👍The best way to hold your embroidery or cross stitch hoop & frame!👍 Elbesse versatile table clamp
Vložit
- čas přidán 7. 08. 2016
- A video demonstration of the frame clamp (the Elbesse versatile table clamp) that I use in these hand embroidery videos. Perfect for holding your embroidery ring frame, stretcher bars or cross stitch frame while you work in comfort, it can be purchased here:
www.sarahhomfray.com/myshop/p...
Sign up for my monthly e-mail Newsletter: www.sarahhomfray.com/newslette...
Visit www.sarahhomfray.com for your hand embroidery supplies.
Hand embroidery for beginners and experts!
#SarahHomfrayEmbroidery #SarahHomfrayStitchLibrary #SarahHomfrayNeedlepoint #SarahHomfrayGoldwork #SarahHomfrayBlackwork
#EmbroideryForBeginners #BeginnersEmbroidery #HandEmbroideryForBeginners - Jak na to + styl
Just a tip. If you do not have a table with the sort of edge, Sarah indicated, you can attach your embroidery clamp to a board that is wide enough to sit on your table at least 6 inches or so and also stick out over your table edge. Have the board be long enough that it sticks out to the right and left a foot or two along the table. Then you can clamp the whole board to your table with any ordinary wood type clamp. (By having the board stick out to the right and left of where your embroidery hoop is clamped, you will leave enough room to attach the board to the table without the wood clamps getting in your way.) Hope that makes sense. Basically, attach clamp to board that fits. Attach board to table.
I've been searching for a table clamp but haven't seen any that I like until I found this video. Thank you so much!!!
Thank you Sarah, beautifully demonstrated ❤
Oh my goodness this clamp does make things easier! Arrived quickly, thanks very much, Sue
It will change (your stitching) life Sue!
Finally getting my table clamp! I've been struggling with shoulder and elbow pain making the embroidery part of my plush sewing a nightmare : ( I made some money through gaming in the mistplay app so I can finally splurge and get my clamp and some other things! I'm really fond of the stretcher bars.
I was wondering if this was something that was worth purchasing, and so I'm glad I found your video - I will definitely be buying this!
I use mine all the time!
me too, Sarah - your wooden holder is much simpler and easy to use with a table-
Thank you 😊
I just received mine! I love it! Wonderful design! Joy! Thank you!!!!! 😊
Received this morning! Many thanks for such brilliant service 😊
Just orderd it after watching your video. thank you Sarah 😊 💓
What a nifty tool 🙏🏽👍🏽🙋🏻♀️
H i Sarah
Just received my embroidery hoop that attaches to the table and I love it! it is so much more relaxing and enjoyable. And I havent pricked my finger even once, Anyway love this product, oh and it came in the mail Really fast which was nice. Thank you!
They are great Shannon, you will wonder how you ever managed without one! Glad it arrived quickly x
@@SarahHomfrayEmbroidery Hi Sarah,
Was wondering if you do tutorials on Brazillian Rose's, I'm having a heck of a time getting them to look right. Anyway was just wondering.🙂
Very useful vedio.. Thank you sis ❤️❤️
Thank you Sarah. Have placed my order today 😊
It's on its way to you Anne!
Got to get me one of these. Thank you.
I’m so excited about this 💪🏼⭐️👏🏼 I’ve messaged you via your website a little while ago and cannot wait to order. 👌🏼🙏🏼 Right now though, it’s bedtime in Australia! 🇦🇺 😴🥱 I really have to stop watching your videos and sleep! 😂
I've sent you an email Megan, I hope it's of help! x
Thank you : )
Thank you
I’m from the United States and was wondering if the shipping is high on orders. I love watching your videos. I have been getting into hand embroidery lately.
I am interested in the seat frame version, which has the same kind of clamp....
I love a hoop and both hands free but have no access to a table. Open to suggestions. I wonder if this will clip onto a lamp stand.
You can buy seat frames and floor stands for them Elaine.
@@SarahHomfrayEmbroidery thank you for your reply Sarah. I really appreciate you.
You could perhaps clamp it to one of those "over the bed/knees" type of table? Like you see in hospitals.
Thank you very much for your beautiful videos
Sorry for a silly question , will hand embroidery and using this clamp work with leather? What kind of needle would I require to embroidery on leather?
You can buy specific needles for leather, funnily enough they are called "leather needles". The tend to be thicker and have a sharper, triangular point that enable the needle to pass through the hide.
Do you send to Wales 🏴 in UK 🇬🇧?
Can you buy just the barrel clamp part?
I already have the other bit.
Hello Sarah, how can I buy this in Pakistan?
Even though the embroidery hoop can be held with one hand, would you recommend this frame for punch needle since it requires constant pressure on the fabric?
Is there any alternative model that doesn’t require attaching it on a table? I like to work on a couch:)
Thank you in advance!
I've not done punch needle Helena so I can't answer your question about this specifically, but I do use two frames in my videos to keep the embroidery extra steady. You can buy other attachments if you prefer different sitting positions, I suggest a seat frame or floor stand
I so love watching you and absorbing all that you do. I love your set up but I find that I can't sit at a table or desk due to neck and shoulder issues and need to sit in an arm chair for a bit more neck support do you have any suggestions on a good set up for sitting this way as I currently use a hoop and hold it but really need to find a better way. I've been researching and looking but yet to try anything yet. thanks
I think you need some sort of floor stand Lesley with a moveable arm on it you can clamp your frame to. I can't think of where to get one immediately but maybe our online community can help, I've put up a question on the community page so keep your eye on that!
@@SarahHomfrayEmbroidery Thanks for that Sarah I had a feeling that might be the case, they are so expensive so I think I have a holiday project for hubby coming up lol
I've seen you use a frame that is held on with what looks like tacks. How do you do that? Why do you do it that way? And is that kind of frame readily available or easily made?
Video on that here Frances:
czcams.com/video/-M2YnDUx5KQ/video.html
Frames are available in our shop here:
www.sarahhomfray.com/myshop/cat_264747-Embroidery-Equipment.html
Will this hold Qsnap frames? Also please could you tell me what size frame would be the largest that it could hold without being unstable? 😘😊🤗
The jaws of the table clamp open up to 3.5cm (inch and a half) so they should hold a Qsnap frame fine (see the website item description for all the measurements of the table clamp and please check the barrel will fit your table : www.sarahhomfray.com/myshop/prod_4538062-Versatile-table-clamp.html). I recommend in the item description that you use one clamp for frames up to about 30cm (12inches) and two for frames over this size. I use two clamps on the video for extra stability when filming.
Will this fit 16 and 24 mm thick frames?
I have a question please,when you start your actual sewing on your project do you start stitching on the top , middle or bottom of your design ? Example when painting you start at top so your hand doesn’t mix your paint colors.
It's more about back to front than top to bottom Fludrby! It does depend on what technique you are working but if you have a layered design (with design elements on top of other elements) then start with the elements that are behind first and work your way to what's on top. This will give you the neatest edges as you aren't squeezing things in.
Order the elbesse clamp
This is an Elbesse clamp
Thanks for the video. Where can I buy this clamp.
You're welcome Noor. It can be purchased here:
www.sarahhomfray.com/myshop/prod_4538062-Versatile-table-clamp.html
i would love that! website link is not working
The link is now fixed. Thank you so much for letting us know!
My frame size16"ring.this clamp for suitable?
This size frame sounds like a quilting hoop so you might need two clamps...
Hello Sarah, is it difficult to stitch with one hand above and one hand below the hoops ? Which one above ? Waht about precision ? What embroidery technique can be used with this type of embroidery loom ? Thanks in advance for your answer
It takes practice but is much faster when you get used to it, I use my dominant hand underneath as that is the one I have most control with
@@SarahHomfrayEmbroidery 🤗 MERCI !
Can it hold a q snap ?
The Q snap frames are plastic Beverley? I also notice that they have a round cross section; they will fit in the table clamp yes, you may have to just wrap something around the frame to make sure it doesn't slip (as its shiny and round!)
Are you able to send to Texas , how to buy
Yes, we ship worldwide and to the US every day! Visit the website here to buy:
www.sarahhomfray.com/myshop/prod_4538062-Versatile-table-clamp.html. Add the item to the basket, select your country from the drop down list and postage prices will be displayed before you commit to buy.
I hate to do this here, but I’m having trouble with my order and your website.
There is a contact page on my website Veda, send me a message there and tell me what the problem is and I will help you👍
I placed my order on 11-11-22 I have never received my border please follow up
I haven't received an order from you Barbara, but I've found an uncompleted order in the 'abandoned basket' for you so I have sent you an email
Hi Good morning mam...I want versatile table clamp...what are the sizes available...and how much amount of Indian currency...reply soon mam...
You can buy the clamp from our website here:
www.sarahhomfray.com/myshop/prod_4538062-Versatile-table-clamp.html
Measurements of the clamp are on the listing so please make sure it will fit onto your table.
We ship worldwide, just enter your country to see the prices before you comit to buy.
To see how much an item is in your currency you an online currency converter such as www.xe.com
Form where we get all these stand ? Pls guide mam
You can buy this the clamp from our shop here:
www.sarahhomfray.com/myshop/prod_4538062-Versatile-table-clamp.html
@@SarahHomfrayEmbroidery where is your shope ?
Wish you had an American distributor. Shipping is more than the exciting product. Not your fault but still disappointing!
It is disappointing Patrice; we only charge what it actually costs and shipping to the US used to be a reasonable price but over the pandemic it just went up and up :(