How to convert ps2 mouse to usb | PS2 To USB
Vložit
- čas přidán 4. 09. 2024
- In this video i will show you how to convert ps2 mouse to usb .
Remember, this method will only work on mouse produced after 2005,
and do not do this method for ps2 keyboard.
pattern:
drive.google.c...
drive.google.c...
drive.google.c...
drive.google.c...
#usb #ps2 #mouse #usbtops2 #ps2tousb
No it doesn't work this way. You need extra IC. You can connect plus and ground same but the main problem occurs when you try to connect data connections. Because in PS2, data goes through a single cable, while the other cable is used for synchronization. In USB, data is carried through two cables, one positive and the other negative.
Thanks for uploading this wonderful video.... I just changed the same of my laptop mouse.. Keep it up
it wont work, since ps2 and usb are 2 different protocols,
just directly connecting ps2 data transfer wires to usb wont work, you would need a electronic converter for that,
data transferred by ps2 logic wont be understood by simple usb wires,
just from my opinion it wont work
For a short time, some computer boards had USB controllers that could understand PS2, but this was in the earlier 2000's. Newer systems do not always work both ways. You are correct.
Then how do the usb-PS2 adapters, so commonly available, work?
Do you think a $3 soldering iron can melt the wires?
It needs soldering wire and paste too..
@@sumantiwari2416 no need to answer anymore I just bought a mouse but thanks anyway.
my mouse has different colours there is yello,black,orange and big black what should i do?
Hello my friend.
Windows 10 just refused to show my ps2 mouse in device manager. rebooting many times did not fix it. Plugging another mouse in a usb port shows the mouse instantly.
So I thought I'd use your video to convert the ps2.
Inside the ps2 mouse I have 4 wires: black, white, green and red.
Those colors are exactly the same as in a usb cable for an old phone.
Do I connect the wires color to color or is there another trick?
usually the red and black are the DC + and DC -. The white and green i think should be flipped according to the video
can I do this with a keybord?
Not if you can't read.
What about the drivers?
Por que mi raton no tiene el cable azul?
My mouse has a 5 wires what should i do?
one of them is not important (ground)
@@matthewheelie4432 what color it is?
@@ejdetoya826 mine is black but you can check with a ohm meter
buy a new mouse with usb
@@ejdetoya826 use a multimeter. probe the connector's shielding with each of the 5 wires, checking for continuity. one of them should make your meter beep.
Does this work to keyboard as well?
Sure, if the wire configuration is same as the mouse i.e only 4 wires.
@@sumantiwari2416 But it doesnt work for me!
And also he said in the end of the video, this method maynot work for keyboards