2016 Dodge charger dashboard cover removal n replace
Vložit
- čas přidán 7. 09. 2024
- This video is about 2016 charger dashboard cover removal n replace... you do not have to remove the windshield nor do you have to remove the complete dash assembly... this is about an 8/9hr task so do not let this frustrate you take your time...
tools you need for the task:
Short and long Phillips screwdriver
Short flathead screwdriver
7mm 1/4 drive socket
6.5mm 1/4 drive socket
Panel popper or plastic push pin tool
Written instructions:
1. Find all the screws to loosen the dash
2. Remove the top dash speaker grill ( (3) 7mm none Phillips head screws)
3. (4) 13mm steering column screws to drop the wheel down
4. After locating all necessary screws you should have the glove box unmounted, after that is done look straight up and remove the (2) airbag 10mm screws that’s connected to the dash frame once done so the dash cover should come straight up
5. You might have some troubles with dash going back on the air ducts but if so install the smaller rounder defrost ducts go on first then the dashboard cover slides right on top then you start the mounting process with getting everything assembled.
6. If you have any questions about this procedure plz feel free to drop a message or comment about this...
Thanks man really needed this!
Your welcome
A trick : you can watch series on Kaldrostream. Been using them for watching loads of movies recently.
@Diego Philip yea, have been watching on Kaldrostream for since november myself :D
@Diego Philip yea, I have been using kaldroStream for years myself :)
Thanks for video bro made it easy 🫡🔥🤟🏼
Hi there, I had a question maybe you could help me with. I don’t mean to bother, I just replaced my dash and all airbags beside steering wheel and side curtains. Can I re use my impact crash sensors if they don’t appear damaged or shall I order new ones? Worried when I give car power again that air bags might blow
Yes u can reuse them
Took the whole dashboard out and reinstalled now I’m not getting power and all connectors are plugged in
do you think any of the plastic trim can be removed if i got the premium dash? i dont know how its attached, im not trying to loosen the leather or something
Yes it can
Do you have to do anything extra to replace the airbag as well like reset the computer or any sensors that were damaged ?
no, only if your airbag module is bad which rarely goes out but anyway long as you replace the system with new bags that are compatible you should have no issues and the AB light should go off its-self once the system knows there's no open circuit (complete)
How did u get the bolts by the windshield without removing window
sorry for the late reply, one you remove the speaker grille/panel you can access the screws up top
RONN INA HELLCAT thanks man I just finished removal
Do you know if that dash of a 2014 would fit on a 2016 or they change ? TIA
yes it'll fit. sorry for the late reply
Thanks for the video man
but i have 2 questions
1- cant we just replace the cover ? is there anyway for that ?
2- where i can find the replacement dashboard ? i cant seems to know the name of it , if you have a link i'll appreciate it
Sorry for the late response but it’s just called a dash cover to my knowledge, the dealer will it if u call , i hour this info helps
@@ronninahellcat3182 where did you get dash cover and how much was it
💪🏾
How long did it take you to,replace this.. If I got a cover for mine can you replace mine..
It took about 3-4 hrs but I’m back over the road in trucks now so i won’t be able to
where did you get dash cover and how did it cost?
@@ivans7068 from @ Clevelandpowerandperformance
$350
@@ronninahellcat3182 i just called they said $1000 DAMMMMNNNNN LOL
Did you disconnect your battery prior to removal?
Yes I disconnected the positive post, i thought i mentioned it my apologies
@@ronninahellcat3182 you have any social media accounts I have more questions
So the air ducts need to come out with dash
They don’t have to.. sometimes they come out with the dash
Well I have all bolts out and the dash wiggles but won't come out for some reason