Killswitch - Wireless Footswitch - Video Manual
Vložit
- čas přidán 15. 03. 2022
- **Killswitch is not compatible with the original Powerbolt**
Toggling your device's power during sessions just got easier with the Killswitch, FK Irons' first ever power switch featuring an accelerometer sensor with no mechanical parts for complete wireless control. You can simply turn your device ON or OFF with just a tap of the device, and its built-in anti-slip mount allows it to stay in place. Connect the Killswitch with the Darklab app via Bluetooth to keep your device up-to-date with the latest firmware updates.
To Charge Killswitch: (Charge Killswitch for at least 5 hours before use)
To charge, lift the rubber plug and connect an energized USB-C cable. When the USB-C is powered, the GREEN LED light will turn on and remain solid, it will turn OFF when the battery is fully charged.
After Killswitch is charged, it is on automatically. To check, the LED light will blink PINK with each tap when NOT paired and the LED light will blink BLUE when it IS paired.
*There are two ways to Pair your device - On the device Manually and via Bluetooth with the Darklab iOS App - With the app you can control your device’s power, update the latest firmware and expand the features of the connected device. The Darklab App is Not Compatible with Android Devices*
To turn ON Killswitch: Press and hold the power button for 5-7 seconds, tap it at least five times to authenticate, the LED light will blink PINK with each tap, indicating it has not yet been paired.
To turn OFF Killswitch: Press and hold the power button until the GREEN LED light turns OFF (Around 10 seconds)
To Pair Killswitch with the Darklab App: In the app, Press [SCAN NEW DEVICES] and select Killswitch to connect. Once selected, it will automatically pair to the Darklab app. Click on Killswitch and update firmware if needed.
In the App Press [SCAN NEW DEVICES] and select the device you wish to pair. Press your desired device to access its control screen, then select the settings menu in the lower right corner, and under Killswitch turn the sync [ON] Only one device can be connected to Killswitch at a time and will disconnect from any device when it’s charging.
To Manually Pair your device to Killswitch: Press and hold both voltage buttons until the LED light turns PINK. Tap Killswitch until its LED light turns BLUE, then continue tapping until Killswitch turns the device on and off with each tap.
To Manually UN-SYNC your device from Killswitch: Press and hold the device’s power button until the LED light turns PINK The Order of LED COLORS are White, Blue, Green, Orange, Light Blue, then PINK
To re-sync, press and hold the power button until the LED light turns PINK.
To Manually UNPAIR your device from Killswitch: Press and hold both voltage buttons on your device until the LED light turns PINK and quickly flashes BLUE. then, press the voltage down button ONCE - the LED light will flash RED, indicating Killswitch has been unpaired. Now the LED light on Killswitch will blink PINK with each tap, indicating it is unpaired.
Follow FK:
Website: www.fkirons.com
Instagram: fkirons
Facebook: officialfkirons
Tic Tok: www.tiktok.com/@fkironsofficial
www.fkirons.com/pages/link-tree
My new kill switch and powerbolt + came today super stoked got them charging now !!!
And what did you think of it? Really curious if I should nab it or wait until they upgrade it next near like they did the now obsolete power bolts lol
hey buen dia me acabo de comprar la maquina como hago para emparejarla manualmente si tengo una batería de las nuevas
muchas gracias si por que mi cel por mas que he intentado no detecta ninguno de los dispositivos.
It’s a damn shame they never updated my power bolts. Instead they came out with new ones. Also just yesterday I was doing a tattoo and my exo stealth that I purchased 2months ago started lagging.
can es500 wireless footswitch will pair with hover?
Is it possible to then the Bluetooth off in fluxes
Dumb question. Is this compatible withe the hover?
Is it compatible with the Hoover?
Whoa whoa whoa what's this new little anti roll plastic piece around the battery does that come with the power bolt plus. ?!
Good eye! Coming soooon ;)
@@fkironsofficial Those are the new Powerbolt Plus+. I have 2 they are great. 15 hours of charge instead of 10
@@fkironsofficial when??
is this compatible with Bellar V2??
I just received my killswitch and I have the lightningbolt batteries. I don't have an apple phone or tablet. I can't figure out how to pair them via Bluetooth without having the Darklab app. My phone is a galaxy note 20 ultra just curious if they can be paired without the Darklab app? Thank you for your time
Yes, here you go czcams.com/video/F4EcReB0PhM/video.html
storage.googleapis.com/fkirons-bucket/machine-manuals/Killswitch_manual_2022.pdf
@@fkironsofficial love the products they just don't pair without a firmware update. But barrowed an apple product to pare via the app now they pair fine without the app. Thank you for your time
When is all of this going to get a app for Android? 87% of the market share and still no Android app. WTF?
It's still in the works.
Is it compatible with the lightningbolt batteries??
Yes 👍🏼
Is it compatible only with the big battery ?
It's only compatible with the new Powerbolt+
It’s a damn shame this thing only works when it wants! I’ve already sent out both my powerbolt + and killswitch to Miami to get repaired and it only worked for a few weeks and same Fucking issue! Killswitch isn’t working! Money down the damn drain I swear
Let's hurry up with that android app! No one wants an Iphone