Phantom 85 Motorized Bike - Hits [52MPH +] & Could've Gone Much Faster!

Sdílet
Vložit
  • čas přidán 5. 10. 2021
  • Please subscribe for more! Today in this video we will show you almost the max speed of the Phantom 85. As we were about to hit the power band something happened and it wasn't the typical bushing failure, it was something different and unusual. Below are all the links for the motor and parts! Please watch the video to learn more!
    Speedometer app: apps.apple.com/us/app/speedom...
    Engine kit: www.bicycle-engines.com/ztmot...
    Piston pin bushing: rdmanu.com/products/aluminum-...
    Tires: amzn.to/2XbrGsU
    Lights: amzn.to/38ZlOFR
    415H Chain: amzn.to/2VCdzN2
    Handlebar: amzn.to/3Eaobnx
    Stem/goose neck: amzn.to/3lfNEDJ
    Thumb Throttle: amzn.to/3z4X5L9
    Double springer front forks: amzn.to/3A8ZTYG
    G2 Reed: amzn.to/390WBuQ
    G2 Reed intake: amzn.to/3C6wcsa
    Exhaust: RM85 from a Suzuki (can be found on ebay). Also needs header to be welded.
    Exhaust Silencer: amzn.to/3uk1M2N
    Spark plug: amzn.to/3m0VAZO
    Mikuni vm18 air filter: amzn.to/3F3PtMT
    22mm Cross bar (used as pipe/exhaust support): amzn.to/3zSQDal
    22mm clamp on mounts: amzn.to/3CTggcR
    Phone holder: amzn.to/39SL7d3
    Royal purple 2 stroke oil: amzn.to/3AUtxRS
    #ZTMoto #Phantom85 #Mods
  • Zábava

Komentáře • 271

  • @dustinh4175
    @dustinh4175 Před rokem +29

    This is how motorcycles started a hundred and fifteen years ago and there still fun as hell

  • @Aziz-wl1xf
    @Aziz-wl1xf Před rokem +30

    Big respect man! Takes big balls to ride that thing that fast

    • @danajett
      @danajett Před rokem

      No way in he'll I'd do that the would be extremely painful

    • @Aziz-wl1xf
      @Aziz-wl1xf Před rokem +2

      @@danajett same here, he's kinda crazy to ride it in shorts :D

    • @aranyrigo1871
      @aranyrigo1871 Před rokem +1

      There are electric scooters which go 120 and 150 km/h, those are dangerous and anybody can buy them, kids use them.

    • @Chad_Thundernuts
      @Chad_Thundernuts Před 11 měsíci +2

      @@Aziz-wl1xf For real, at that speed it would be good to use some motorcycle protective gear 😅

    • @XSorrowGamingX
      @XSorrowGamingX Před 8 měsíci

      I have a heavily modified YD100 that goes faster than 60. I just didn't go faster than that. It's insane

  • @rogerstafford-wakeinc.2088

    Thanks for the ride. Can hear the power band double echo when you got started.Godspeed ⚙️🚲⚙️

  • @deleted203
    @deleted203 Před 2 lety +1

    Just ordered one all fixed ported and balanced by Don Butler. Can't wait to test it out.

  • @sealeyscience6181
    @sealeyscience6181 Před 2 lety +2

    Yes man nice video nice speed man Wicked🚴💨💨💨💨 as you were

  • @Toxic2T
    @Toxic2T Před 2 lety +2

    Sounds beautiful.

  • @tonykartracer8032
    @tonykartracer8032 Před 2 lety +6

    I hear the rod pin bushing is weak with this motor and Phantom or whatever the company is, is offering a free upgraded replacement. Just a head's up for those who are thinking about buying this motor.

  • @mj-7444
    @mj-7444 Před rokem

    Nice work MJ

  • @Motorizedstuff
    @Motorizedstuff Před 2 lety

    Sounds nice bro good vid

  • @diydarkmatter
    @diydarkmatter Před 2 lety +30

    nice . sounded like it was pretty happy between 35 and 40 . thats still crazy fast on a bike . not a big fan of the phantom with all its problems . but i feel once they get it dialed in it will be a good engine . that leak if it dint crack at the wields it was more then likely coming from the gas cap . them cheap tanks suck . the caps can be fixed with a inner tube . just cut out a new rubber seal or use cork gasket maker . they dont fit tight enough . take care . ride safe .

    • @angelamosley7419
      @angelamosley7419 Před 2 lety

      ❤❤❤❤❤❤❤❤❤l❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤llll❤❤❤❤❤❤❤❤❤

    • @theLyzhendricks
      @theLyzhendricks Před 9 měsíci

      ​@allaboutbikesslideshowreal9741😂😂 paper weigh lol

    • @GROK815
      @GROK815 Před 3 měsíci

      What would be a good alternative motor
      ??

    • @diydarkmatter
      @diydarkmatter Před 3 měsíci

      @@GROK815 not sure but i think they fixed the issues with the phantom now . there is another one for like 200 dollars called the avenger 85 that i guess is super fast right out the box .

  • @zer037.
    @zer037. Před 2 lety +36

    Next video, yes do more tests! Take it all the way past 60mph wide open.

  • @cartracer64
    @cartracer64 Před 2 lety +1

    very impressive!! like the auto start. this is a 2 stroke motor what was top rpm's. was this put together from a kit or do you buke the bike as is? how much invested?. thanks

  • @WesAdams-HillsideAuto
    @WesAdams-HillsideAuto Před 2 lety +2

    Very cool…. What app are you using on your phone? Also, what mount are you using for your phone? Thanks for the video

  • @GuilhermeTrojan
    @GuilhermeTrojan Před 2 lety +3

    it sounds awesome 35+mph!!

  • @tedcater9624
    @tedcater9624 Před 2 lety +1

    Bike sounds good great video make video going 60mph. Bike life enjoy the ride

  • @trecon8296
    @trecon8296 Před rokem +1

    Wow amazing vehicle

  • @LAHover
    @LAHover Před 2 lety +19

    Nice work! you got it sounding and running clean :)
    If you take any long trips with that motor let us know how it does on gas.

  • @Kasefe80cc
    @Kasefe80cc Před 2 lety +10

    Thats really fast for a motorized bike!

  • @Nvent1
    @Nvent1 Před 2 lety

    So cool, i want to put a thumb throttle on my bike. I see the link you put, was it easy to install. Did the throttle cable work? Any tips help thank you

  • @Op1zilla
    @Op1zilla Před 2 lety +2

    She was eatin, deff had a lil more, but time to suit up going that fast, ggz 👽

  • @jmsxmedia1364
    @jmsxmedia1364 Před 2 lety +3

    Dopeeee 🔥

  • @davethacker8410
    @davethacker8410 Před 2 lety +14

    Sounds like the pipe is starting to come into resonance at around 46, was a bit rich leading up to that. You might try making a header spacer that is gasket matched and spacing the pipe out about an inch to lengthen it about. It will come into resonance sooner. and Yes, it did sound like it would go lots faster.

    • @MrSagerific95
      @MrSagerific95 Před rokem +1

      It sounds like that’s when he goes WOT… you can hear a noticeable difference in induction noise.
      But I agree, extending the header would make the resonance happen sooner.

  • @TheBigred1781
    @TheBigred1781 Před 2 lety +2

    That's awesome. Glad to see some safety gear bud.

  • @RoyalET85
    @RoyalET85 Před rokem +2

    What type of bicycle you you recommend for this? Are the bolts long enough to connect to any bicycle?

  • @clutcha200cc8
    @clutcha200cc8 Před 2 lety +4

    Ripping 🔥🔥🔥

  • @agbomichael384
    @agbomichael384 Před 2 lety +7

    I will be so happy if you teach me the process involved in creating this

    • @jgbelmont
      @jgbelmont Před 2 lety +7

      Put a motor on a bike. 85cc phantom.

  • @chasebowyer1554
    @chasebowyer1554 Před 2 lety +1

    That bike will fly in it even looked like you were a little bit rich on the mix

  • @chasebowyer486
    @chasebowyer486 Před rokem

    That's a really nice bike can I please ask what kind of carbrater you are using on it I like it

  • @JMB676
    @JMB676 Před 2 lety +1

    I'm goin try to build one of these for myself

  • @shawnkelley9007
    @shawnkelley9007 Před 2 lety +4

    Careful with fuel leaking from gas cap. End of one of the test videos i saw ark from the plug wire from CDI against frame

  • @helstavern4304
    @helstavern4304 Před rokem

    my tank had the same problem, you can wrap the bikes pipe with a rubber strap and then put the tank over the rubber, worked fine for me

  • @Noneyabusinesscoolstorybro
    @Noneyabusinesscoolstorybro Před 11 měsíci

    What oil do you use for this engine? I can’t seem to find what’s mentioned in the instructions as “Valvoline Two Stroke Racing Oil,” is this the same as Valvoline multi purpose oil for two stroke engines? I also already have Lucus’s semi-synthetic 2-Cycle oil, is it safe to use?

  • @johnehotrod
    @johnehotrod Před 2 lety +1

    Is that a stock setup and what size sprocket are you running?

  • @drohrstestes
    @drohrstestes Před rokem +3

    Sounds like a Yamaha 2-stroke. Love the pipe! what size rear sprocket you have on there?

  • @leonardarola
    @leonardarola Před 2 lety +1

    Thanks for the ride.

  • @mikelowry3248
    @mikelowry3248 Před 2 lety +1

    Is that the stock engine only without any modifications added?

  • @wishbone20t
    @wishbone20t Před 2 lety +1

    Love it! I'm sure your ask all the time what GPS app you use?

    • @MJTechChannel
      @MJTechChannel  Před 2 lety

      I provided the link to app in the description! 😉

    • @wishbone20t
      @wishbone20t Před 2 lety +1

      @@MJTechChannel I see it thanks!

  • @beaustraub3493
    @beaustraub3493 Před 2 lety

    Did you change the catb jet? Sound like she's running rich four stroking on low end and not clearing until mind throttle, even though she was pinned most of the time

  • @yomontOME
    @yomontOME Před rokem

    How is it so loud with the silencer on it I have the same silencer on my motorized bicycle and it's real quiet did you take something out of yours to make it loud and how is the back pressure well that's probably not the question because in the video I can see it rash real good

  • @mrk10utt
    @mrk10utt Před rokem

    what upgrades do you hjave on it cause im new to motorised bicycles i wanna buy one since they are so fun but i want a fast one like this how much does everything cost? and do u have links

  • @ArthronOfFir3
    @ArthronOfFir3 Před 2 lety +2

    yo man, i switched my tank to the supposedly 1 gal tank. worth it for daily rides but I'm sure you'll need one as well. note though that I'm looking for replacement petcocks for the stock one seems to me be weaker than a motorcycle one

    • @joshuagerlach6943
      @joshuagerlach6943 Před 2 lety +1

      Me to I also used epoxy putty & glued it to the frame & around the studs to prevent it from braking again .. .. it’s still good 3000 miles later.

  • @joneserupinsmoke9161
    @joneserupinsmoke9161 Před rokem

    I been dealing with failure as soon as I started messing with these phantom engines on all three version

  • @joneserupinsmoke9161
    @joneserupinsmoke9161 Před rokem

    Bro where did u get the phantom from I keep getting them from this one company and they keep blowing up after a few miles just got the"new" one again and had plug out walked it to door and ring snagged on port and broke .I'm trying to find out if the ones off Amazon are breaking like these ones

  • @boostednova8278
    @boostednova8278 Před rokem

    Hey I know this is one of your older videos but im always looking for a good speedo/gps App and your looks sick...
    What's the name of your Speedo App if you don't mind ??? OR does anyone else have one similar to his ???
    Thanks in advance !!!!!

  • @Hunter1st
    @Hunter1st Před 2 lety

    I wish there was a way to just buy that exhaust pre modded to work on the phantom 85.

  • @erichayes4947
    @erichayes4947 Před 3 měsíci

    That's awesome how did you get it to go 52 mph and where do you order a phantom 85

  • @TheKing-dm3br
    @TheKing-dm3br Před měsícem

    How many miles you get out of that tank?
    Your builds are awesome btw!! 😄

  • @motorizedbicyclenation53cu90

    Use inner tube pieces and ultra copper high temp gasket maker under the rubber seal two should be enough clean well and hold together w the gasket maker Wich is fuel proof will seal well

  • @frankwilliams2095
    @frankwilliams2095 Před 2 lety +2

    Nice ride and presentation.

  • @videocreatingvc6472
    @videocreatingvc6472 Před 2 lety

    I want to put a second pasenger on the motorized bike is the phantom 85 good for that or should i buy something else

  • @danrandom7606
    @danrandom7606 Před 2 lety +1

    nice :)

  • @outlaw1179
    @outlaw1179 Před 2 lety +3

    How many miles can this engine go??

  • @uberman7441
    @uberman7441 Před 2 lety +1

    She go!

  • @billstrube3425
    @billstrube3425 Před 8 měsíci

    Where did you purchase the expansion pipe and the muffler?

  • @DShockGames
    @DShockGames Před 2 lety +2

    Not bad :)

  • @christiancooper478
    @christiancooper478 Před 2 lety +2

    I hate 2 strokes, had the worst experiences. Made my bike fall apart, 10 gas tanks in 2 months, went through a few engines, one was a generic cheap Chinese engine, went through a stage 1 engine from bikeberry, completely damaged the engine, bought the stage 2 engine kit, everything worked fine until i tried putting that upgraded compression head on, would not work no matter what i did, like it was obnoxiously annoying, i gave up, but bikeberry’s customer support was absolute top notch, like its something you can really appreciate. Ended up getting a cool muffler, didnt work with the bike i had because the mounts on the engine were at a weird angle which wouldn’t work, they gave me store credit, had got a speedometer they had, better grips and throttle, they were always there, i may check them out later to see if they got anything new, since its been a few years. I on the other hand just got a phatmoto 2022 fat tire, absolutely fun to ride, i was iffy on the speed, but its to be realized that speed isnt always everything you need. I do plan on modifying the governor to get a little more out of it without losing torque from a smaller sprocket. Where I’m at, i cant really avoid the hills so the torque is good to have, got this one hill that has this weird double incline, it’s difficult to drive up with a car in the winter, everybody usually avoids it and take the less not so double inclined hills. All in all, as expensive as the phatmoto is, to me its 100% worth the 1300$. Ive heard the clutch is bad, but i havent had any problems with it.

  • @justindecker-ok5tm
    @justindecker-ok5tm Před 9 dny

    What app are you using on your phone?. Thx

  • @curtisjohnson7023
    @curtisjohnson7023 Před 2 lety

    What part of Florida are you in?

  • @RicardoGarcia-jq3xf
    @RicardoGarcia-jq3xf Před rokem

    Where can you find that type of exhaust you have?

  • @thomasdavigga
    @thomasdavigga Před 4 měsíci

    Hi can i ask what carb you running and what pilot and main # ?

  • @deleted203
    @deleted203 Před 2 lety

    What sz sprocket you using?

  • @survivalishardstaystorng

    These gas tanks all have a flaw with the gas tank cap and it's really a design to allow air to come into the gas tank so your fuel can gravity feed down to the carburetor to solve this issue is you simply get another gas cap that has an actual gasket but on the center of the gas cap it has an air inlet valve that's about a half an inch above it a little stem if you will this prevents the gas from splashing out but the gas cap itself will have a gasket sealing the cap like a real gas cap and you're welcome

  • @kenmcmaster6938
    @kenmcmaster6938 Před rokem

    that fast man

  • @willthesadpills2903
    @willthesadpills2903 Před 6 měsíci

    what app is that cause im trying to test mine too

  • @Westhelockpicker
    @Westhelockpicker Před rokem +1

    I just got mine but haven't installed it yet cause it's still too cold out. What oil do you use for break in. The paperwork said 20 to 1 but did you use any certain brand of two stroke oil?

    • @MJTechChannel
      @MJTechChannel  Před rokem

      Buy the lucas brand

    • @Westhelockpicker
      @Westhelockpicker Před rokem

      @@MJTechChannel I've got people telling me only organic or full synthetic or whatever. In all my other engines I just used what my local parts store has but for the phantom 85 I wanna use what's working for the others

    • @Westhelockpicker
      @Westhelockpicker Před rokem

      ​@@MJTechChannel I've also heard that a bigger carburetor really wakes these up

  • @yoshbobbi7216
    @yoshbobbi7216 Před rokem

    I have a friend that has a Yamaha mate v50 that can reach 120 with just 15 tk carburetor,boost electricity(you know wht i mean), boost exhaust and a 46.5 mm kit ......what type engine is that???

  • @CodyDavis1993
    @CodyDavis1993 Před rokem

    Where do you get that exhaust?

  • @thxforsubbing7138
    @thxforsubbing7138 Před rokem

    I have a 100cc motorized bike kit and it barely reaches 35mph when I try tuning the carb it doesn’t change a thing any Solutions

  • @b-ill2195
    @b-ill2195 Před 2 lety +2

    Is that a MZ65 clone and Great 🤘 sounds powerful

  • @joeyjones1536
    @joeyjones1536 Před rokem

    Hi mj what kind of frame is this thank

  • @007tallguy
    @007tallguy Před 20 dny

    Nice working bike!! 👍👍😁
    On a side note, the adrenaline kicks in at 50mph? I'll bet the pavement would kick in really good too, especially on those bare arms/legs. 😮🤪

  • @horacehofman6864
    @horacehofman6864 Před rokem

    What size cog do you have on the back

  • @rajeshtanwar3688
    @rajeshtanwar3688 Před 9 měsíci

    Can you send the recipe for it. And how can we limit speed

  • @artemusmaximus2976
    @artemusmaximus2976 Před 2 měsíci

    Kid..... you got long way to go. .

  • @guerrerosaurio
    @guerrerosaurio Před rokem +1

    Do more teeth on the sprocket mean faster speed or just faster acceleration?

  • @hihikiki88
    @hihikiki88 Před rokem +1

    What about when hitting pot holes with those tires, and no forks/ suspension???

  • @gasgos360
    @gasgos360 Před 11 měsíci

    Am I can do 110 with a jackshaft kit

  • @graysonwachter1643
    @graysonwachter1643 Před 2 lety +1

    Is that pwk carb I have a 28mm with the Dio set up but it revs up I went threw check all vac leaks what size jets you using if you don't me asking ?

    • @MJTechChannel
      @MJTechChannel  Před 2 lety +1

      Dio reeds like to air leak. Check the hoses and gaskets. I am using a 21mm pwk. I have a 115 main, 39 pilot, needle set to 2nd slot from the top and 2 turns out on the air screw

    • @graysonwachter1643
      @graysonwachter1643 Před 2 lety +1

      @@MJTechChannel yeah I hit 42 with stock carb an gutted pipe with 28t sproket

    • @MJTechChannel
      @MJTechChannel  Před 2 lety

      @@graysonwachter1643 No video, no proof sorry!

    • @graysonwachter1643
      @graysonwachter1643 Před 2 lety

      @@MJTechChannelhaha ok your rite I'm bluffn lls

  • @Mike-tf9rx
    @Mike-tf9rx Před rokem

    Wow that screaming on a bike!

  • @artofdisguy3401
    @artofdisguy3401 Před 2 lety +3

    I'm gonna bet once you crack the jug you will find a piece of piston broken off under the wrist pin, for some reason the pistons are cracking around the skirt.
    I suspect bad casting methods

    • @marthamryglod291
      @marthamryglod291 Před 2 lety

      The wrist pin bearing is weak and allows the piston to rattle in the bore after not too long. Broken piston skirts result in catastrophic damage, but the origin is the bad bearing/bushing.

  • @jimfitzgibbon5492
    @jimfitzgibbon5492 Před 2 lety +1

    what speedometer are you using?

    • @MJTechChannel
      @MJTechChannel  Před 2 lety

      apps.apple.com/us/app/speedometer-55-gps-speed-hud/id557871911

  • @sulaimaanhr6982
    @sulaimaanhr6982 Před 2 lety

    What size sprocket

  • @ELISRACINGTEAM
    @ELISRACINGTEAM Před 2 lety

    saludos .loco de ver ese video . no es facil lo de el gps recuerda grabarlo con el screen record de el telefono .porque elgps sale pero cuando lo pones en el edition gopro no lo pone ,recuerda grabarlo con el tel ,muchas felicidades en la 63mph yeeeeeeeeeeeeee

  • @edwardfucci7309
    @edwardfucci7309 Před 2 lety +1

    Okay I'm going to give a comment a lot of people are saying out there that the yd 100 don't hold a candle to the phantom 85 but the yd 100 don't come with a read valve don't come with other stuff that the phantom 85 comes with so at all fairness. I bought a why do you 100 put that motor on a hyper bike it did 55 mph and I did not have a big pipe on it I used a knockoff mz65 pipe did mild porting to it ran a 32 sprocket on it all I did was clean the ports up on it that's it and the bike would do 45 mph. With no problem so then I pulled it apart out of all fairness because the yd 100 don't come like the phantom 80 kit with the big pipe the Reed valve all that I didn't even break the b**** in I ran it at 40 to 1 right out of the gate stock carburetor stock everything all I did was cleaned it up that's it then what I did was gave it a little bit more work and the funny thing was I didn't even put a re valve nothing on it I ran the stock carburetor then the bike hit 47.49 mph I learned my mistakes on the yd100 so now I got a new one. The fastest speed I hit on my yd 100 was 55 mph but I learned from a mistakes what I notice about the phantom got a lot of low-end power probably mid-range power I'm going to have to get one of those and then we'll see personally in my opinion I've seen guys run 70 plus miles per hour on bikes using s*** carburetors tiny carburetors not big ones it's really not that necessary when I built my first why do you want 100 I went way too big on the ports didn't change the pipe made mistakes we live and we learn it's velocity that's what you want when you're porting staff it's not always let's gouge it out make it huge I found out on these two strokes that is not the answer I've seen guys with stock carburetors f*** somebody up that had a carburetor three times in size tiny little carburetor tore their ass up in the top end it's the velocity it's the flow that's just my opinion

  • @kmack282
    @kmack282 Před rokem

    Runs great! Hot Exhaust by your calf isnt ideal lol

  • @cls_alex13
    @cls_alex13 Před 2 lety

    Is it still stock

  • @David-r9d
    @David-r9d Před dnem

    Did you buy the 36t

  • @jorelldye4346
    @jorelldye4346 Před rokem

    Why did you put everything except the sprocket size in the description? That's an important detail.

  • @Chilife78
    @Chilife78 Před 2 lety +1

    Awesome video. Go for the Gusto! You got 57-60 easily 👑

  • @ayyanahmad4602
    @ayyanahmad4602 Před rokem +1

    Im buying a Phantom 85. Its asking me to pick a sprocket thooth size, options are 36tooth, 44tooth, 48thooth. Does it matter which one I pick?

    • @MJTechChannel
      @MJTechChannel  Před rokem

      Yes, it depends your weight and terrain. Mountains/hills, flat land etc. For example I weight 225 but live in FL where we have mainly flat land. A 36t served me well.

    • @ayyanahmad4602
      @ayyanahmad4602 Před rokem

      @@MJTechChannel I weight like a 150lbs which one should be good for me? Which one is the fastest?

  • @Oddball159
    @Oddball159 Před rokem

    what would happen if you hit a pothole?

  • @David-r9d
    @David-r9d Před dnem

    Rid you add anything to it?

  • @colinwhite144
    @colinwhite144 Před rokem

    I wish these were legal it beats battery power I mean you said keep at 42mph you can't do that with battery ita pity there should be a good silencer on exhaust pity about the tank if I was younger I would get one even if the law is to register its worth it no worries of loose power not like battery good video

  • @Keynen_Brant1
    @Keynen_Brant1 Před 2 lety

    What about the corb

  • @user-rq6cf3lx7k
    @user-rq6cf3lx7k Před rokem

    Бро,это круто.

  • @carloscardova4221
    @carloscardova4221 Před rokem +3

    Very hard for me to
    believe with out a gear
    shift unit this motor
    can go faster then 37 Miles,
    I was just about to ask you
    about Yd 100 , can it go faster
    with an Expansion chamber
    exhaust . not sure if you used
    one on it, still looking around
    in your videos to see what you
    had to say about it .
    is it really a larger Bore and stroke,
    I'm checking out a piston on sale
    with three rings they say it's 52mm
    reed piston kit 12mm pin 110cc gas
    motor engine 2-stroke . they also got
    52mm jumbo cylinder 110cc steel
    sleeve
    for sale as well, I have some question
    to ask about it, being that your trying
    out and testing
    just about anything that has to do
    with those motorbike engines I was
    thinking of asking you about it .
    is there a specific cylinder head for
    this 52mm jumbo cylinder or is it the
    one you riding on, in this video,
    the spacing mount to the cylinder studs hole
    are space out to 60mm on cylinder .
    not sure for what engine .

    • @jorelldye4346
      @jorelldye4346 Před rokem +1

      He has an RM85 on it clearly in the video, and a G2 reed. Did you watch the video? This is a Phantom 85 motor. You shouldn't doubt the speed of this beast of an engine.

    • @carloscardova4221
      @carloscardova4221 Před rokem

      @@jorelldye4346
      ¸~⁾⁾⁾⁾'),
      (⁾" 👀
      ,) ~ ⁾ Yes I did
      ( watch video
      it's a good video.
      If I ever get to test that
      engine I would tell if
      it's that fast ,
      . • 🙋° * • ~
      • • ~

    • @jorelldye4346
      @jorelldye4346 Před rokem +1

      @@carloscardova4221 with an RM85!

    • @fr33dumb0
      @fr33dumb0 Před rokem +1

      Phantoms def have power for beyond 40mph no shift.
      The bike in this video has a yd100 bottom end and a transfered and windowed piston top end. True 85ccs.
      That pipe is helping him along a little too

    • @carloscardova4221
      @carloscardova4221 Před rokem

      @@fr33dumb0
      ¸~⁽⁽⁽⁽⁽(⁽', The Phantom
      (⁾" ⁽°⁾,〉⁽°⁾ 85 V3 👻
      ,⁾ ~ ... improve engine
      ( I could see °?• for
      twenty twenty three 👈⁾)

  • @wyattsmith7235
    @wyattsmith7235 Před 2 lety +1

    What tooth sprocket do you have on your bike

  • @TheBlackAether369
    @TheBlackAether369 Před rokem

    What motor is this

  • @gta5grindzxb145
    @gta5grindzxb145 Před 2 lety

    Is that a 36 tooth sprocket?

  • @cjtaylor1972
    @cjtaylor1972 Před rokem

    Is this version 3