How to adjust a commercial door closure
Vložit
- čas přidán 23. 10. 2022
- Link for this door closure unit on amazon:
amzn.to/3QROHep
This video shows step by step instructions on how to adjust a commercial hydraulic door closure. The process is easy, just tighten or loosen the two adjustment screws. This is an easy DIY fix. This will adjust the seed that the door closes. This will adjust a door that isn't latching properly.
As an amazon affiliate member, we may receive compensation on qualifying purchases. - Jak na to + styl
You just helped me fix a slamming door problem I've had for the last few weeks. I appreciate it brother!!!!!
Right to the point, I like that. I work in maintenance for the local school district, I'm the plumber. However, they had us all take a class to fix these and crash bars about 3 years ago, haven't worked on one since... until today.. Thank you!
Excellent video, simply explained, saved me from my banging doors, i also passed on your expertise to neighbours and they were delighted, Thank you so much👍
Thank you! It's the best video for this problem. Right to the point! It works really good!
Fantastic advice, and explanation, I am awakened every morning,
a terrible slamming door
Which is just below my Appt. Where I sleep , I can’t imagine for any people who work a night shift ! Please adjust this is really a menace ,Sleep we now know ,is so important to long term Health , please take care of your Health, physical and Mental , Peace to all.
Good Job Man! Thanks for taking the time; it really helped to learn quickly how these work and how to adjust them.
Thanks for this. My apartment block has a hydraulic gate as the pedestrian entrance so of course about 3 people actually close it themselves. The rest let it slam home all the time, rocking the front half of the building. Think I'll not wait for the maintenance guy this time.
Thank you man for explaining in detail
This is exactly what I needed to know!
Thank you!
fantastic video thank you!!
Was that twice that you adjusted the latching speed? At the end of the video, it was a lot softer than when you were outside of the building that few seconds before.
Thank you for this video. My roommate is in an abusive relationship and he and his chick are always wasted and slamming all the doors around. Now at least they can't slam the front entrance door cuz I got that L(last 10%) hydraulic set tighter than a pickle jar.
Does the door need to be open when adjusting, because I adjusted both screws Full Tilt with the door closed and it did nothing
If the door closer becomes disconnected in the middle, should the door still be lined up perfectly in the frame? There’s a door at a local business that was recently replaced. The closer became disconnected in the middle, but the door also didn’t line up properly when attempting to manually close it.
What tool do you need to make the adjustments for the door closer
I need the magnetic latch. Where to find one just like yours?!?!
How about if you want to adjust it because its hard to open.
Thanks boss
Where else?
How do you adjust the opening pressure? Ours blows open in the wind
Opposite end of the 2 screws shown. Should be a screw to increase that pressure
I’ll try that
It’s not a door closure!
It’s a door closer.
Totally neglected the back check adjustment.
Excellent. Thanks!
You forgot spring tension. Tell everyone how to decrease the amount of force needed to push the door open.
How do u adjust that