Does no one now how to use a hammer & tongs anymore? That's not a kukri! That's a kukri shaped object. You might as well buy a Chinese knock off because they are both not made the Genuine way. Does no one know hoe to draw & upset iron anymore. No craft, just a stencil & an angle grinder. I'd be curious if that object is intact even after a year of regular use.
@@angrypineappleknives it not gate keeping, it's material science & constructive critisism! that cut out crystal structure & internal forces would be against it'd implementation. Use that cut out knife on brush, an animal or what have you it would likely break. ''If a job is worth doing, do it right'' Nice aesthetic but not fit for purpose. I will admit I'm a tad unnecessarily irritated. Doesn't have to be forged but he didn't do it the industrial age way either. Cold stamping is the common industrial way most often followed by electrolytic surface hardening with final optional protective impregnated coating of some sort. Grinding depends on tools/blades purpose. I am a Fabricator, welder, mechanical & electrical engineer by profession. My Grand father & great Grand instructed me in smithy work as both where primarily Ferrier's & cart wrights though they did other work & craft as well. My grand father made the gates to the bank of England & my Great grand father worked in the royal armoury of Britain. I worked metal before I could talk as a mute till 7 under their instruction. I know what I am talking about when it comes shaping metal. Be it drawn or upset by hammer & tong. Or by more recent industrial means.
@@angrypineappleknives He has the basic tools but not the Instruction, knowledge & practice. Has artisanal skill which is about 1/2 the battle. The lad requires an elder to show him how. Unfortunately I am across the pond & I suspect him a yank though I'm sure some one would take him as a part time apprentice or what have you. All Smiths do it & learn from their elders & other share their ways with other smith of ways passed down for centuries.
Просто безумно красивый кукри, плюс ещё и чертежи добавили, вы просто лучший мастер🤤🤤🤤🔥 Если вам не сложно напишите пожалуйста, какую пасту для полировки вы использовали после WD-40
That’s the perfect blade for bushcraft camping, impressive, it’s to good looking though I would take it for looks, but use some cheap 20 dollar knock off excellent knife
Рекурву не просто точить. И было бы круто, чтобы часть бутылки оставалась на месте, в то время как верхняя часть отлетает. Это зависит от угла заточки и конечно под грамотным ударом клинка. Есть видео мастера ИЗ, который изготовляет шашки и не только их. Посмотрите, как на самом деле делают великолепные клиники. Правда стоят говорят образно, как крыло Боинга) но оно того стоит
This Kukri came out beautiful . . . .the finish though for me would be a flat black/natural color instead of shinned. Love the edge, sharp as it should be. What was the final over all weight of this blade?
I loved the process and the final product, beautiful. Question, what kind of metal is that, does it rust? what special care should I have for one of those?
Amazing and beautiful work. Neat, nice, and deadly. Special for a zombie Hunter Campaign. Greetings for you, from Guatemala, the Land of Quetzal Bird, simbol of Freedom.
It's a decent blade, but also a typical paint by number build. Not a lot of craftsmanship and artistry goes into these type of builds. I'm sure it acts, performs and would last just like a kukri I would order on Amazon for 40$.
It takes some good skills and a lot of hours to make a knife like that even with "paint by numbers" . Clearly its harder when you forge the blade but i think he did a good knife
Install Mech Arena for Free 🤖 IOS/ANDROID: clcr.me/CreatorQi_MA and get a special starter pack 💥 Available only for the next 30 days
Good
Does no one now how to use a hammer & tongs anymore?
That's not a kukri!
That's a kukri shaped object.
You might as well buy a Chinese knock off because they are both not made the Genuine way.
Does no one know hoe to draw & upset iron anymore. No craft, just a stencil & an angle grinder.
I'd be curious if that object is intact even after a year of regular use.
@@arnijulian6241 Not a kukri because it wasn't forged??? Quit gatekeeping.
@@angrypineappleknives it not gate keeping,
it's material science & constructive critisism!
that cut out crystal structure & internal forces would be against it'd implementation.
Use that cut out knife on brush, an animal or what have you it would likely break.
''If a job is worth doing, do it right''
Nice aesthetic but not fit for purpose.
I will admit I'm a tad unnecessarily irritated. Doesn't have to be forged but he didn't do it the industrial age way either. Cold stamping is the common industrial way most often followed by electrolytic surface hardening with final optional protective impregnated coating of some sort. Grinding depends on tools/blades purpose.
I am a Fabricator, welder, mechanical & electrical engineer by profession.
My Grand father & great Grand instructed me in smithy work as both where primarily Ferrier's & cart wrights though they did other work & craft as well.
My grand father made the gates to the bank of England & my Great grand father worked in the royal armoury of Britain.
I worked metal before I could talk as a mute till 7 under their instruction.
I know what I am talking about when it comes shaping metal. Be it drawn or upset by hammer & tong. Or by more recent industrial means.
@@angrypineappleknives He has the basic tools but not the Instruction, knowledge & practice.
Has artisanal skill which is about 1/2 the battle.
The lad requires an elder to show him how.
Unfortunately I am across the pond & I suspect him a yank though I'm sure some one would take him as a part time apprentice or what have you.
All Smiths do it & learn from their elders & other share their ways with other smith of ways passed down for centuries.
Просто безумно красивый кукри, плюс ещё и чертежи добавили, вы просто лучший мастер🤤🤤🤤🔥
Если вам не сложно напишите пожалуйста, какую пасту для полировки вы использовали после WD-40
Your methods aim at keeping things precise, and its evident in the final product. Awesome.
Love the plunge line... it came out very crisp and nice.
What are you using for your steel?
GORGEOUS!
Beautiful knife, love the design especially the knife handle
14นิ้ว..สวยมากกกกก..ครับ
Un espectáculo de trabajo!! Te ha quedado precioso amigo!! Si señor!!👍
Buenas noches desde Argentina muy lindos trabajos con discos de arado se pueden hacer también ??
Beautiful knife. Wonderful craftsmanship demonstrated.
That’s the perfect blade for bushcraft camping, impressive, it’s to good looking though I would take it for looks, but use some cheap 20 dollar knock off excellent knife
Рекурву не просто точить. И было бы круто, чтобы часть бутылки оставалась на месте, в то время как верхняя часть отлетает. Это зависит от угла заточки и конечно под грамотным ударом клинка. Есть видео мастера ИЗ, который изготовляет шашки и не только их. Посмотрите, как на самом деле делают великолепные клиники. Правда стоят говорят образно, как крыло Боинга) но оно того стоит
Beautiful kuckri
Bellissima complimenti hai fatto una opera d'arte
You've made a beautiful kukri.
Piekne cudo chciałbym taki .Pozdrawiam i czekam na inne projekty.😉
The Kukri Knife is very awesomely 🔪👍
Great knife what steel did you use?
1095, Sir.
This Kukri came out beautiful . . . .the finish though for me would be a flat black/natural color instead of shinned. Love the edge, sharp as it should be. What was the final over all weight of this blade?
500g
Bellissimo lavoro! 😉👍🇮🇹
I loved the process and the final product, beautiful. Question, what kind of metal is that, does it rust? what special care should I have for one of those?
Nice knife 😁✌️
Да! Супер! 👌👌👌
Outstanding blade mate 👌👌👌👌👌👌
Nice the drawing on deep "gorgous" blue technique 04:00😉
Excellent work. beautiful looking khukhri
Really nice kukri bro, I like how you did the groove
It would be more perfect if the curve of the groove was made smoother.
Beautiful job 👍.
What a wonderful Khukri
Больше всего понравилась болгарка.
เป็นเล่มทื่2ที่ยากได้ที่สุดในโลก
deslumbrante...Parabéns ótimo trabalho.
Hi, very good knife, respect! Could you send me drawings with dimensions, please?
There is a download link in the video description, have you found it?
Солидный нож.Не тяжеловат ли??? Успехов в творчестве.Привет из России!!!!
Это не нож а орудие убийства. Как у Сильвестра Сталлоне)))
Фарма ножа необычная
При общем весе 500 грамм это мачете, если он слишком легкий, то работать будет плохо.
Если он используется для причинения вреда людям, он - орудие убийства.
It's #Khukuri♥️👑
#PrideOfNepal😎👑
How long does It take to learn making kinves at that quality?
A decade?
If you have the patience to learning, half a year is enough.
Thumbnail attracted my all attentions so do the complete kukri, Gorgeous shape with sharp moves .
Edit: first comment after your pinned comment
Thank you for your sincere comment.💗💗
beautiful knife but u forgot the kukuri trademark by the handle
Another masterpiece design I love. Keep up the great work! 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽
Would be actually usefull if you make the handle small and blade long
Not : kukri
It's khukuri.
Love from nepal🇳🇵🇳🇵🇳🇵
Amazing and beautiful work. Neat, nice, and deadly. Special for a zombie Hunter Campaign. Greetings for you, from Guatemala, the Land of Quetzal Bird, simbol of Freedom.
Thanks for including the template. That’s a real nice touch. Been looking for a good one.
You are welcome.
Super. Beautiful knife.
De colección, un lujo.
Beautiful…..
Your one of the best bro!👍👌
Another really good knife - keep up the nice work 👍🏻
Stunning work u have my subscription
VER.i...GOod..อยากได้จัง
BEAUTIFUL
Beautiful knife, thank you for the download
Very very beautiful knife osm
Супер!
It's a decent blade, but also a typical paint by number build. Not a lot of craftsmanship and artistry goes into these type of builds. I'm sure it acts, performs and would last just like a kukri I would order on Amazon for 40$.
It takes some good skills and a lot of
hours to make a knife like that even with "paint by numbers" . Clearly its harder when you forge the blade but i think he did a good knife
Tuyệt vời lắm bạn à. Xin hỏi: bạn xịt nước gì vậy (lúc đánh bóng), thép gì vậy bạn ???
من فضلك انا محتاج اعرف بتجيب الرسمه الهندسية للسكين من اي موقع
What was the little white tool used on the fuller?
Great looking Kukri
Enjoyed your video and I gave it a Thumbs Up as a support
Thank you for your support, it has helped me a lot, my friend.
@@creatorqi You're welcome
Wow this blade s ok amazing , perfect design ,I love it 👌👌👍👍
So shiny it can be used for a face reveal
Great craftsmanship!
What steel are you using?
1095, Sir.
@@creatorqi thx :-)
Восхитительно!
How much would it cost to have one of these made my friend, love your craftsmanship
Maybe 250 bucks, but sorry no sale.
@@creatorqi what if I paid you to make another, your craftsmanship is amazing, job well done my blade brother
Can you make clever knife?
Very nice 👌
Awesome work! I give a Thumb Up.
Did you harden it
For the angles
What’s the tool you put on the knife when grinding
Impressive work!!! what kind of steel do you use for bolsters? thank you!
What bolster?I don't get your mean.
At 7.13 and following
Oh, it's stainless steel.
piece of art,,,great man,,,,
Magnífica 🤜🏽🤛🏽
Tuely great nife one of my two favorite big knives 😊
👏👏agora sim 👍😁, vc fez uma faca de responsa, fica só fazendo aquelas faquinhas de criança. tem que fazer essas faconas de macho✌😝rsr
what kind of steel do you have
perfect!
so nicee
Beeeuuuuutiful 🎉🎉🎉💖
Knife is amazing
Nice sir
Can u please tell me how to collect good quality high carbon steel??
Go to a blacksmith or google
@@sgambless Thanks dude.
@@sgambless thanks dude.
@@saminnoor5541 no problem generally u can go to a car scrap yard and ask for leaf springs they good steel and also the crome part of shock absorbers
Fantastic, congratulations note 10
Good
Double good is better.😁
really good work. It's a nice result.
Thanks, budy！❤
Muito linda kukri.
Very nice nice
Excelent
Хороша работа! 👍👍👍
Какую сталь используете?
1095, Sir.
@@creatorqi спасиб0
@@creatorqi Ещё вопрос. А толщина металла!
5mm max.
Good job!
BRAVO!!!!!!!!!
How to order and how much
This is Nepali knife ."
What are the machine's used for this?
Excuse me? What machine?
Shiny!
Besinya besi apa ,besi per mobil atau besi spiral ,bagus dak untuk memotong sapi? dan berapa harganya satu?
It's so refined！！
Thanks, bro！
Well done. You should sell your wares. Maybe you have a trading page? I'd love to look there. Greetings from Poland...
good
Cokguzelbicak
เป็นมีดที่สวยที่สุดในโลกและอยากได้ที่สุดในโลกอีกเล่มครับ.14นิ้วสวย