I have the same steering shaft kit in my 71' Chevelle. Does your coupler go over both sets of splines on the gear box input shaft or just the first set? Looks like I would have to grind off the nipple at the end of the steering gear box input shaft to get it to seat on both spline sections.
In auto zone I was just asked the same question. Who makes it. Ugh, so sad. I was sure to bring the car by there to show the employees, that's right 2 of them had no idea, but hopefully now they'll remember what s chevelle is.
Lol that’s what happens when I’m not there at Autozone 😂 jk but Autozone wants to start them young with no car knowledge so give them a chance 😅 all love to your channel though ❤
Honestly on ls it's the easiest way. You can pressurized the system but you have to spin the crank over to prime the oil pump so unhooking the coil harness and cranking is the easiest
To work in a auto part store that sells auto parts you need to know cars. Mininum requirements of the job.go work at mcdonalds if you dont know cars.😂😂😂😂
Huge congrats man, can't wait to see this all wrapped up.
Congrats Dude. Nice to see this frame off resto mod come to fruition. May not mean much but proud of your work my man.
All that beautiful stuff and then i see a 4l60e hope its built good lol thats a bad ass car tho
Sounds great man
nice work man!! real build!!
Congrats on the first start up! It's always nerve racking the first time!
Dude my build still feels nerve racking starting it. Anything you’ve seen the insides in I feel is nerve racking
Good job buddy! Merry Christmas ! Oh and if y’all don’t know how awesome open headers sound , your missing something in your life 😉 Great Job G!
I have the same steering shaft kit in my 71' Chevelle. Does your coupler go over both sets of splines on the gear box input shaft or just the first set? Looks like I would have to grind off the nipple at the end of the steering gear box input shaft to get it to seat on both spline sections.
In auto zone I was just asked the same question. Who makes it. Ugh, so sad. I was sure to bring the car by there to show the employees, that's right 2 of them had no idea, but hopefully now they'll remember what s chevelle is.
Hey …what product is that (orange/blue) on the Ac and heater hoses…looks so awesome ??
Hello Goose, where can I get my ECU around your area? Any info would be greatly apprciated. Thanks.
#KEEPGOING MY GUY 🫡 FROM LOUISVILLE KENTUCKY
Where at? Jtown here
I know what’s wrong with it, it ain’t got no gas in it 😂😂
I'm on my build and looking for an engine. Who built the engine? Appreciate any advice.
Lol that’s what happens when I’m not there at Autozone 😂 jk but Autozone wants to start them young with no car knowledge so give them a chance 😅 all love to your channel though ❤
I did the same thing (smh) Fuel pressure regulator went out not long after that.
Do you prime all your motors with the starter?
Honestly on ls it's the easiest way. You can pressurized the system but you have to spin the crank over to prime the oil pump so unhooking the coil harness and cranking is the easiest
علي موحان💛❣❣💛😘💛😘💛❤💛💗💗💛👏👍👏💗💛💗💛💗💛💗💛💗💗💛👏👍👏💗💛❤💛😘😘💛😘💛😘💛😘💛😘😘💛😘💛😘💛😘💛😘💛😘😘💛😘💛😘💛
A LS3 isn't bad, but a 632 looks better underneath the hood of a chevelle. 😆
To work in a auto part store that sells auto parts you need to know cars. Mininum requirements of the job.go work at mcdonalds if you dont know cars.😂😂😂😂
Yo my friend,,, where did u get those red n blue, water lines??? Need them for my Monte,,,, great video as usual