, but always absorbing repairs from Mr Carlson. Best part was the farewell message displayed on the vintage TV! Great touch!

    • @user-qj5cu2xj8t
      @user-qj5cu2xj8t Před 7 měsíci

      Would have liked to see what DTV signals he could pick up on that TV (through a converter box) using the 3-6-9 antenna.

  • @kendom33
    @kendom33 Před 2 měsíci +1

    Great ending too. Many thanks

  • @ltsiver
    @ltsiver Před 7 měsíci +10

    Wherein Mr. Carlson steps into Shango066 territory....

    • @ntsecrets
      @ntsecrets Před 7 měsíci +2

      a vintage tv resurrection released at 10:30 ET on a Saturday... yeah lol

    • @maskddingo1779
      @maskddingo1779 Před 7 měsíci +3

      Gotta klinkotwerbulate things.

    • @chrisreynolds6331
      @chrisreynolds6331 Před 7 měsíci +3

      Direct from flavour county. The nicotine haze. Nothing but the best! 😂

    • @Internutt2023
      @Internutt2023 Před 7 měsíci +3

      Shango has done some EPIC resurrections, using the approach of minimizing the amount of work, especially in the "mouse house" and "Hoffman homeless pi**ing post" TV's. This was just a "show & tell" video in comparison. Jordan Pier has done some good complicated older and later model TV repairs as well, and he does it for a income, so he has to be proficient at it.

    • @ltsiver
      @ltsiver Před 7 měsíci +1

      @@B__Mer it's BAKED! BAKED!

  • @kahlid-ataya
    @kahlid-ataya Před 7 měsíci +7

    at last my dream is coming true a TV @ Mr carlson lab.

  • @lelandclayton5462
    @lelandclayton5462 Před 7 měsíci +4

    I had one of those back in the late 90's when I was a teenager. Bought it for 15 bucks at a garage sale. Funny thing was I had a PlayStation hooked up to it and played Resident Evil 2 on it. Made the game so much scarier.

  • @robinbrowne5419
    @robinbrowne5419 Před 7 měsíci +1

    It looks like the TV we had back in the 60s. My sister and I used to watch Hercules cartoons on Sunday morning when my Dad wanted to sleep in. So we had to keep it quiet and sit really close. But then my mother would say "Don't sit so close, you will ruin your eyes." And we used to look in the grill in the back and see the orange glowing tubes. Ahh.. the good old days. Cheers :-)

  • @gwesco
    @gwesco Před 7 měsíci +3

    When I was in High School back in the 60's, my neighbor had a TV repair shop in his garage. I used to hang out there and help him out. He often used the brute force method of just swapping parts. I once showed him with an oscilloscope that the expensive flyback transformer was not bad. It was just the horizontal oscillator not running. Eventually went on to a career in telecom and spent nearly 30 years working on Nortel PBX's.

    • @davidbrittenham4631
      @davidbrittenham4631 Před 6 měsíci

      Ah, yes, Nortel, of Northern Telecom fame. I worked for many years installing, programming and maintaining Northern's SL-1 and it's later versions, then the Meridian and Option series. I loved that job. I could still program one today from memory if you sat the TTY terminal in front of me. I retired from the phone company in 1992 and was shocked when I learned Northern Telecom was no more. Good old days. And, I too, started out as a TV and radio repairman right out of high school, class of '72, with absolutely no training at all, just the knowledge of electronics I had learned as a ham radio operator, starting at age 12. I bluffed my way for a couple of weeks until I got the TV circuits figured out, then went on to own my repair shop for a while before deciding the telephone company was where I wanted to make my career.

    • @gwesco
      @gwesco Před 6 měsíci

      Ah yes, the KSR-43 tty that came with the early Nortel PBX's. I eventually connected ours up to a serial port on my 286 computer. No more pin feed paper and I could just capture the error and maintenance messages to disk. We started with an SL-1N and I upgraded it many times to an 81C and was going to upgrade to Succesion but left the company after 32 years before I had the chance. Ended up teaching Linux, Windows Server and VoIP at the local community college for 12 years before I finally retired.

  • @W4GHW
    @W4GHW Před 7 měsíci +12

    I love the ending!!! Back in the day, I actually worked on one of those. Man, you brought back some memories. Thanks!!!

  • @mortjoer
    @mortjoer Před 7 měsíci +5

    I appreciate you putting the outro on that old telly ^^

  • @simonilett998
    @simonilett998 Před 7 měsíci +2

    I certainly don't miss that horrific high frequency EHT squeal from old CRT's😁👍

    • @jessemontano762
      @jessemontano762 Před 3 měsíci

      EHT??

    • @simonilett998
      @simonilett998 Před 3 měsíci

      @@jessemontano762 Extra high tension.
      The awful high pitch squeal that used to be normal for old CRT TV's when operating.

  • @rodleger7132
    @rodleger7132 Před 6 měsíci

    This brings back memories of my dad's electronic business. He and his Tech's used a mirror on a stand to align the CRT images. The mirror would reflect the image. This way they could see the screen without having to switch between front and back of The TV.

  • @buriedbits6027
    @buriedbits6027 Před 5 měsíci +1

    I really like the attention to tube technology.

  • @rohnkd4hct260
    @rohnkd4hct260 Před 5 měsíci +1

    Those old sets were tuff! They were made to work and to last. Worked on many a set. LOL can't remember the last time i heard the word "raster."

  • @user-tj8zm6dg4y
    @user-tj8zm6dg4y Před 7 měsíci +2

    Smell-a-vision 😂

  • @MrBonez208
    @MrBonez208 Před 7 měsíci +7

    The yoke has / had rubber wedges along with the clamp to hold it in place on the neck of the tube. A lot of the time, the top wedge disintegrates and the top of the yoke falls forward against the tube, deforming the top of the picture. Usually in a color set this would cause purity issues. Color tv would use a solid color usually green, then check red and blue for no dark spots. A B/W would just be the single adjustment and a solid raster without dark spots. To adjust Purity, is the main adjustment for yoke alignment on the neck. The distance from it to the back of the CRT. The centering rings are just that. To center the picture. The vertical and horizontal controls on the back of the set are for the overall picture and not the center. A wedge on the top of the yoke and a little finesse of the clamp would help the focus and linearity of the top half of the picture. Color sets and static focus or dynamic convergence. Big screens with three individual CRT’s having to overlap picture (converge) would have guys tweaking for hours. Convergence adjustment was analog, then became digital. It’s a lost art, to know which adjustments did what and what to move for correction.
    Very cool find and nice to see it still in an operational condition.

    • @patricknesbitt4003
      @patricknesbitt4003 Před 7 měsíci

      I always tried to avoid loosening the yoke clamp on really old or high mileage TVs. Had too many of the little tabs under the clamp go brittle and just snap off from the yoke.

  • @djsi38t
    @djsi38t Před 7 měsíci +1

    What a gem!...RCA was king...my dad bought the top of the line RCA floor model in 1985 with remote control!!! and that remote had about 40 buttons which was unheard of in the early eighties.Everyone was amazed by the new technology.That tv lasted 25 years before being retired..still working..

  • @Bata.andrei
    @Bata.andrei Před 7 měsíci +3

    I learned electronics by helping my grandpa fix old black and white (sometimes colour) tv sets. I was 10, maybe 12 years old... I am 42 now and never stopped learning and practicing electronics. Thanks for the memories!

  • @andrewprettyquick2070
    @andrewprettyquick2070 Před 7 měsíci +10

    Pretty much serviceable. 10:23 10:40 overscan is spot on it seems. 15:28 here we go. 17:25 there be volts in here!.

  • @ScoutCrafter
    @ScoutCrafter Před 6 měsíci +2

    What a great ending. 😃👍

  • @jassenjj
    @jassenjj Před 7 měsíci +3

    The isolation of the sound and the picture is great and the lack of paper capacitors in the set definitely make this an easy job - the set practically worked.

  • @boingaon
    @boingaon Před 7 měsíci +2

    YES ! Television! I have over 60 CRT televisions from every era, and am excited to start restoring them myself.

  • @RonaldoSantos-pw6yh
    @RonaldoSantos-pw6yh Před 7 měsíci +7

    Nice to Mr. Carlson workin on TVs! As Shango066 would say, the smoker's choice, definitely, haha!
    Keep up the nice work!

    • @bonemar66
      @bonemar66 Před 7 měsíci +3

      Come to flavor country, with more nicotine glaze.

  • @danielromero640
    @danielromero640 Před 2 měsíci +1

    I really enjoy your videos. Thanks. Mr Carlson

  • @denisdespins1127
    @denisdespins1127 Před 7 měsíci +5

    Dude, you just got my FULL attention ! I've finally been PULLED away from the poly-Tics WAR...(for a while)
    TNX Paul...

  • @chrisa2735-h3z
    @chrisa2735-h3z Před 7 měsíci +1

    This TV is in beautiful cosmetic shape!! I wish that TV is now had this much personality in their design!! The electronics in this one aged surprisingly well too!😮

  • @markoszouganelis5755
    @markoszouganelis5755 Před 7 měsíci +1

    ...νοσταλγία="nostalghia", in Greek is "homesickness" but in the light romantic way! That is what I felt when I watched this video! I remember when 13 years old (back on 1970) I repaired our TV set from a broken cathode ray tube (screen), having very little knowledge in electronics by that time, but I finally did it! I remember first testing it (sound) by adding a homemade resistor, (lots of thin covered copper wire), in series with the filaments of the rest of the tubes (to substitute the load of the cathode ray tube by not having any idea what resistor I would use not even having one) and next step, ordering a new CRT, (from Athens, Greece), to replace it and I remember how happy this repair made me and not only to watch TV! So I loved electronics and become an electronic technician from then on! Thank you Mr. Carlson!🌈🕊😊♾

  • @ghohenzollern
    @ghohenzollern Před 7 měsíci

    When my parents bought our first computer, a Timex Sinclair, we only had one television, but my grandparents had an old black and white set they gave us to use with it. And this is the exact model and color of that set. I hadn't thought about it in years.

  • @robertsteven108
    @robertsteven108 Před 7 měsíci +3

    This is the first time I've seen you work on a TV... thanks for the change, it was very interesting. My favorite vids are your antique radio restorations. Thanks for sharing! All my best...Bob.

  • @darkwing4475
    @darkwing4475 Před 2 měsíci +1

    Thanks for this really great video,,, was kewl seeing this old set in front of a backdrop of about a zillion dollars worth of test gear,, :-)

  • @DrewskisBrews
    @DrewskisBrews Před 7 měsíci +10

    Nice! One little tip; Shango 066 has decent success avoiding the camera vs CRT rolling scan bar by shooting in low ambient light.
    EDIT: It appears that you came to the same conclusion later in the video.

    • @jamesstout3430
      @jamesstout3430 Před 7 měsíci +2

      The only thing missing is Shango's ham fisted methods of cranking every knob and control on the set. Lol

  • @peteb2
    @peteb2 Před 7 měsíci +5

    Oh the memories come flooding back! TV servicing for a while in my electronics career. Most times the TV was set upon it's own small footprint cart same as workbench height that it could easily be swung to face the Mirror Wall (which incidentally made the workshop appear a huge place). You could maneuver the Set close enough to test sources and reach to measure voltages. In my country when Colour came no sets had valves (tubes) so all that experience & knowledge just went out the door...

  • @davidportch8837
    @davidportch8837 Před 7 měsíci +2

    love the end Paul...

  • @carolriley9392
    @carolriley9392 Před 7 měsíci +1

    This is the first time I've seen the master work on a tv! Wow great honor!! 😊

  • @jampskan5690
    @jampskan5690 Před 7 měsíci +1

    "Let's see what's on TV." Lol, that had me.

  • @4nk8r
    @4nk8r Před 7 měsíci +3

    That was refreshing . 2024 off with a bang :)

  • @lopermachine
    @lopermachine Před 7 měsíci +2

    Patina TV. Also I would buy a “sketchy line cord” shirt. Very cool outro btw

  • @OBC-radio
    @OBC-radio Před 7 měsíci +1

    “This set is filthy” (proceeds to wipe screen with windex). Meanwhile in the Mojave Desert, Shango finds a TV set buried in the mud for 50 years at a mine-shaft dump site and says “let’s resurrect this!”. I guess it’s all relative, a pretty cool looking RCA. Nice find! 😎

  • @elmofeneken4364
    @elmofeneken4364 Před 7 měsíci +1

    Today's kind of a boring day. Just came in after shoveling snow and there's nothing good on TV, until I saw Mr. Carlson on TV in black and white. Enjoyed this one! Better than shoveling snow.

  • @ToobTime
    @ToobTime Před 6 měsíci

    I remember the TV shops had a mirror ready. The tech would place the mirror in front of the picture tube then make adjustments safely in the back while keeping an eye on the mirror. I also remember a rotary table, perhaps from a bar stool to easily rotate the set as needed.

  • @SeattlePioneer
    @SeattlePioneer Před měsícem

    I homebrewed my novice CW transmitter largely from parts that came from an old television chassis I bought for 50 cents at St Vincent De Paul. This was circa 1970.
    Of particular value were the power transformer, rectifier tube for the power supply and sweep tubes for the oscillator and amplifier.

  • @davelowets
    @davelowets Před 7 měsíci

    22:05 Ditto... 👍
    I remember as a young boy always peering intonthe slots of the case in any vacuum tube equipment, and being mesmerized by the glowing tubes in there that were passing and amplifying a signal through nothing but empty space.
    I had a basic understanding of how vacuum tubes worked back then, and I was amazed at how such a simple device could work as well they do.
    I still love vacuum tubes today. The circuits aroumd them are so simple. My favorite application for tubes is in audio equipment.
    Although tubes are not great at shoving mounds of current through low impedance loads, such as speakers, the ultimate circuit for a tube audio amplifier (to me) is an all tube front-end, followed by a beefy MOSFET final current stage.
    Bliss... 😉

  • @soundmankreek
    @soundmankreek Před 7 měsíci +1

    Yes! Yes! Yes! Finally, a TV! I simply CAN'T WAIT for you to go deeper into televisions! Very much looking forward to it!

  • @larrynelson3329
    @larrynelson3329 Před 6 měsíci

    Awesome style little TV. Bet it would clean up and shine like new.

  • @Jody-kt9ev
    @Jody-kt9ev Před 7 měsíci

    This set is a member of what RCA called its "Walkabout" portable TV family. It is from 1961(Sams 353-1). I have three of these from a TV shop that I cleaned out. I have mostly restored two of them. One of the restored ones has a weak CRT and wants to roll vertically until it warms up. The other has AGC issues with the strong DTV converter box signals. I also have another member of the "Walkabout" family. This was the deluxe member with a power transformer and a 6BQ5 audio output tube. The set in the video is series string and uses a 6AQ5 audio output tube.

  • @jimdavis6833
    @jimdavis6833 Před 7 měsíci +3

    That TV was probably sitting on a shelf above a bar at one time.

  • @kenhouser1753
    @kenhouser1753 Před 7 měsíci +1

    Thanks for sharing that with us!
    I started TV repair in January 1973 with the local RCA dealer/repair shop. The XL-100 had just arrived, but we did many tube sets of all brands.
    TV repair is pretty much gone now, but I still do industrial electronics, thanks to all the experience of television service.
    Thanks again!

  • @mattheweurich33
    @mattheweurich33 Před 7 měsíci

    I had a set just like this one, in my bedroom when I was growing up. However, the set in the video doesn't appear to have UHF tuner. Still brings back memories of my childhood!

  • @neiltheplayer
    @neiltheplayer Před 7 měsíci

    OMG we had one of those when i was a youngster - WOW!

  • @EriksElectronicsWorkbench
    @EriksElectronicsWorkbench Před 7 měsíci +1

    Paul, on your Sencore VG91 I noticed the LCD display backlight did not turn on when you hit the power switch. Did you know the backlight is adjustable? Take the top cover off and look at the backside of the front panel circuit board near the LCD. You will see a small recessed potentiometer. It varies the backlight intensity. When I first got my VG91 the backlight was turned off. I didn't know it had a backlight until I saw the adjustment on the schematic! It lights up a nice white color. -Erik

  • @jamied2108
    @jamied2108 Před 7 měsíci +1

    Nice start getting a raster on first power up. Thank you for sharing!!!

  • @jhoughjr1
    @jhoughjr1 Před 7 měsíci +1

    Pretty good picture

  • @KameraShy
    @KameraShy Před 7 měsíci

    Always an infomercial. Just can't get away from them.🤣

  • @Micotech1
    @Micotech1 Před 7 měsíci +1

    Hi Paul, I had the same TV 50 years ago it was all the same colour plastic.

  • @1959Berre
    @1959Berre Před 7 měsíci +1

    I don't blame you for calling the brown glaze on that set 'nicotine', since that is a common mistake. Nicotine is a white chemical. The sticky stuff on the set is tar, the main compound in tabaco smoke.

  • @TBizzell68
    @TBizzell68 Před 7 měsíci +1

    Really cool. I loved the outro

  • @StevePietras
    @StevePietras Před 7 měsíci +1

    All you need is a DTV set-top box converter to receive 8VSB and MeTV. Then you can watch classic shows on a vintage set!

  • @radiorexandy
    @radiorexandy Před 7 měsíci +1

    Nice video! Imagine, a 60-plus years' old television working "right out of the barn."

  • @michaeldeloatch7461
    @michaeldeloatch7461 Před 7 měsíci +1

    Make Analog Great Again! Mr Carlson's Network now broadcasting VHF Channel 3 from coast to coast, north pole to tierra del fuego! We all know Mr. C. could pull it off in about 15 mins of patching equipment there including his own invention, the 400 terawatt transmitter...

  • @peterburi2727
    @peterburi2727 Před 7 měsíci +1

    Nice, you are an amazing man. Thank you!

  • @mikepelletier1399
    @mikepelletier1399 Před 7 měsíci +2

    Soak that case in a solution of TSP from your local paint/hardware store, painters secret for removing cigarette tar

  • @rillloudmother
    @rillloudmother Před 7 měsíci +1

    the sound of your audio coming through the TV speaker reminds me of the sound of my grandma's kitchen TV circa 1977.

  • @Ricardo90
    @Ricardo90 Před 4 měsíci

    Televisor bem projetado! Sua bancada também. Parabéns!

  • @onemanshow4116
    @onemanshow4116 Před 7 měsíci +1

    FINALLY a repair I feel confident that I could duplicate!

  • @BearStar1
    @BearStar1 Před 7 měsíci

    I owned a Curtis Mathes 25 '' Color Console Cabinet TV that I bought brand new in May 1984 from Doyle & Ron's House of Curtis Mathes on N. Gray Street in Killeen , TX and it was still working up to May of 2023 when a Power Surge during a major Storm fried the power supply and the CRT ! 39 Years ! Curtis Mathes built the best TVs of all time !! Lightning hit a Power Sub Station and it created a Voltage Spike and Surge which fried my Computer, my Printer and the TV .

  • @cdnpont
    @cdnpont Před 7 měsíci +1

    I never thought I'd say it, rarely ever seen anymore, but there is still a charm to a low res BW image. Thanks for this.

  • @larrysmith9359
    @larrysmith9359 Před 6 měsíci +2

    Not bad at all for a CRT image. In 1973 I built a Heathkit color TV. I got some real experience in soldering. It was a lot of fun!😅

  • @shmehfleh3115
    @shmehfleh3115 Před 7 měsíci

    The before state of that TV reminds me of my youth, when every single public building, restaurant, bar, apartment, barber shop, hotel, motel, airplane, bathroom, whatever all smelled like years of striated cigarette smoke. I don't miss those days.

  • @wayner-model5880
    @wayner-model5880 Před 7 měsíci

    Excellent. Thing is probably 70 years old. 👍🏻👍🏻

  • @johnhillside9105
    @johnhillside9105 Před 7 měsíci +1

    😮boy..... I really liked this moment. I'm going into my Eighth Decade now as of the 3rd and Lo and Behold I see my RCA right there. This sat on a stand which would roll around. I see the window for the channel,... but I think differently about the knobs,... anyway. I watched the Apollo Moon Landing and I was talking this TV to Crooked Creek School for the Mercury Flights.
    Gee,...gee, gee..

  • @yambo59
    @yambo59 Před 7 měsíci +1

    Im 64 and grew up with CRT tube sets, this ones working amazingly well for its age, quick search shows two variants - the "new vista" (black and white) and "new vista color" both made from about 1962 to 1972. I had two newer Sharp 20" CRT color TV's that worked without repair for around 20 years before I finally turned them in still working great for scrap recycling. Had many other tube sets I remember since I was a kid, admiral, RCA wood console, Panasonic, as well as crt monitors & one like new 17" Dell CRT I hated to turn in cause I got it new in the box as new old stock and it worked perfect - but I got tired of hulking them around along with larger color CRT's that weighed a ton. So much easier to move a flat screen, but it seemed almost like I didnt want to get rid of them like some piece of my childhood history - lol

  • @michaelmoore7975
    @michaelmoore7975 Před 7 měsíci +1

    Ahhhh....a TV from back in the day the nearest kid was your remote/tuner. I remember those days well. My arms are still sore.

  • @mrt7152
    @mrt7152 Před 6 měsíci

    Neat looking little tv

  • @richardmiranda5357
    @richardmiranda5357 Před 7 měsíci +2

    It seems to be a mid 60's B&W television set. It's incredible that it works after being sitting for years but in order to have it in a permanent operating condition, it needs to be re-capped.

    • @hotpuppy1
      @hotpuppy1 Před 7 měsíci +1

      Late 60's I'd bet without checking the #'s. Filter caps replaced for sure.

    • @maxklingert6722
      @maxklingert6722 Před 7 měsíci

      I was hoping for a toasted resistor or a leaking cap at least. The vintage dust inside will have to suffice...

  • @RobertKohut
    @RobertKohut Před 6 měsíci +1

    Great ending... 🙂

  • @Tysman909
    @Tysman909 Před 7 měsíci +2

    Nice to see that TV working so well with just some adjustments. The part at the end was really cool great idea

  • @SDS-1
    @SDS-1 Před 7 měsíci +1

    Heck yeah Carlson and Shango TV videos today ❤❤

  • @davido.hamilton3254
    @davido.hamilton3254 Před 7 měsíci

    Thanx Mr. Carlson. It's the 1st. time for me that I've watched you working on a television, and you don't even need latex gloves like shango 066!

  • @dhpbear2
    @dhpbear2 Před 7 měsíci +2

    I owned a similar TV back in the mid-70s. "Instant on" (filaments are lit even when power is off!) and hot-chassis design ( I found THAT out the hard way when the ground-lead of my added audio cable came in contact with my radiator!)

  • @jonathanwhiteside6092
    @jonathanwhiteside6092 Před 7 měsíci +1

    My uncle was a TV repairman many years ago when valve TVs were the top tier technology. He would approve :). Also looks like it can straight out of Fallout!

  • @robertburrows6612
    @robertburrows6612 Před 7 měsíci +1

    That took me back to the days of being a young lad. Where I spent many a happy hour gazing in the back of a TV set, and fixing them to earn a few bucks . Those were the days they built things to last. The good old vacuum tubes last for years and survived faults the modern day equivalents can't great video

  • @bobbressi5414
    @bobbressi5414 Před 7 měsíci

    I am grateful to you and those like you, who study these outdated technologies to keep a critical part of history alive.

  • @jhoughjr1
    @jhoughjr1 Před 7 měsíci +1

    That’s a beauty. I use my trinitron CRT to collect smoke

  • @thatampguy
    @thatampguy Před 7 měsíci +1

    Haha clever ending

  • @yorgle
    @yorgle Před 7 měsíci

    I think my parents used to have this tv They got it as a wedding gift in 1961. I used to watch The Odd Couple and Taxi reruns on it. :D

  • @ohger1
    @ohger1 Před 7 měsíci

    I worked on hundreds of those. That vertical linearity is well within normal parameters for that design. This wasn't an expensive TV but vacuum tube vert deflection circuits aren't that linear. Since getting the linearity to play well with the overall height, centering, and vertical hold, it was always "robbing Peter to pay Paul". If they added a vertical centering control the adjustments would have been easier.