Glad everyone is enjoying the build video. Remember to always be safe - for you and others - working with model rockets or anything similar, even if they're small. It's only fun if no one gets hurt.
I took an aerospace engineering class in highschool, and when we made model rockets, I mounted the engine retainer wrong so when the second stage went off it blew the entire assembly out the back instead of blowing the cone off and deploying the parachute. The result was a rocket powered lawn dart that landed 20 feet from the landscaper
One thing I noticed for small-diameter launchers is that the rocket will almost always have a super low and unstable exit velocity. If instead the launcher used a sealed tube and ditched the "recoilless" aspect you could get much better exit velocity and a more stable accurate flight. Or use a booster charge with a counterweight to get the same effect.
left for over 5 months after making yokai watch videos for a few years and makes his come back well known by making an entire rocket launcher. this man is absolutely insane and I love it.
Mate this is the first video I've seen of yours, I expected to see more of the same great content, and I've gotta say, yours absolutely great, and I like the direction you're going
I like how this dudes entire channel is yokai watch (no offense to yokai watch since its one of my favorite shows) and then he waits for a year to come back with a rocket launcher.
I really enjoyed how you did the commentary, even how you admitted that you didn't get it right the first time (but didn't over dramatize the failures like saying; "I only had one more shot to get this right or it was all for nothing" for example). To that end I think the least I can do is leave a like, comment, subscribe and hit the notification icon. Cheers, thanks for the video.
I saw the notification pop up and thought it was a new Puni video. Well, color me surprised! I was NOT expecting a full on rocket launcher. Glad to see you're back with new content man. Keep up the good work! (and maybe add an outro so the video doesn't end abruptly)
and by adding the ability to give axial rotation to the rocket, we get a more even trajectory during the main part of the flight, which will affect the “accuracy” (well, at least within a meter of the “target”) and the entertainment of the flight: for a rocket rotating along its axis, the exhaust acquires some helicity.
literally did something similar, as a kid. It was rather funny as I had a tube of pvc, and couldn't fit the rocket. So I hot glued fins directly onto the rocket engines, not thinking it through fully. I fired the rocket and it went straight because I actually done some research and built proper fins. But it only went straight for about 10 feet, at that point the rockets fins detached and now it was a completely unguided, finless rocket. It promptly made a 180 turn and flew straight at me. Fun times as a kid.
I built a RPG for my 1985 school science program I did almost exactly this and stabilized the rockets by adding weight to the nose. I added 4 extra fins. I used a metal coat hanger, a 2x4 and broomstick, hinge, and plastic pvc tube, and clear plastic clip board for a blast shield . It hit the target every time.
This is superb, really awesome idea and execution! One thing I would say for the future, if you make another version... use PETG, it has higher temperature resistance and is also chemical resistant. On top of that it's generally stronger too by a large degree. You can get it in all the colours you used!
Acetone or Butanone are actually great plastic welding agents for any future projects. They have specific plastics and use cases they work better for, but i use acetone to bond bindings for guitar.
Glad to see you doing what you like to do, in my opinion making a rocket launcher and 3d Modeling is way more entertaining than puni. Super cool rocket and keep up the great videos
Whole thing was fun to watch, fairly informational even though I didn't learn anything, but I'm definitely rewatching so maybe I'll actually pick the information up next time.
You could simplify construction by using a Bambu X1 and its ability to print more than one color.and/or transparent filament - especially on the arming indicator case window.. this would eliminate the need to use a resin-based printer. I LOVE the detail and multi-color printing features of my Bambu X1 Carbon FDM printer!
Nice build, seems reminiscent of the USMC Mk153 SMAW. I wish you had included a full length shot of the launcher after it was completed, in addition to the b-roll tracking shot.
Dude just made a rocket launcher using only a 3d model designer software, a 3d printer, and a resin printer. The materials are pretty easy to find and you could probably get them at your local home depot, or other hardware stores. If this is possible, we can technically mass-produce these. Imagine if the missile was a tad bit more accurate, the thrust stronger, and the bulb containing a bit of explosives. Imagine what could happen.
I'm gonna guess "model rocket engines would be outlawed" is what could happen. (Also, the rocket launcher can be made using pipes from the hardware store.)
Cool build. I made something similar back when I was abt 12-13. But mine was mostly PVC pipe construction.. I had a handful of model rockets as a kid, most using those same tiny motors you used (about the size of a AAA battery) but I also had 2 Star Wars model rockets that used a larger motor, about wide as a stack of nickels and a little over 2" long. And I had a tube of thin plastic that would fit it perfectly, so I cut a piece down, made a nose cone and some fins and attached the motor, got a PVC tube that it fit inside of nicely, drilled some holes, glued on handles and the rocket starter, ran wires up to the back of the tube to attach to the ignitor, with a rubber band operated safety trigger that dropped 2 pins that rose up a bit in front and behind the rocket to keep it sliding out the tube. After a bit if work getting the rocket weight and balance right it was so amazingly fun and launched far, accurately. I even added a little paintball red dot sight to it. But if it had looked as good as yours did it this build, it would have blown my mind lol. Thats what I pretended it looked like in my imagination rather than just a janky painted pvc pipe.. Still was alot of fun though. And later I made another little brother to it that shot slightly modified small bottle rockets about 3/4" wide and 5" long.. just using the same positioning pins to hold it steady in the tube and a long BBQ lighter that drilled into the tube and glued in to light the fuse. Not quite as long range or anywhere near as accurate, even w rudimentary fins. They just weren't made to shoot horizontally w the weight and balance, without the stick too.. but it made a fun noise and had the satisfying pop about a second after you launched it off... such good times lol.. maybe I should use your files and make me this thing to play around with
Great video. Made me a subscriber. The soundtrack was epic and the build awesome. I would love to have a 3D printer but know I wouldn’t take the time to learn it well enough.
Just finished watching the vid, it may be different then the usual but it was time fun to watch, I wouldn't mind if you've convert your channel to a building channel. I could understand If you gotten sick of the game for playing it for so long. Puni puni content or not I'll still watch any vid 👍
I think the rocket can be made to fly more accurate if you make the fins tilt by little bit to incur a spin on the projectile, spin creates more stability
😂 I thought I found a Chanel about making stuff so imagine my surprise when I look at the channel and find nothing but Yokai watch! I was so confused because this is very personal and I thought you had to have made videos like this before now 😂
I was just about to ask if there were a lot of iterations edited out or if you were just an absolute design God when I got to the last few seconds. I'm glad I'm not the only one with a pile of suboptimal parts left over at the end of a project.
First off, great video - very enjoyable! I think it would be fun to see a collab with another CZcamsr where you shoot a rocket that does something interesting, like shoots a drone or something? (Meaning a rocket that launches a working/piloted drone) Keep up the great work 💪🏻
I hope the ATF didn't come knocking. This device may or may not meet the definition of a Destructive Device under the National Firearms Act of 1934. The bore diameter of the launcher is over 1/2 inch, and the rocket ignition system is not primitive (but it is technically separate, so it might not meet the definition of "fixed ammunition"). You could argue it is a "black powder cannon", but it is not a replica of anything made before 1898. It does not have a common sporting purpose. Such a device is legal to make and own, provided you fill out and submit ATF Form 1 and wait for the 5 to 200+ days for it to be approved and the tax stamp (paperwork) to arrive in your mailbox.
thanks for actually finishing and perfecting your build before releasing a video. I find it incredibly annoying when tinkering channels clickbait me with their failed experiments that never were properly completed.
Awesome build I love the iterations and testing. The hand driver you have is probably not made anymore do you know name or model number from craftsman? Is it an actual 3 jaw chuck to accept drill bits?
Glad everyone is enjoying the build video. Remember to always be safe - for you and others - working with model rockets or anything similar, even if they're small. It's only fun if no one gets hurt.
Are you still going to do puni puni videos
Would you mind to upload the stl to printables?
Are you dead?
Robbet are you still going to make Puni videos?
@@infinitechaos405 I don’t think he’s going to make videos
"because I can" the best argument in the world
Absolutely! It's the perfect opposite of "why do you need xyz". I don't need it, I want it, because I can.
its the only
I totally agree
I agree
This man disappeared for 5 months to make a rocket launcher.
Absolute mad lad.
Seriously good to see you are still around.😁
Thanks so much :)
:)
most weird ass ending for a yokai watch channel
Now fr😭
Yokai watch is dead pretty much
@xlbthedemigod5662 It's not
@@xlbthedemigod5662 no its not
Tbh it’s the best ending, this video was actually so good.
Not an rpg manufacturer but an enthusiast
The proper name for the Ignition assembly is the breach
I found this video and was like oh a new 3D printing guy to watch and I was so surprised by all the yokai watch videos instead 💀
Same
Guys, watch out, when he comes back in a year he's gonna have a tank.
A 3d printed tank!
I took an aerospace engineering class in highschool, and when we made model rockets, I mounted the engine retainer wrong so when the second stage went off it blew the entire assembly out the back instead of blowing the cone off and deploying the parachute.
The result was a rocket powered lawn dart that landed 20 feet from the landscaper
"let's check out this person's other 3D printing vide- oh. What the hell are these"
this is the definition of "I reject your realty and substitute my own"
This man really went from mobile gaming to building rockets and peaced out. Definitely a good way to end a channel on a high note.
your dog is now on an ATF watchlist
you mean hitlist
nope@@DatBoiOrly
One thing I noticed for small-diameter launchers is that the rocket will almost always have a super low and unstable exit velocity. If instead the launcher used a sealed tube and ditched the "recoilless" aspect you could get much better exit velocity and a more stable accurate flight. Or use a booster charge with a counterweight to get the same effect.
"we do what we must, because we can"
we're making it onto the watchlist with this one boys
Only if we add the g to the rp
This man went from making puni vids to making literally rocket launchers this is truly sciences alright
left for over 5 months after making yokai watch videos for a few years and makes his come back well known by making an entire rocket launcher. this man is absolutely insane and I love it.
Not sure what those weird game videos you used to do were... but this was actually kind of cool. You should keep doing stuff like this.
The content whiplash present on this channel is astounding, but the build is more than worth it
Mate this is the first video I've seen of yours, I expected to see more of the same great content, and I've gotta say, yours absolutely great, and I like the direction you're going
Most loved/hated airsofter in the field
I like how this dudes entire channel is yokai watch (no offense to yokai watch since its one of my favorite shows) and then he waits for a year to come back with a rocket launcher.
If you put a small ledge on one side of the back edge of each fin to make those rockets spin, they'll fly a lot straighter. Nice job on the launcher!
This remonds me of the rocket launcher called "Direct Hit" from Team Fortress 2.
I really enjoyed how you did the commentary, even how you admitted that you didn't get it right the first time (but didn't over dramatize the failures like saying; "I only had one more shot to get this right or it was all for nothing" for example). To that end I think the least I can do is leave a like, comment, subscribe and hit the notification icon. Cheers, thanks for the video.
We evading the ATF with this one
If you weren't on a fbi list you are now
I saw the notification pop up and thought it was a new Puni video. Well, color me surprised! I was NOT expecting a full on rocket launcher. Glad to see you're back with new content man. Keep up the good work! (and maybe add an outro so the video doesn't end abruptly)
Will do :)
ROB WE MISSED YOU
101 likes
Love the new content 🎉
😂
Barely know him already do
And now you are missing him again lol
and by adding the ability to give axial rotation to the rocket, we get a more even trajectory during the main part of the flight, which will affect the “accuracy” (well, at least within a meter of the “target”) and the entertainment of the flight: for a rocket rotating along its axis, the exhaust acquires some helicity.
im glad i can watch joe Swanson build a rocket engine these days
That rocke shot upward just like the Javelin Missile 😂.
Flew straight, though.
literally did something similar, as a kid. It was rather funny as I had a tube of pvc, and couldn't fit the rocket. So I hot glued fins directly onto the rocket engines, not thinking it through fully. I fired the rocket and it went straight because I actually done some research and built proper fins. But it only went straight for about 10 feet, at that point the rockets fins detached and now it was a completely unguided, finless rocket. It promptly made a 180 turn and flew straight at me. Fun times as a kid.
I built a RPG for my 1985 school science program I did almost exactly this and stabilized the rockets by adding weight to the nose. I added 4 extra fins. I used a metal coat hanger, a 2x4 and broomstick, hinge, and plastic pvc tube, and clear plastic clip board for a blast shield . It hit the target every time.
This is superb, really awesome idea and execution! One thing I would say for the future, if you make another version... use PETG, it has higher temperature resistance and is also chemical resistant. On top of that it's generally stronger too by a large degree. You can get it in all the colours you used!
I'd use a metal pipe for a barrel liner, personally.
Now let's talk about warheads
Acetone or Butanone are actually great plastic welding agents for any future projects. They have specific plastics and use cases they work better for, but i use acetone to bond bindings for guitar.
Loving the new style content, hopefully we’ll see more of this and glad to see you back man❤️
Glad to see you doing what you like to do, in my opinion making a rocket launcher and 3d Modeling is way more entertaining than puni. Super cool rocket and keep up the great videos
Can you show us how to build a nuke?
Would be really good.
Uhh for a school project ofc.
I don't know if your still doing puni, but if I you don't, I love this type of content, so either way, I'll be happy.
Hi i come from a year into the future. Sadly he has not builded a tank. Should we give him one more year?
@@DR-hb6zoperhaps
Super great to see that you are uploading other stuff, great video and looking forward to more like this!!
"I want to see that impossible stage yo-kai not befriend me now"
"New video soon" its been a year please come back I loved this
Amazing build, good jokes thrown in, super neat result!
Whole thing was fun to watch, fairly informational even though I didn't learn anything, but I'm definitely rewatching so maybe I'll actually pick the information up next time.
that was awesome. Showing more of the design process and even the failed attempts would be really good to watch too!
You should share your files on odyssey.
This video earned you a sub.
I like the last 10 seconds - my life! Great project and absolute awesomeness on the snuggly pressfit of all the parts!
This is a ZZZ rank meta changing soultimate. Good to see you back.
You could simplify construction by using a Bambu X1 and its ability to print more than one color.and/or transparent filament - especially on the arming indicator case window.. this would eliminate the need to use a resin-based printer. I LOVE the detail and multi-color printing features of my Bambu X1 Carbon FDM printer!
This video was worth the wait! Great job Robbett, you legend
Nice build, seems reminiscent of the USMC Mk153 SMAW. I wish you had included a full length shot of the launcher after it was completed, in addition to the b-roll tracking shot.
Dude just made a rocket launcher using only a 3d model designer software, a 3d printer, and a resin printer. The materials are pretty easy to find and you could probably get them at your local home depot, or other hardware stores. If this is possible, we can technically mass-produce these. Imagine if the missile was a tad bit more accurate, the thrust stronger, and the bulb containing a bit of explosives. Imagine what could happen.
I'm gonna guess "model rocket engines would be outlawed" is what could happen.
(Also, the rocket launcher can be made using pipes from the hardware store.)
this vid was absolutely crazy, earned yourself a new sub
Cool build. I made something similar back when I was abt 12-13. But mine was mostly PVC pipe construction.. I had a handful of model rockets as a kid, most using those same tiny motors you used (about the size of a AAA battery) but I also had 2 Star Wars model rockets that used a larger motor, about wide as a stack of nickels and a little over 2" long. And I had a tube of thin plastic that would fit it perfectly, so I cut a piece down, made a nose cone and some fins and attached the motor, got a PVC tube that it fit inside of nicely, drilled some holes, glued on handles and the rocket starter, ran wires up to the back of the tube to attach to the ignitor, with a rubber band operated safety trigger that dropped 2 pins that rose up a bit in front and behind the rocket to keep it sliding out the tube. After a bit if work getting the rocket weight and balance right it was so amazingly fun and launched far, accurately. I even added a little paintball red dot sight to it. But if it had looked as good as yours did it this build, it would have blown my mind lol. Thats what I pretended it looked like in my imagination rather than just a janky painted pvc pipe..
Still was alot of fun though. And later I made another little brother to it that shot slightly modified small bottle rockets about 3/4" wide and 5" long.. just using the same positioning pins to hold it steady in the tube and a long BBQ lighter that drilled into the tube and glued in to light the fuse. Not quite as long range or anywhere near as accurate, even w rudimentary fins. They just weren't made to shoot horizontally w the weight and balance, without the stick too.. but it made a fun noise and had the satisfying pop about a second after you launched it off... such good times lol.. maybe I should use your files and make me this thing to play around with
My man got gorilla arms- 💀 But nah really, welcome back man. We missed ya
this was helpfull ^^ i whant to design again stuff its been waaay to long and watching you make this was fun hope you make more projects
You bought a rocket launcher for home defence this is what the founding farthers intended
Great video. Made me a subscriber. The soundtrack was epic and the build awesome. I would love to have a 3D printer but know I wouldn’t take the time to learn it well enough.
Is this project available to download anywhere ? this looks super cool.
It's Official.
Robbett Does Indeed Have Hands.
Two of them
@@RobbettOh, good. So there were no major rocket malfunctions.
Just finished watching the vid, it may be different then the usual but it was time fun to watch, I wouldn't mind if you've convert your channel to a building channel. I could understand If you gotten sick of the game for playing it for so long. Puni puni content or not I'll still watch any vid 👍
I think the rocket can be made to fly more accurate if you make the fins tilt by little bit to incur a spin on the projectile, spin creates more stability
Switch to using Orca Slicer and use its hole calibration for better fitment. Makes printing 10x more fun when stuff goes together the first time.
No idea what puni is but this video showed up in my recommended and I'm glad I watched it!
Quote of the day "in case you need a rocket launcher in your everyday carry.."
😂 I thought I found a Chanel about making stuff so imagine my surprise when I look at the channel and find nothing but Yokai watch! I was so confused because this is very personal and I thought you had to have made videos like this before now 😂
I was just about to ask if there were a lot of iterations edited out or if you were just an absolute design God when I got to the last few seconds. I'm glad I'm not the only one with a pile of suboptimal parts left over at the end of a project.
I hope you make more videos like this and videos of puni too. Good luck Robbett!!!
First off, great video - very enjoyable!
I think it would be fun to see a collab with another CZcamsr where you shoot a rocket that does something interesting, like shoots a drone or something? (Meaning a rocket that launches a working/piloted drone)
Keep up the great work 💪🏻
Wait, ROBBETT Watch is not a ROBOT??? What an unexpected twist
Whoa...very cool! Good to see you back, and with brand new content!!
Glad to be back!
Welcome back, missed watching your content
This is absolutely amazing quality great job there. I definitely want one of those after seeing this ❤❤❤.
Love this content just as much as the puni content. Good luck Robbett.
"I'm rob and the ATF isn't gonna like this one" 😂
I miss this man.
i just love explosives and projectile launchers
especially joreg!
I’m new to the channel and I love it! Keep building my man
The army need to take notes for an affordable shoulder mounted RPG
I know I am
Even if scaled up it would be utterly useless against anything but a very slow unmarred man with haemophilia or brittle bone disease.
Welp
It's called a LAW.
*The only acceptable home defense weapon*
Nah. He didn't implement the G part of his RPG.
Rotating fins would need a cover to be able to load inside the launch tube (similar to RPG recoilless rifles).
"were going to be just fine". amazing
That’s awesome dude! Even looks better than real military launchers. Nice work! 👍👍
I hope the ATF didn't come knocking. This device may or may not meet the definition of a Destructive Device under the National Firearms Act of 1934. The bore diameter of the launcher is over 1/2 inch, and the rocket ignition system is not primitive (but it is technically separate, so it might not meet the definition of "fixed ammunition"). You could argue it is a "black powder cannon", but it is not a replica of anything made before 1898. It does not have a common sporting purpose.
Such a device is legal to make and own, provided you fill out and submit ATF Form 1 and wait for the 5 to 200+ days for it to be approved and the tax stamp (paperwork) to arrive in your mailbox.
Ok fun police
Womp womp
This looks really good, can’t wait to see what a V2 looks like
Design, look, function. All ready for zombie apocalypse!!
get this man a deal with the army
my god thats beautifull! hopefully you come bang eith another build banger!
I really like your voice man, it's so soothing to listen to.😌
Thank you!
Like the new style and I wouldn’t mind if you completely change from puni to this or if you did a mix between puni and this new style
4:20 In tanks and cannons they’re called breaches, I believe…
I can't believe this video is a year old. We need MORE!!!
Great project!
I will Support you man💕
thanks for actually finishing and perfecting your build before releasing a video. I find it incredibly annoying when tinkering channels clickbait me with their failed experiments that never were properly completed.
Robbet when he doesn't want to make the 2000th Puni video:
my man whats ur discord, i am a fellow marxist
@@tbuilder_ I did not expect this.
Marxist Boi#4501
@schizogod uh, ok.
Awesome build I love the iterations and testing.
The hand driver you have is probably not made anymore do you know name or model number from craftsman? Is it an actual 3 jaw chuck to accept drill bits?
Keep up the great work!