Magpul B.A.D lever and the MWS Zet plate - how to get proper function (Airsoft)
Vložit
- čas přidán 5. 05. 2021
- if you have an mws it's easy to add a bad lever to it but unless you get a new set plate it's not going to work properly.
#airsoft #magpul #badlever #batteryassistdevice #upgrade #fun #fast #easy #realsteel #tech
![MAGPUL BAD LEVER REVIEW: Does it work?? [HD]](http://i.ytimg.com/vi/yACpSwcLyX4/mqdefault.jpg)
Worth a mention, for those who take advice to wind the buffer tube out one or two turns to make the bolt slow down its return to allow the catch to work, make sure that you pack out the base of the buffer tube with 10p's accordingly otherwise the screw that holds on the top of the gas key on the bolt will come back and crack the top of your lower receiver in half!!!
Agreed that's an excellent point. When I do the buffer tube change video I'll make sure to mention that. Cheers buddy 👍
Excellent video! I saw your other comment about getting one from Hong Kong, I was gonna wait to see if I could get one from UK stocks when one eventually did come in stock, but I guess its worth buying one from HK now, which I shall do.
As yours is gonna arrive before mine and the other gentlemans, do you reckon you could do a tutorial of how to install it when yours does come? It would be a great help for the both of us and very muchly appreciated if you could :)
Yup, no worries it's fully my intention to start digging into the trigger box shortly, and I'll film all of it 😃
@@OllieTalksAirsoft Excellent! Thank you very much, I look forward to it! :)
Hi yes I agree please do a video on how to install it please, it will be a great help as I’ve heard it can be quite hard getting the trigger group out. Just bit the bullet (lol) and just ordered from jkarmy , now the long wait, hopefully it will be in stock like it says it is and bought the GM dust cover to.
@@buff771 GM dust cover is a nice touch, they just sound better. I've also got one of the ravenchrist zet plates on the way, I've not used that brand before so if that arrives first I'll pop that in and see how it goes but the process of installing is identical. The GM one works 100%
What zet plate is that. An u please give us where we can buy it and what brand thanks Ollie god bless you
Excellent video. I’ve been looking to get one of these lightweight zet plates but there hard to get
I ended up ordering from JK army in Hong Kong even though I live in the UK, their delivery is usually pretty slow but it's not too expensive.
@@OllieTalksAirsoft how long did it take as Ive got it in my basket but haven’t pushed the buy button yet lol
@@buff771 last time I ordered it took about 6 weeks 😭
Do you know wether the bad lever touches the lower while the bolt is closed an possibly slightly pushing up the zet plate
not whilst the bolt is closed, only when you use it to hold the bolt open.
How is the bolt cycling without shooting a bullet!? It’s freaking me out and I need an answer for my sanity PLZ!
There is gas in the magazine, as long as there is gas the bolt will cycle. So the BB bullet and the gas are separated in the mag.
The gun will cycle without a BB but it won't shoot anything, also if you only have a BB and no gas the gun won't cycle and you'll get a click.
Hey my dude, I can't actually figure out how to swap this zet plate out, do I have to remove the bolt catch somehow? I can't get my head around it :(
The trigger box will need to come out basically, which includes the bolt catch. It'll raise up about an inch and then you can remove the zet plate. There's a + screw at the back of the trigger box which needs to come out, along with the mag release and trigger box pin.
Don't the bad lever mark and scratch the side of the body? It does on my one :(
Only a tiny bit but I like the "used" look so I don't mind. A bit of electrical tape will prevent any further wear if you're worried about it.
what EOTECH you using and how does it work with recoil?
😬 I have 3 real EoTechs an old 512 with NV, an XPS2-0 and a Green EXPS2-0 🙈
So they deal with Airsoft recoil great 😂 that being said, the holy warrior are also very good and don't suffer POA shifting from hard GBBR recoil.
@@OllieTalksAirsoft lol haha, that sounds expensive 🤣 yeah I have heard about Holy warrior
@@jeppethorsen9282 yeah kinda expensive, I got real lucky and didn't pay more than £400 for any of them, the Green EXPS was a real treat as most real shooters haven't tried one out, but I have... for Airsoft and Airsoft players. lockdown affected us all in different ways. I ended up buying a load of real steel optics, but it's good because I can compare the Real stuff with the Airsoft stuff and actually know what I'm talking about. I love it 😂
I must say old EoTechs the brightness fades but the glass clarity is amazing!! 😍
@@OllieTalksAirsoft yeah cool, could be nice to have one, but hard to find second hand in Denmark
I got a bad lever on mine and changed out the zet plate, but sometimes it locks while i still got BBs in the mag, what should i do to help with this problem?🥺
do you have one mag its happening with or is it with all the mags?
@@OllieTalksAirsoft sometime all the mags but one does seems to have to this problem more then the other ones🧐🤔
I had the same problem with my bad lever and solved it permanently. The part that goes behind the bolt lock button and clamps the lever is actually to think and makes the zet plate rise just a tiny bit by default. Minimal vibrations make the zet plate catching the bolt mid-magazine. What I dad was remove material from that mounting plate. Yes, it gets ultra thin... But it worked for me: my zet plate now rest in the lowest position and the bolt lock button is still free from not touching the receiver. You want a photo of what I did?
Nevermind …. Now I see it’s an air soft rifle!…. I’m so dumb
Lol no worries