The Easiest Way to Terminate & Crimp a CAT5e or CAT6 Ethernet Cable

DynamicTech Guides presents the easiest way to terminate a CAT5e or CAT6 ethernet cable. This guide will teach even the most nervous beginners on a fail-safe method to crimp and terminate CAT cable. You may need to repair a damaged cable, terminate an end for a security camera, or get a RJ45 wall jack working.
Klein Tools Crimper: amzn.to/3C9fefi
Side Cutters: amzn.to/3rq1BCB
Klein Tools CAT6 Pass-Thru Connectors: amzn.to/3dCGslm
Fluke Network Certifier: amzn.to/3DRHDI2
CAT6 Cable: amzn.to/3BGWwuh
RJ45 T-568B Wiring Diagram:
support.adder.com/tiki/tiki-d...
DISCLAIMER
The information provided by the speaker / presenter and DynamicTech Guides on this platform is for general information and educational purposes only. All information is provided in good faith, however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, or completeness of this information. We take no responsibility or liability for property damage, personal damaged, or injury / death. Please consult and follow all local building code.
#ethernetcable
#networking
#technology
#tech

[@fizzz35]

This was the most clear how to guide on how to terminate a cable I've ever seen. 10/10 easy and straightforward to understand and excellent pacing. Needs more views.

[@TheRevRobWilson]

question, if you have say a 100 foot cable, how do you make sure both ends are correct?

[@Naomi-ql4ug]

Thanks, I subbed.

[@4ehano]

You can use the outer jacket sheathing that you remove in the initial step to "untwist" the twisted pair by separating the cut end just a little, then using the sheathing, place on one of the wires from the pair and move it down the pair and it will untwist.

[@sr6894]

Push cable in as far as you can. IT 101

[@dynamictechguides3046]

Yup. I mentioned that in the vid, no?

[@tomh5529]

OMG - Talked too much.

[@dynamictechguides3046]

Oh really? Sorry mate, wanted to be as clear as possible.

[@MrKen-wy5dk]

@@dynamictechguides3046 Most videos talk too little and skip little steps and hints. Yours is the best by far and you included a link to a quality pinout printout. Five Stars.