How to Have Insanely Nice 4WD Interior FOR CHEAP!
Vložit
- čas přidán 23. 08. 2024
- Some idea of the cost's
Seats cost $400
Guages cost $230
Pillar support $80
dash mat $70
steering wheel $195
Boss Kit $80
Phone mount $25
I was spewing when I found out those clips where missing but i didnt want the whole video to go to waste so I thought heck why not just release it! hope you guys enojoy a little interior transformation on the Patrol, I think it turned out great and has made it such a nice ute to drive now! Thanks for watching as always guys, hope you enjoy!
SUPPORT ROAM LYFE: roamlyfe.com
INSTAGRAM: Roam_Lyfe
sad those clips where missing but I didn't want this video to go to waste! hope you enjoy :)
Where did you pick up the XR6 seats from and how much mate
The egt gauge is thermistor, the liquid and gas is in the stainless probe. The warmer the probe gets it decreases in resistance and colder it increase. The resistance values are scaled as a temperature when they are read bye the gauge.
Keep the Aftermarket wheel! It suits all the new upgrades you did and the chrome looks great with the gauges 😊👌
I would definitely go the nissan pulsar wheel 🤙
100 % agree on the dash mats. First "mod" I did when I got my Prado
Awesome interior mate! Absolute ripper. Loving ya videos! Love the patrol and if me personally go with the Nissan steering wheel! Yeeee!
Thanks! Will do!
Can't get enough of yor vids mate. Always so quick to click on the vids. Keep up the great content
Bump the crusty old wheel and keep the newy - good focal point and like you said, it complements the gauges. Top vid by the way.
I would run the nissan wheel and get some canvas seat covers to hide the XR6 seats
Great episode to watch, video quality is getting good! And pulsar wheel for sure, oem always
I reckon keep that wheel. looks mint with the polished gages !
Can't go past the old pulsar wheel mate 😂
How long till you drop a canopy on this rig?
Come a long way the old GQ. I'd run the pulsar wheel in it to keep that daily driver/comfort feel and look. It's a 4WD and not a racecar after all. Little side note, stick a multimeter probe in the coolant when it's running and check for a small charge going through the radiator. I installed a water gauge like that and did two radiators in the space of six months due to electrolysis eating a hole in the fins👎
Both the shirts looking minttttt. Need that Roam Lyfe sticker to finish up the build
Run the pulsa wheel and the rubber boots around the gear shifters will bring it all together
Looks rad mate!! Cant wait to see it in person 🤙🤙
The bolts on the seats were probably hand tight because in some cases its easier to remove the seat from the rails then take out the rails
absolute legend , wish you were based in WA bro 👊🇦🇺
She definitely needs a patrol docta air box mate
Should get ya self some rubber lined P clamps to hold that boost sender to the firewall or inner guard a lil more securley than cable ties. Although... cable ties are every 4wders number one must have item lol.
After market wheel suits that rig better I think just with it having a head of aftermarket parts in it now
everyone hates the SCA Guages but i honestly didn't have any issues with mine the only issue that i did find is the egt flips out a little when its wet but dries out pretty quick due to heat. but from reading the facebook heros i suspect half of them just had shit wiring or hadn't read the instructions like in regards to the low pressure warning and stuff haha
That setup for that water temp sensor is terrible, there are only 2 spots that work well, A, beside the factory under the stat (drill and tap existing to the left of OEM, or get a GU housing that has a spare port).
B, drill and tap the oil cooler housing (its the best spot but a prick to do unless your actually replacing the cooler).
Honestly bro I get what ya mean with the safety thing I’m 19 brought a Ute for 2k in good faith and rusted out to fuck when I was doing repairs and where my seats bolted on were aswell as my seatbelt
Mate I would highly recommend getting different gauges, I've got multiple mates that have had those SaaS track gauges and all of them have failed within 3 months.
gonna have to get the popcorn for this one
Awesome mate lovin your vids and lovin the patrol
Mate, looks mad and coals not even finished, keep it up ay, n yer nah I'd go with that minty pulsar wheel haha.
I love the colour of Coal 🤘
I would go the Nissan wheel but I like to keep things looking factory so it all blends
keep the wheel it matches the gauges, looks good
Cool vid bro and you gotta leave that sports wheel on that rig, finished that interior right of 💪💪👌👌
Thanks dude!! I’ve left the sports wheel on, I just like the new feeling to it!
Yea cool, looks mad like that 👌👌
Pulsar wheel for sure
put some anti seize on the probe threads so it wont snap off in the manifold again
Those pyro gauges don’t use fluid in them like you said the hotter the sender gets in the manifold the less resistance it has and the higher the gauge reads the stainless outer coating is just to protect the wiring in the engine bay from heat
epic build mate!! Looks mint!!
Great video once again. I have an x trail leather steering wheel and love it.
After market wheel for sure suits the interior better I think
Gidday mate love the vids u wouldn't be able to tell me where u got the cup holders from that's the one thing I don't like about my gq they have pen holders but not cup holders 😂
Patrolapart
i know the pain with no cupholders haha. 60 series cruiser life, although I have 6 cupholders now
The crusty old wheel for sure. The utes looking sick mate
Done a awesome job with the ol girl mate, looks mint! Just a question where did you get the N15 steering wheel from? Been chasing one of them for years for my ol bus
Then you put some self tappers in it and now we have a cup holder 👌
Yeah go the pulsar wheel.
Can you post a link to the wizzy thing for cleaning? Cheers
Well done mate. Hope the seats work for comfort. I have a Toyota Rodeo 2004 and been looking what to do for seats as the drivers side back adjustor snapped...
Hey mate I own a 2006 Holden rodeo ra and I replaced the stock seats with ve commodore seats, I put the chair rails from the stock rodeo seats straight onto the ve seats and they bolted up perfectly
Legend! I’ll hunt around and see what I can do.
You need a winch bar if your by yourself and get stuck then you can’t get out
Love it already and 3 seconds in
the wheel in the video looks tuffer than the pulser wheel.
I think the pulsar wheel looks better tbh.
Also you need a MINT sticker 😂
I start to make one by following your video,but it's really hard for me😂,I'm doing quite slow,I wish I coule finish it before Christmas
Definitely the Nissan wheel not just for oem look but I wouldn’t want to head butt that After market wheel in a crash god forbid that doesn’t happen but anyways coal is the ultimate rig and those plates are minty af yewwww 🇦🇺👌🏼
Happy you went for the pulsar wheel, and if you chance your mind I’ll buy it off you lol
i found a pair of xr seats just laying around in my shed didn't know they were worth that much geez
Nissan wheel old school looking good great vid
Looks mint
im a fat fuck but i find my GQ seats extremely comfortable and I drove that thing for 4 hours on 1 trip and not a problem, I coulda kept going
Pretty sure you just drove past me I was the shell servo if not there is one getting around similar
Pulsar wheel for the win
Surely you do a suspension installation vid
Love the Nissan steering wheel I’ll definitely be putting the same one in my gq now haha
Do you know if they bolt straight to like factory?
Whats it like daily driving compare to the Nav? Any update when the rest of the suspension will be coming?
Definitely the hectic Pulsar steering wheel
your gunna hate that saas dual gauge so much, i have up after having it replaced under warranty 3 times, i have another one that worked okay but is way out in acuracy
G'day mate out of curiosity did the n15 wheel fit ? I have been considering doing this mod myself but I've seen mixed reports some saying that the gq will only fit up to a n14 and others saying the n15 will fit .
Any feedback would be much appreciated as I'm a lanky bugger and it's getting bit tight in the ol girl.
Cheers
What is that sound when u turn the ignition on, I had it in one of my 4wd but never new what it was? 😂😂
How did you go with the water temp did it work iam thinking to do it now 🤙🏾
Hey mate I know heaps about cars, and I'd definitely recommend the AT wheel you'll be a way better driver.
What turbo kit do you have in there
Is the plastic trim around the gear sticks an original part? My Maverick doesn't have
Won't you get an air bubble underneath the water sensor?
what is that contraption on the end of your air line you used to clean off your seats?
Did you sell ur NP300 . And also great video
Keep it factory, the fast boi steering wheels look kinda tacky. Have a look at getting yourself a modern free floating head unit with Apple car play and Android auto, absolutely changes the look and feel.
Love the content bro
Pulsar wheel for sure, that other one looks too much like race car 🤪
Do you not have to get vehicle cert for changing seats?
Custom door cards bro!! Witch ever wheel will give your sack more space
Damn can only dream of dailying a rig like coal 😍
what size fittings did you use for the coolant temp gauge
hey love your video's. where can you tis dash mat im from Belgium en cant find where i can buy one
💯 the pulsar wheel is heaps better bra
Dont want to be that guy.....but that's not how an EGT probe sends signal mate. Just giving you the heads up👍
It runs using a variable voltage signal of sorts
Thanks for the info dude! I just assumed they where like a fluid inside as the thermostats I fit are almost identical feeling! But thanks for sharing this channel is about learning, so all that info is greatly appreciated!
What was the actual brass fitting for the water temp gauge?
Do you have to do any mod plating for the new seats?
Great vid mate, I reckon you should keep that after market steering wheel on there, looks the goods
Where'd u get the seats bro? I need one in exactly that black grey combo! Run the Nissan pulsar wheel!
Keep your eyes out for old taxi xr6s getting wrecked can usually pick the seats up and because taxis keep their car clean the seats are in good Nick.
If you by second hand what do you expect with the seats?
Go the factory look mate 🤙🏼
Pulsar wheel definitely
What phone mount are you running?
Too late now, but I like the Pulsar wheel better, as it looks factory original
go the pulsar wheel.
I think keep the steiring wheel thats in it not the pollsar one
Run a GU patrol wheel
pulsar steering wheel for sure
go the nissan pulsar wheel
go with the Nissan Pulsar steering wheel!
Nissan wheel for sure!!
What is the aircon like in it? 😂
what brand of gauges did you install?