2019+ Silverado 4 Piston Calipers On My NNBS 2011 Sierra Denali!! 07-13 Silverado/Sierra
Vložit
- čas přidán 6. 09. 2024
- This 2019+ Silverado/Sierra 4 piston caliper upgrade is so worth the money!! I got everything for under $500
Everything was sourced from rock auto
Calipers
13545382
13545383
Powerstop Pads
162173 (1 box comes with all 4)
Rotors
BR901832 (You’ll need 2)
Caliper Bracket Bolt
18K17004 (Can reuse stock but these look much better, order 2)
Washers to center the caliper on the rotor, I used 2 for each bolt - 8 total
M14 Flat Washer, 304 Stainless... www.amazon.com...
Can probably just get these from Lowe’s
1/2” extended wheel studs
Dorman part # 610-530
1/2” hubcentric wheel spacers from
www.alphawausa...
Good catch on the bleeder and glad you video'd it. I've had now TWO people come back to me saying the upgrade has a soft pedal and they send me a photo of the caliper with the bleeder facing down. Air rises in liquid. BLEEDER UP!!! There's a thread on the performancetrucks forum with wheel fitments. Always check clearance before breaking the seal on the system, like you did.
The best video by this CZcamsr who doesn’t waste your time. Wish everyone posting a how to video would follow his lead. Thank you for your due diligence to not waste time. Keep up the good work. Truck and brakes look outstanding. ^5
Thanks man!
Just got some garbage reman calipers and now looking for an upgrade. This is perfect thanks!
Those same calipers will work on the earlier trucks as well. I've got a 2002, single cab, silverado, and they bolt right in, and do
significantly improve braking function.
Yessir good Ol GM keeping everything the same throughout the years lol
Hey bro i’ve seen your cars at work and you have some clean ass car and truck
No way where do you work? 😂 thanks tho!
@@C5Zach Texas instruments
@@adrianb7452 damn, small world lmao say what’s up next time
Great video, fixing to swap my the wife's brakes on her Escalade. Sub'd too
Thanks!
Truck looks good and that stance is perfect! What lowering kit do you have on there???
Thanks man! It’s a 3/5 bell tech drop
Wondering if this will work on a 13 with factory 18' wheels
Great job!
this should work on a 2011 Caddy Escalade ESV just the asme correct? same bolt pattern should be all that matters?
@@bad_at_accuracy_ yeah I don’t see why not!
Nice do you have a parts list?
Yessir just added everything to the description!
Where did you use the little washers? I see them in the parts list but didnt see it in the video
In between the knuckle and rotor. My fault shoulda added that! Think there’s a couple clips where you can see em though
What drop do you have on the truck bro?
3/5
Is the rear still drums? I’m trying to see if I can piece together the brackets to convert the rear brakes to rotors, so far I think I’ll have to make some brackets for mine
No sir I have a denali so thankfully I have discs from the factory haha
@@C5Zach o I didn’t realize the denalis had rotors, I’ll find some brackets off them , thanks
Did you have any issues with the brake master cylinder ?
Nope
I wonder if these would fit under some 17 inch rims. I got a 2011 gmc sierra running 17 inch methods wheels.
Think you need 18+
@@C5Zach Ya I think you are right. Damn I was hopeful
Did you do any sort of master cylinder upgrade or change?
No sir I don’t think it’d be necessary unless maybe I was cammed and pulling less vacuum
@@C5Zach gotcha just figured with the extra 2 pistons the stock MC would push enough fluid to get them to fully engage
Not necessary at all, but I wouldn't mind switching to a hydroboost my 2500hd brakes are effortless
@@doddgarger6806 not a bad idea. I’ve never drove one so don’t know the difference!
Just curious why not do the 6 piston caliper upgrade from a PPV model?
Because they cost way more lol
Weird question would this also work on a Silverado?
Yessir!
Does rock auto have slotted rotors for sle 11 sierra?
Not sure. I couldn’t find them
@c5zach what drop u have in your truck 2/4?
3/5 boss
@@C5Zach thx u looks clean
@@ericstrohl6988 appreciate it!
Question did you have to change the wheel studs or can you just run the oem ones?
You can just run oem. I only changed them bc I needed spacers for my wheels
What’s the minimum wheel size
Total cost please tryed to your parts list no luck
Under $500
@@C5Zach thks where do I look for your parts list please
@@PeterHatch-mx7zc in the description
@john52chesser40 little shop mfg makes a rear rotor conversion kit its super nice
The rear rotor size is the same for like, 20 years at 13". Even when the front rotors were 12" 99-06. No factory upgrade available unless you use the 99-06 2 piston calipers.
what oil pump u installed. seems too high
It’s the original lol not too high at all.
The stock caliper bracket worked for the new caliper?!
Yessir
@@C5Zach nice thanks!!
Just to clarify, the 4 piston calipers do NOT have a caliper bracket. It's one integrated caliper. Mounting points are one with the pistons. THe whole caliper and caliper bracket from the old one gets removed never to be reinstalled.
@@gzoman5 you’re correct! Thanks, I wasn’t thinking haha
does this setup work on 14-18 models?
I would hope so lol
What year is ur Denali. I have a 2011 Silverado LT. What brakes do u have in rear
2011. Disc
Stock or upgrade ??
So u use 2020 calipers and rotors right?
@@StacyRNix yes. It’s all in the video.
No it doesn’t. When I watch the video it said upgrades and u taking off front wheel
Would these fit a 2009 tahoe🤔🤔
Yes pretty sure it’s the same
@C5Zach awesome💪. What offset is your rims if you know by chance
@@NORCALPYRO_ not sure sorry
Caliper color is trash change it to anything else🤦♂️..smh use Spacers 🤦♂️
🤣 didn’t realize you own my truck clown
@@C5Zach of course I dont....color Is just trash 🗑
@@C5Zach you the clown grinding down the caliper
@@keepitthoro6768 😂😂😂
Spacers suck. Just no!
😂😂 there’s nothing wrong w hubcentric spacers