12 x 14 Contemporary Gazebo Helpful Hints
Vložit
- čas přidán 3. 07. 2024
- About This Gazebo
Add a striking piece of modern design to your backyard with the 12 x 14 Contemporary Gazebo.
It creates an ideal space for dining, entertaining, or adding a stunning center piece to your yard. Sturdy, 7″ x 7″posts with premium black plinths offer plenty of stability and structural integrity. The black steel trusses provide much greater structural integrity than wood. The welded ladder design delivers a more contemporary and airier aesthetic, all while providing a strength and stiffness that can endure high winds and tough weather.
The exterior grade cedar will stand up to the elements and look great for years to come. You can feel good knowing this gazebo is built with 100% FSC Certified Cedar, which means it comes from sources employing sustainable forestry practices.
The graphite gray aluminum roof shields everyone below from the sun and the rain and it has an appealing sloped design that provides excellent water drainage. Stained in an attractive mocha brown color, all wood sections are pre-cut and pre-drilled for easier assembly. The Gazebo comes with simple to follow illustrated instructions and Yardistry has created a helpful hints video to make your installation process easier, as well.
If you need an outdoor gazebo that truly stands out and delivers a higher level of modernism, the 12 x 14 Contemporary Gazebo will be the perfect addition to your outdoor living space.
0:00 - Intro
0:21 - Step 1
0:57 - Step 2
2:10 - Step 3
4:16 - Step 4
7:35 - Step 5
7:48 - Step 6
Learn More at: yardistrystructures.com/12-x-... - Jak na to + styl
Just put this together this weekend. Quite a pain. I've been in the trades for years and can build or fix just about anything and I will tell you that the lack of QC in their wood and cuts made this a real pain.
The long rafter boards were so warped it was impossible to get any of the edges of the metal roof panels to be flush on the sides. I had several rafters that looked like a stretched out "S". I wish I could attach pictures to this.
Also the instructions state to leave a 1" overhang off the bottom and have the top be flush. Good luck with that. The wood frame is simply too long, or the metal roof panel is too short to do that. Has nothing to do with squaring the panel either. With 1" of metal hanging over the bottom there was about 3/8" if exposed wood on the top fascia. There's just no way around it, you would have to either shorten the rafter boards or rip a little off the fascia boards, period.
The instructions leave a lot to be desired, and why they decided to leave the part number out of each step is beyond me. You'll have to reference the parts list at least 50 times as you go through the steps to figure out which bag to use for each step. The manufacturer could fix this in about 30 minutes and update their instructions and save lots of people lots of time. So frustrating.
The video helped but was still lacking in clarity on some things. Overall I like the structure but better quality wood and better quality control on lumber and better accuracy on cuts so things actually fit like the video says they should would be wonderful.
If I can make any suggestions to this. I just put this togeather with my son over the weekend. It took two people 15 hours total to put this togeather so about 30 man hours. This is a major structure and will require 2 people at MIN and an extra thrid person to help when putting the steel frame up for 10 minutes to jsut hold a few things and when putting the roofing panels up for 10 minutes. You can do it with 2 people like we did but it was sketchy at points and we are both strong and fit people that can lift a fair amount of weight!
To the manufacturer, you put all these nice part numbers on all the bags for hardware then you didnt use them in the instructions. It would be really nice to use these part nubmers for the hardware "use a 5/16 x1/4 Big Washer (311)" adding the 311 really helps so that you know you are using the right ones. You did a great job to make sure nothing was called the same thing but the part nubmers make it fool proof :) Tip for people is instead of going back and forth remove the inventory page and tape it to your work table for refrence to look up the part nubmer!
1. Don't lay your wood in the sun, cover it with a tarp even though it's cedar and meant to be outside if the wood is still a bit wet it can warp very easily as it dries.
2. The 3 little tubes of sealant are just not enugh and are a pain to use. Spend $5 and get a tube of clear silicone from the local hardware store. It's easier to apply it an there is no need to be so worried about running out with those 3 small tubes that are really hard to apply with. Now Dont go overboard so that it squezes out everywhere but you also dont ahve to be so strigent! I also put a small dab of clear silicone on each screw hole to ensure it does not leak even a little. It's a little overboard i know but its $5 woth of silicone and if you have a helper hit all the holes as you screw it's really no time at all!
3. Get a rattle can of black rustolium matt black paint and spray ANY scratches you see in the metal. Just hit it once or twice to stop it from rusting!
4. When creating your roofing frame members (putting the long and skinny piece togeather) you dont ahve to do it on a level surface if you have a nice long straight edge (I had an 8 foot level) you jsut lay the boards on their side and put the 2 bolts in and throw the level across the top of it to ensure its flush and level as possible. Makes it easier to do this on a non level surface then trying to fins a perfectly level surface.
5. MAKE SURE any outside board in your roofing frame has a t nut on the OUTSIDE of it. The instructions show it but it does not show it well. The reason is all the outside edges will have trim put on them so they have to be flat and any of the inside edges will be butted up against another roofing panel so it has to be flat. Make sure the otside of each roof panel does NOT have a nut or bolt sticking out. You do not want to find this error out when installing the trim!!!
6. Your 3 roofing pannels, after building the framing put your 5 strapping pieces into it and put two screws in the middle of each board first. This allows your frame to still be adjusted for square. Once you are square put 2 screws in each corner and check again. Then you can do the rest of the edge screws, check for square again and then fill in the rest and again check for square. We found that if you put it in square then add your straping piece it can easily get thrown out of square! There is no limit to how many times you can make sure it is square. Alos it does not have to be perfect 1/8"-1/4" over 155 inches (12 feet) is fine but try to get it as close as possible but don't drive yourself nuts tryping to make it perfect! If its out of square, on th elong measurement corners have someone hold the corner and just give it a little kick and measure again!
7. If you actually know which way your weather is coming from based on where you're going to put this, you can overlap the sheets the other way to help prevent weather from coming in. It takes a few seconds to just put panel A on then panel B. then panel a then panel B. But basically you're doing the same thing. the overlaps are just going the other way.
8. Also the roofing framing will not always be true prefect rectangles some will bow out.. so try your best to center them. Also when putting on the roof clips the instructions are not very clear how they work. Might be nice to update how these work better. This vidoe exaplined it very nicely. The clips are universal but to be universal to either side you ahve to install them the opposite way on the right side VS the left side which was confusing!
9. For the roofing clips and all the plastic the gets caught in the pinch of the folded metal, There is no need to pull it out or make it perfect, just leave it as it wont be visable once you slide a cap over it!
10 After all the roofing clips are installed take one of the roofing caps and just run it up your roofing panel clip to make sure none of the roofing screws are sticking up too far and will prevent it from sliding up. If you find this out when it is installed on the roof it will be very difficult to get on the roof to screw in any screws so that the cap can slide up unubstructed! Ask em how i know, we had one screw that was sticking up just a little too far :)
11. When sliding the roofing caps that finishes the seam between the roofing panels the leading edge of that little section that is used to join the two roofing caps togeather can get stuck on the over hang where the roofing shsets overlap. I found a light tap with a hammer on the very end of the roofing cap helped it to get over this little lip.
12. There are going to be holes that you have a hole in the top panel but not the bottom panel. These are self taping roofing screws just press down and it will tap the bottom panel!
13. When we installed our pannels we installed the left one first and insted of putting it in its final resting place we set it down with the post in the second joist bay, then we installed the right one the same way then we installed the middle panel. This made it a lot easier to get all 3 pannels up there with no issues. You milage may vary but we found this easier to do small movements with all 3 pannels up there then trying to get each one prefectly into place and the last one was difficult to put in place!
14. Your last panel will be a tight fit. If you are having issues the video shows it a bit but really does nto explain it. push up both roofing panels at the same time and flush them up then let them sit back down again. It will wedge the roofing panels but it will fit.
15. After you put the bolts in to join all the roofing panels togeather do not tighten them yet leave them all loose and then go back after and tighten them all down.
16.Before you screw your roofing panels togeather you need to flush up your panels. If one is higher then the other then put a screw in the lower one and leave the head of the screw sticking up and use a claw hammer to bring the two surfaces level and then drive in a screw. This will make sure all your roofing panels are flush to each other! Example of the procedure (czcams.com/users/shortswZ6QWaCY6cY) Very easy to do and I know no one wants to put a hole in their nice new building but it's worth it.. Also make sure you dont pull too hard and mar up your nice new soft wood, You can put a chunk of wood under it to help distribute the force to not mar the wood!
17.. By design this Gazebo is meant to have the tall part of the roof be the front and the lower part of the roof is the back but I find it works both ways. We installed ours backwords because we wanted the water runoff to be away from the house!
18.. When installing the facia metal DO NOT over tighten the screws and make sure they go in flat, if you are using a power drill set it to the lowest clutch setting as you can dent this metal so quickly by over tightening.
19. Do not use an impact driver to install the facia screws use a normal drill driver. An impact as it hammers can cause the bit to cam out (jump out) of the screw head and you will dent that flashing really bad with your drill bit!
Good advices. Thank you!
Also I got an eves trough for my system. I put some drip edge under the metal roofing and left it hanging out thickness of a finger from flashing. I got some white PVC gutters from Home Depot and spray painted it black. About $100 CDN it total costs but looks great and water can be managed.
I am looking for anyone that got shade rollers for the sides as I can't seem to find any curious what others have used!
I ended up finding shade rollers at Home Depot for $125 that were 10 feet long for the sides.. Perfect for blocking the sun and they are 8 feet high so perfect fit for the sides. It does create a triangle that can't be covered but I don't think there is any other way to do it!
We built it today and couldn’t have done it without this video. Thank you!!!
How long did it take from unboxing and unwrapping all the pieces to completion and how many people?
Honestly, it was just my wife and I it took us an entire weekend. The most difficult part was making sure the roof panels were squared and putting them on. This video helped a lot as the instructions were not so clear
Thanks for the tips video. 3 of us are starting this tomorrow morning…. Unless we have some weather come in. In Northern Idaho weather changes 3 to 4 rimes a day. lol. I’ll update the progress of the build and pass along an info that might help the next construction DiY’er.
You’re so lucky. I’m doing it by myself and it is not easy with one person
Doing it in Meridian, ID and yeah it’s windy today. Not ideal 😂 when I started two days ago it was 92 degrees and I was dying. Hope your installation went well.
The instructions were tedious but if you followed them exactly everything kinda worked out, but…
The cedar framing for the roof had many bowed pieces, which caused problems with the metal roof alignment if the bowing was on the outside - which it did!
The biggest problem is they make it look so easy to get the roof sections on top of the trusses - it is VERY hard to get them over the posts and into position -> you really need 6 people and 4 ladders to do this safely.
If I had to do it all over again, I would not get this gazebo unless you had 6 people available. Likewise, it just seems like the roofing assembly could have been easier and better. Most of all - it seems like the whole structure was engineered to fit in the Costco sized boxes. If they had made the roofing support wood longer and the roofing sheets larger, the roof could have been assembled onto the trusses in 1/4 time rather than they way it is shown.
Love the yardistry gazebo.
Get the ZeboZAP to strap a tv on the yardistry post without drilling and invading he structure integrity of the yardistry gazebo.
ZeBoZAP work great with the yardistry gazebo. Ordered and delivered next day. Installed in 20 minutes. Just strapped it and looks super safe.
What are the recommended screws and sleeves for mounting this on an acrylic deck?
Hi,
I am installing this on the deck. Do i need additional support underneath the deck?
Theres 2x8 bracing underneath the top deck floor . The interval of the 2x8 is around a foot.
We recommend checking with your region on any structural requirements.
If I wanted to leave one back truss and one right side truss off, is this possible? I am hoping to semi-enclose by building 2 walls.
We do not recommend not installing all the trusses. The Yardistry Privacy wall is designed to fit with the trusses still installed.
What’s a good sealer for the wood 🪵
Can the front truss not be attached and still maintain structural integrity? Or does the roof rest on the front truss too? Would like to have this completely next to the existing house so that the door could open underneath the front truss.
All trusses need to be assembled as per instructions.
@@YardistryStructuresCan you add base underneath each post to make the whole thing taller?
@@AlexKazakovaxkazakov We would not recommend that.
I agree, debating on building this but no feedback or reviews online.
You can see reviews for the Contemporary Gazebo at Costco www.costco.com/yardistry-12'-x-14'-contemporary-gazebo-with-aluminum-roof.product.4000043975.html
I just finished building this earlier today. A big tip. When you’re installing the edging on the roof panels make sure they are as flush as you can get them. This will make it easier when you sliding one the roof caps. I would put the caps one before tightening down the roofs. Other than that it was a pretty easy build. Definitely will need help when lifting the roof panels on top.
Hello,
What are the recommended fasteners when anchoring into cement?
It will vary depending on your regions requirements and what you are anchoring into.
Installing this next week. Is there a privacy fence that I can purchase that's compatible with it?
At this time we do not have a compatible Privacy wall for this structure.
Just add a curtain rod with some white semisheer curtains for less then $100.00. This is what I plan to do.
Can anyone comment on how these hold up to weather (this model or similar)? I have a galvanized steel / powder coated gazebo from another manufacturer and it has faded and rusted. Would like to understand longevity if I get this one. Thanks!
This is all ceder so as long as you wash it and seal it each year you should be fine. The metal is like real strong metal (my son and I were doing pull ups on the middle beam, this is not your crappy HomeDepot Gazebo with that thin powder coating on the metal. Its thick metal and thick powder coating!
@@steve_main Thanks for the reply!
@@projectguyprojectguy9019 NP I just installed mine yesterday. Costco had them on for 2000 CDN for this weekend only. Amazing deal!!
What is the wind rating if properly moubted to a concrete slab?
The Contemporary Gazebo is rated for 65mph if properly anchored.
Is it possible to install it on the tamper of the Deck?
We suggest checking with your region on local building and city codes, ordinances, neighborhood covenants regarding this type of structure for guidance on acceptable installation requirements..
We ordered ours from Costco. I plan on using these handy videos .
Can anything be applied to the post to prevent weathering ?
I’d like to know this also. Just picked up ours today
We recommend applying a water sealant on a yearly basis to help maintain the wood.
@@YardistryStructuresthank you.
@@YardistryStructureswould boiled linseed oil be ok ?
@@jamesandrewband We do not recommend a boiled linseed.
What is the overall weight of this contemporary gazebo?
This Gazebo weighs 760 lbs
Do u have to bolt down all the posts to the ground?
We do recommend that the structures are anchored.
@YardistryStructures Thank you so very much
You think it’ll be safe to anchor the gazebo into pavers?
It is critically important you start with square, solid and level surface. We also recommend checking with your region on any requirements.
Did you anchor it to pavers? I haven't installed mine and I have pavers. I've found anchors that are 10 and 12 inches but I'm not sure if I should take off pavers at the posts and add cement and then anchor it to that
@@187sniper I have pavers too 2x2 foot. What did you end up doing?
We live in an area where in the winter we get snow. What is the roof weight rating (i.e., how much snow can it support)? When assembled, how heavy is this gazebo? Thanks.
This Gazebo weighs approximately 760 lbs and has been tested for 36 lbs per sq ft of snow load.
Why is this model not shown on your website, yet it is currently being sold at Costco? Is this a discontinued item (#2127608) and Costco is simply selling off "old" stock?
You can find this under Costco Exclusives on the Yardistry website. This was a new design in 2023 however it is exclusive to Costco.
Will there be a mesh kit available?
Yes a Mosquito Mesh kit is coming soon
@@YardistryStructures I would be interested in knowing the answer to this as well, as this will help narrow our choices.
@@williamcurley9609 Yes the Mosquito Mesh Kit will be available later this Spring/ Summer.
How about curtains?
@@shama-elsidahmed3029 Yardistry does not have any curtains, we do have a new Roller Shade available.
How long does it take to finish assembling?
We recommend 2 -4 people 12 -16 hours
I did it alone in 5 hours 😅
@@joserivera-pr4gm did you really
@@ed00001 it was a rough one ☝️
Un vidéo en Français?
no comments yet? really? i just saw this today
Obama is a Muslim
Please make better written directions with clear pictures. So frustrating
Your assembly steps are incomplete, you failed to show or even assemble the roof eave supports and you also failed to indicate that when screwing on the roof panels, the screw holes in the middle line that assembles all 4 panels do not match hole by hole. Is that the reason you guys included a 1/8 Drill Bit to drill out the holes on the panels for that section? Bad instructions.
Were you able to line up the holes? We're stuck on this step
This is a Helpful Hints video not a Step by Step Installation video. We are only showing the more difficult parts of assembly.
@@YardistryStructureswhat a terrible response. Your video and manual INSTRUCTIONS missed the very crucial step of using the drill bit (which is included) to create holes for the middle roof panel installation. What a joke.
You say it’s not a step by step video, yet it literally says step 1,2 ,3 in each section of the video.
@@MrGodzassassin exactly! I watched the video multiple times, went to costco to see the setup a couple times and read the instructions as best as I could.