[MSFS] ULTIMATE SETTINGS GUIDE 2024 | Tutorial

Sdílet
Vložit
  • čas přidán 12. 06. 2024
  • Microsoft Flight Simulator ULTIMATE SETTINGS GUIDE 2024 by Runway in Sight Aviation!
    Thanks for watching!
    If you enjoyed the video, don't forget to leave a LIKE and SUBSCRIBE for more great content.
    ➡️ PLEASE NOTE
    I use an UltraWide 1440p 165Hz monitor.
    My PC specs can be found in the description down below.
    Tweaks and settings mentioned in this video should give you the perfect balance of performance and graphics in Microsoft Flight Simulator.
    I tested these settings on multiple screens with different resolutions and refresh rates, resolutions including 1080p, 1440p, UltraWide 1440p and refresh rates of 60Hz and 165Hz, but only one PC setup. Please check my PC specs in the description down below.
    Because of these facts, I try to tell you more information about each important feature in the video, so you can adjust the settings according to your hardware.
    ➡️ LINKS
    HOW TO FIX SHADOWS IN MSFS / 4K SHADOWS - • [MSFS] HOW TO FIX SHAD...
    HOW TO MAKE MSFS LOOK ABSOLUTELY AMAZING IN 2024 - • [MSFS] HOW TO MAKE MSF...
    ➡️ TIMESTAMPS
    00:00​ Intro
    00:58 NVIDIA Control Panel Settings
    02:55​ Microsoft Flight Simulator Settings
    17:34 Visual Tweaks and Shaders
    17:56 Outro
    ➡️ SOCIAL MEDIA
    Twitch: / rwyinsight
    ➡️ GEAR
    CPU: AMD Ryzen 9 5900X
    GPU: MSI GeForce RTX 3080 VENTUS 3X PLUS 10GB OC LHR
    RAM: Kingston FURY 32GB KIT DDR4 3200MHz CL16 Beast Black
    MBU: MSI MAG B550 TOMAHAWK
    Drive: Samsung 980 1TB, Patriot Burst SSD 960GB (2x)
    Case: NZXT H710i Matte White
  • Hry

Komentáře • 106

  • @perfect_combination
    @perfect_combination Před 2 měsíci +2

    Awesome guide! Finally I got smoothness when turning the view and good performance! Thanks for the video!

    • @rwyinsight
      @rwyinsight  Před 2 měsíci +1

      Thank you mate, happy to help!

  • @AzuraCohen
    @AzuraCohen Před měsícem

    Hey there! I was having trouble with my HP Victus. Thanks to your video I got MSFS to look smooth on there. Bravo! 👌

  • @mattyman8983
    @mattyman8983 Před 4 měsíci +3

    finally i found the best msfs setting video... thanks

    • @rwyinsight
      @rwyinsight  Před 4 měsíci +1

      Thank you! More than happy to help. 😊

  • @SoSickAirways
    @SoSickAirways Před 3 měsíci +3

    Great video. Really helpful and wow, what a difference. 😊

  • @AviatorGM
    @AviatorGM Před 2 měsíci +1

    Thanks for taking the time to do this. I have no idea what half that stuff means in the video settings. I went with your settings, and it looks nice enough and performs great.

    • @rwyinsight
      @rwyinsight  Před 2 měsíci +1

      Hello, no worries! I am glad it works well for you 😉.

  • @alessandromontoya6195
    @alessandromontoya6195 Před 3 měsíci +1

    Great guide, thx so much! ❤

  • @andrevdw747
    @andrevdw747 Před 4 měsíci +1

    Thanks 👍🏻

  • @Britalex
    @Britalex Před 2 měsíci +5

    I think glass cockpiut refresh to medium is definetely noticeable.. I would advocate for high always.

    • @juanwhick1691
      @juanwhick1691 Před měsícem

      Can notice it in the Comanche. If on medium you don’t see the plugs spark off all the time on the tablet. High and it don’t miss a beat.

  • @jackwoud
    @jackwoud Před 3 měsíci +2

    Interesting video for me because our peripheries are almost the same, only my screen resolution is a bit higher.
    I'm going to carefully try it out and see how far I get with it, thanks for sharing your wisdom and success with the hobby and you have another subscriber.👍

  • @TheOGReeceYT
    @TheOGReeceYT Před 3 měsíci +2

    Low power mode should probably be switched on! It only changes the moving graphic in the main menu to a static one to save some usage in the menus.

  • @zimbabouer656
    @zimbabouer656 Před 2 měsíci +1

    Bro you saved so much thanks a lot !

  • @TommySV
    @TommySV Před 24 dny

    Brilliant video! Hopefully I'll see some better results💪🏼 one question.... Hardware -accelerated GPU Scheduling on or off?

  • @dominikraith1871
    @dominikraith1871 Před 4 měsíci +3

    Great video, many thanks for complete settings Guide!

    • @rwyinsight
      @rwyinsight  Před 4 měsíci

      Thank you! Happy to help. 😉

  • @holobolo1661
    @holobolo1661 Před měsícem

    What's the point of turning aniso filtering on to 16x if it's already 16x in MSFS settings and set as application controlled in nvcp?

  • @ElCapiVargas
    @ElCapiVargas Před 3 měsíci +3

    Excellent video. my MFS2020 is now flying at an average of 54-60 FPS. Thanks for your tutorial!

    • @rwyinsight
      @rwyinsight  Před 3 měsíci

      Thank you! Happy to help 😊

  • @omarbth5238
    @omarbth5238 Před 14 dny

    Hello, will the weather, weather quality, drawings and number of frimes be updated, when will the game be released and what are the ideal requirements? Pro

  • @IslandSimPilot
    @IslandSimPilot Před 3 měsíci +1

    Hey buddy, just want to encourage you to keep it up, you're putting out some great content!

    • @rwyinsight
      @rwyinsight  Před 3 měsíci +1

      Thank you so much for your kind words. This really means a lot to me and keeps me motivated to produce quality videos!

    • @IslandSimPilot
      @IslandSimPilot Před 3 měsíci +1

      @@rwyinsight I know exactly what you mean! Keep it up man, you're getting some well-deserved attention.

  • @gingerninja7728
    @gingerninja7728 Před 2 měsíci +1

    great video mate. Anything else to check in Windows? Game mode on or off? HAGS on or off? Thanks

    • @rwyinsight
      @rwyinsight  Před 2 měsíci +1

      Thank you, I would turn game mode on and have hardware acceleration on as well. 😉

  • @redb8213
    @redb8213 Před 2 měsíci +1

    Excellent tutorial. My frames increased from 30 to 45. I have watched my frame count for months, so I know this worked. Many thanks from Down Under. Cheers Red. 😊

    • @rwyinsight
      @rwyinsight  Před 2 měsíci +1

      Thanks! Happy to help 😉

    • @redb8213
      @redb8213 Před 2 měsíci +1

      @@rwyinsight & subscribed my friend. Thanks so much. 😊

    • @rwyinsight
      @rwyinsight  Před 2 měsíci +1

      Appreciate it!

    • @redb8213
      @redb8213 Před 2 měsíci +1

      @@rwyinsight Now to check out your other videos. I am currently up 25 frames. Never hit 55 since I installed MSFS. Cheers.

  • @suriowl
    @suriowl Před 3 měsíci

    Thanks for the video. May I ask you some questions?
    1. Why set things like anisotropic filtering and low latency in the NVIDIA control panel when you can set them in-game?
    2. What are the reasons behind setting "Texture filtering - Anisotropic Sample Optimization" to "OFF" and "Negative LOD Bias" to "CLAMP" in the control panel?

    • @rwyinsight
      @rwyinsight  Před 3 měsíci +1

      Hello, sure!
      1. I figured out these settings from performance tests with both options. With NVIDIA control panel, I had slightly better frames.
      2. These settings are again the best I’ve used in MSFS so far. Sample Optimization does not work well in MSFS and I switched LOD Bias to Clamp after my friend ran some test as well.

  • @holobolo1661
    @holobolo1661 Před měsícem

    Render scaling makes a huge difference to AA and is one of the best ways to utilize excess GPU power once all other GPU affinities have been maxed.

  • @GardenData61371
    @GardenData61371 Před 3 měsíci +2

    This was really helpful for me. I have pretty much same specs and screen resolution. Tnx bud :D

    • @rwyinsight
      @rwyinsight  Před 3 měsíci +1

      Perfect! Happy to help 👍

  • @Gtapolice123
    @Gtapolice123 Před 3 měsíci

    How far do you actually see with the Objects LOD and Terrain LOD that low?
    Do you see a big difference with those turned down, compared to having it at 250 for example?

    • @rwyinsight
      @rwyinsight  Před 3 měsíci

      I do not know the exact numbers, but it makes a big difference on performance.

  • @JBAviation
    @JBAviation Před 3 měsíci

    Thanks dude! Quick question do you leave your monitors refresh rate at 165hz or do you lower it? Also do you use Gsync?

    • @rwyinsight
      @rwyinsight  Před 3 měsíci

      Hello, I am glad you like the video!
      I do indeed use 165 Hz all the time and I use G-Sync for fullscreen only.

    • @JBAviation
      @JBAviation Před 3 měsíci +1

      @@rwyinsight Cheers!

    • @JBAviation
      @JBAviation Před 3 měsíci

      @@rwyinsight Sorry one last question, do you have variable refresh rate enabled in windows settings?

    • @rwyinsight
      @rwyinsight  Před 3 měsíci +1

      @@JBAviation No worries, I have it locked to 165 Hz.

  • @simpilotspud8296
    @simpilotspud8296 Před měsícem

    I’ve always been confused about this concept but my monitor is 4k resolution and has a refresh rate of 60hz. So should I set my resolution to 3840x2160 in the sim? Will that mean that I’m playing my sim at 4k? Which if that’s the case won’t that impact performance. I have a 3070 and I run my sims resolution at 1440p and it runs smooth but not sure what I should be doing

    • @rwyinsight
      @rwyinsight  Před měsícem

      Hello, if you have a 4K monitor, go for 4K resolution. If you have a Quad HD monitor, go for 1440p resolution.

  • @shimizu67
    @shimizu67 Před 17 dny

    Why in the world would you not activate DX12? It might still be in beta because of frame generation, but it brings a lot of performance enhancements. On top of that, you should say in the title that this is for low-end PCs, you basically have everything set to off or medium.

  • @vassilikarayannis6219
    @vassilikarayannis6219 Před 3 měsíci +1

    Straight-to-the-point tutorial. Well done buddy! My frames are more than acceptable now. Thank you.

  • @pappinr
    @pappinr Před 3 měsíci +1

    Very helpful. thank you.

  • @RobertHopkinsArt
    @RobertHopkinsArt Před 2 měsíci

    I have an LG C2 4K tv that I use for MSFS. I get confused on whether to use the native resolution of 3840 x 2160 for this TV or 4096 x 2160. My TV will now have black borders on the side if I use 3840, I believe. If I use 4096 will the text in the cockpit be blurry and I really should use 3840?
    Thanks for your help!

    • @rwyinsight
      @rwyinsight  Před 2 měsíci +1

      Hello, the native resolution of your TV should be 3,840 x 2,160 px. Because of that, I would go for 3,840 x 2,160 px in the MSFS settings as well.

    • @RobertHopkinsArt
      @RobertHopkinsArt Před 2 měsíci +1

      Excellent! Thanks so much.

    • @rwyinsight
      @rwyinsight  Před 2 měsíci

      No worries 😉

  • @nickdesai6829
    @nickdesai6829 Před 4 měsíci

    Good video but what are your specs? I have a 4090 and 13900k so higher settings than yours ok?

    • @rwyinsight
      @rwyinsight  Před 4 měsíci +1

      Hello, my PC specs are in the video description. You can go up with the settings a bit.

  • @dcoraviation
    @dcoraviation Před 4 měsíci

    If I'm using frame gen, should I use to vsync too?

    • @rwyinsight
      @rwyinsight  Před 4 měsíci

      Hello, in that case I wouldn’t recommend the use of vsync.

  • @elbapino6531
    @elbapino6531 Před 3 měsíci

    Hello friend, with yours settings, do we need to activate latency in window graphic setting ?

    • @rwyinsight
      @rwyinsight  Před 3 měsíci

      Hello, which exact settings do you have in mind please?

    • @elbapino6531
      @elbapino6531 Před 3 měsíci

      @@rwyinsight in window system then graphics setting, the is low latency activating

    • @elbapino6531
      @elbapino6531 Před 3 měsíci

      @@rwyinsight it called "hardware accelerated GPU scheduling in (win 11) system->Display->Graphics-> Default graphic settings

  • @erikhany4486
    @erikhany4486 Před 4 měsíci

    You should get youself a vr headset. Adds a lot to the immersion. 👍

    • @rwyinsight
      @rwyinsight  Před 4 měsíci

      Hello, I need to get into VR for sure!

    • @erikhany4486
      @erikhany4486 Před 4 měsíci +1

      @@rwyinsight Yes, you should at least try it. I have the Pimax Crystal, and the sharpness is overwhelming. But of course, flying in VR gives limitations, I can’t surf other websides when I’m in the cockpit, so I have to get everything ready in advance of the flight. But the immersion is great!!!

  • @juanwhick1691
    @juanwhick1691 Před 3 měsíci

    For some reason my fps didn’t budge when I changed from low to ultra grass. 5800x3d but 3060 12GB

    • @rwyinsight
      @rwyinsight  Před 2 měsíci +1

      Hello, it seems like for some systems it may not have a big effect. I would keep it at a lower value just because you may find yourself flying to an airport scenery with a lot of grass and then it can hit your frames.

    • @juanwhick1691
      @juanwhick1691 Před měsícem

      @@rwyinsightjust got my 4070 ti super and was getting about 70fps. Switched to dx12 to try frame gen and it was good for a minute then I was at 17GB/ 16Gb on the FPS viewer. 15fps and like 70ms on the cpu and GPU (was in the purple) WTH…

  • @user-fb8wb6ni6l
    @user-fb8wb6ni6l Před měsícem

    Safe travels where you flying in Atlanta

  • @dragonalllegendsevolutione3419

    how to ativate dlss im on 1,19

  • @feraaz.9901
    @feraaz.9901 Před 4 měsíci +1

    why dont u use the frame gen mod?

    • @rwyinsight
      @rwyinsight  Před 4 měsíci +5

      Hello, because frame gen is far from perfect. It works fine when looking forward and not moving with the camera. When you move the camera fast, the frame gen just can’t keep up (MSFS is a really heavy game on live data and auto gen).
      I tested it out as well but it really was better to stick with your own resources for the time being.

    • @feraaz.9901
      @feraaz.9901 Před 4 měsíci +1

      @@rwyinsight ok thanks

  • @gibanica87
    @gibanica87 Před měsícem +1

    Dude thosw settings are rather for pentium 5 than 3080
    It could go much much higher

    • @rwyinsight
      @rwyinsight  Před měsícem

      Not really with add-ons like Fenix A320, heavy sceneries and ultra-wide screen for example :) . These settings will give you the ultimate balance between visuals and performance.

  • @tomrach8092
    @tomrach8092 Před 3 měsíci

    Ok. And what settings for RTX4xxx GPU owners?

    • @rwyinsight
      @rwyinsight  Před 3 měsíci

      I would try the same settings and see what your performance is. You should get higher frames than I do so you can step up your settings a notch without any issues.

    • @tomrach8092
      @tomrach8092 Před 3 měsíci

      @@rwyinsight I mean exactly those options that you cannot use, i.e. FG. Well, then I would have to have DX12 mode turned on. And apparently it's defective. What do you think?

    • @rwyinsight
      @rwyinsight  Před 3 měsíci

      @@tomrach8092 Frame Gen does not work very well in MSFS yet since it uses live data streaming.

  • @ReidsAviation
    @ReidsAviation Před 2 měsíci

    some of these settings made my game refuse to open due to a "graphics device issue"

    • @rwyinsight
      @rwyinsight  Před 2 měsíci

      That is really weird since these exact settings work for me and mamy others just fine. Try to reset to default and then going one by one to know exactly which option is the problematic one. Thanks

    • @ReidsAviation
      @ReidsAviation Před měsícem +1

      @@rwyinsight I had to delete my Nvidia driver completly and reinstall. My simulator seems to be working fine for now if it helps anyone

    • @rwyinsight
      @rwyinsight  Před měsícem

      @@ReidsAviation Thanks for letting us know! More than happy to hear that it works for you ☺

  • @nexe7271
    @nexe7271 Před 4 měsíci

    What about VR?

    • @rwyinsight
      @rwyinsight  Před 4 měsíci

      I do not have a VR set, so I can’t really help you with that, sorry.

  • @Danox23
    @Danox23 Před měsícem

    No DLSS?! I can already not take this guide seriously because of that, or is there something wrong with DLSS in this game?

    • @rwyinsight
      @rwyinsight  Před měsícem

      Hello, because frame gen is far from perfect. It works fine when looking forward and not moving with the camera. When you move the camera fast, the frame gen just can’t keep up (MSFS is a really heavy game on live data and auto gen).
      I tested it out as well but it really was better to stick with your own resources for the time being.

  • @kler-xv3tj
    @kler-xv3tj Před měsícem

    13:09

  • @SRN42069
    @SRN42069 Před 4 měsíci +6

    Doesn't work for AMD users 😭I feel like everyone forgets about AMD users its annoying.

    • @rwyinsight
      @rwyinsight  Před 4 měsíci +3

      I am sorry to hear that but I have an alternative solution for you. Instead of setting up NVIDIA Control Panel, you can set these settings in Windows and MSFS itself. The point I am trying to prove is that it is better to set the mentioned settings in the Control Panel because of better performance.
      Regarding NVIDIA Freestyle (in-game filters), there is also a way how to set something similar for AMD GPUs. Please check out my other video on how to make MSFS absolutely amazing for free for more information. Thanks for understanding.

    • @DanBirasi
      @DanBirasi Před 4 měsíci +1

      Why would you buy an AMD card in the first place. I have an AMD processor - but a graphics card? Why??? Those few bucks you saved will bite you in the ass everyday (as this video proves).

    • @petergonzalez5245
      @petergonzalez5245 Před 3 měsíci

      Buy a Nvidia card it’s worth it

    • @paletobay1017
      @paletobay1017 Před 2 měsíci +1

      @@DanBirasidamn you didn't hold back on him 😂 but no I learned pretty fast that AMD users don't get much attention in performance tutorials.

    • @Coach_McGuirk
      @Coach_McGuirk Před 2 měsíci

      Womp womp

  • @Thoddy398
    @Thoddy398 Před 4 měsíci

    You lost me with „no Beta“. So no DLSS and no FR? Good bye 👋

    • @rwyinsight
      @rwyinsight  Před 4 měsíci +5

      Correct, DLSS does not work that well in open world games. I tested it multiple times and always went back to my natural resources.