How to Replace Spark Plugs Mercedes Benz GLA 250 2014-2020 | Sizes and Torque Specs Included!

This is exactly how to replace the spark plugs for a Mercedes Benz GLA 250 2014-2020! The dealer wants something like 500 bucks to replace the plugs on this car. I'm going to show you how to get around that and make sure the job is done correctly! If you have any questions please leave them below and I will do my very best to get to them. Thank you so much for watching and have a great day!
14MM Spark Plug Socket: amzn.to/3VozAuI
Spark Plugs x4: amzn.to/3yHyNwh
Dielectric Grease: amzn.to/4aHBpaz
Torque Wrench: amzn.to/4bBbUsK
Hose Clamps: amzn.to/4e6ySti
Instagram: / 2carpros
If you have a car question ask it completely free at www.2carpros.c...
*Disclaimer: Please use all safety precautions

[@georgerousakis8501]

Hello, Giorgos engineer from Corinth, I am very impressed by the amount that Mercedes wants to change the spark plugs.
I have done the exact same job on the same customer car. her specific spark plug NGK It's 17€ Here.I got him everything together with work : 120€.!!!!!!.
Nice job, well done. In the tube you cut, I put a heat shrink on top, like that for beauty. Good morning, always be well, keep this enthusiasm. That's all.

[@livewellandfree]

One suggestion: Vacuum the sparkplug wells to remove grit that wasn't removed with the air gun. Grit frim the side of the well gets dislodged when removing the plugs and prevents a good seal. I used a long-neck plastic funnel attached to the vacuum to reach the bottom.
Also, it you use WD-40 you will need to CAREFULLY use a Qtip and a hemostat to remove the grit the vacuum doesn't get. Don't get any into the threads or you will have a difficult time achieving the correct torque. I had to use a clean Qtip to clean the threads and didn't use any WD-40 on the remaining three plugs - just tapped the ratchet several times with the handle of a hammer.

[@livewellandfree]

One more thing: A large plastic straw works well for getting the grit out before removing the plug. Simply slide it down to the bottom, past the lugs, and then use the airgun. If you can find an extended nozzle, even better.

[@YogiUnde]

Thank you for doing it. You're awesome!

[@outsidethelines2162]

Loving the new camera my man!

[@TBguitar]

would this be the same procedure for my 2016 CLA 250?

[@2carpros]

Yep! From 2014 to 2020 this covers! Thanks for watching!

[@danlopez2012]

Watched the f150 rear diff refill vid👍 if i may ask; If the Tags are rusted and unreadable how do i know which inch is in there its a 4wd 08 xlt 5.4 triton 60th Anv edition🙄 Even the manual doesn’t specify. W/o the tags i think im S.O.L.😔