XIAOMI PRO SCOOTER FRONT MOTOR WHEEL BEARING REPLACE
Vložit
- čas přidán 10. 04. 2022
- XIAOMI PRO SCOOTER FRONT MOTOR WHEEL BEARING REPLACE
XIAOMI PRO SCOOTER ЗАМЕНА ПЕРЕДНИХ ПОДШИПНИКОВ
#xiaomim365 #xiaomiscooter #xiaomiscooterrepair #escooters #xiaomipro2 #scooterrepair #bearingreplace #bearing
Bearings: 6002 RSH-C3
Подшипники: 6002 RSH-C3
Feel free to support me on patreon! www.patreon.com/user?u=14725906
If you like it, please support by buying the EP at www.northboundsound.bandcamp.com
More music and info also at: northboundsound www.soundcloud.com/northboundsound - Věda a technologie
My front wheel was twitching and making the scooter vibrate uncomfortably. I use it to go to work and I was fed up with the situation.. so I dismantled the wheel and found out that the ball bearing piece was all torn out, inner structure was broken and balls loose. I found this video then proceeded to buy the bearing you suggest, followed your instructions despite having less advanced tools, and in the end I fixed it :D soooo satisfying! Thanks a lot for your video mate!
your welcome! :)
Just the video I was looking for, I want to change the bearings on the front tire of my scooter. and I didn't know how to do it. Thank you very much and I hope to see more videos like this. I would also like to define it.
Please and thank you
Just the video I was looking for the kids scooter has seized front wheel spot on for this 👌👌👌👌
Glad I could help
I've done the exact same thing a couple of months ago, but on an original m365 (non-pro) after about 8k km mark. I reused the old ones after cleaning and lubed them because they were in good enough condition and didnt have new ones at hand. The old grease needed a refresh and dust accumulated in them but nothing major was wrong with them. I do a lot of offroad on it (have both front and back Monorim suspensions mounted) and some really nice 9 inch offroad tires I found here in my country. If I'm not mistaken, I think you actually helped me with the process back then in another video posted on your channel. So I guess thank you for helping me with this! :)
ehh, not worth it to clean, SKF costs like 3 euros, and they are better with water resistant that original ones. thanks for watching 👍 :)
@@RMFUNTIK Back then they were on order from the shop I bought them and had a 5 to 8 days delivery, unfortunately. So I decided to go ahead and try to restore the original ones. To be honest, I was also a bit curious how the original bearings held after so much usage (about 8k km) in the rain, dust and the crazy things I have done with it for the past 4 years. To my surprise, they did well and could be restored. Not perfect but worth the experience I guess :)
Ironically, now I have the new bearings for both front and rear but I hesitate to go all over again with the process of changing them. The rear is easy, but the front wheel is more of a tricky one.
i have my scooter with 7k with original bearings, but i don't ride in a rain or so... it's not hard as with that stupid wire :))
Thanks for showing people how to do it properly 👏🏽
You are welcome.
Ayo Scooter Jesus you are an absolute legend🎉
thank you!
This video gave me the hope i can do it. Finally, it worked only difference both bearings stuck on the axis. Used a 2 arm gear puller to take them down. On the cable side, i used it a bit off centric between screw and axis. But all your steps very helpfull THX
your welcome! thank you for watching!
Благодаря ти много приятел супер много ми помогна, 👍🍻
На здоровье
Excellent tutorial, thanks!
Why changing the bearings? Are they known to fail, why, and how does it manifest?
On a bike it is rare to have to change them.
My scooter makes a clunky noise in the front, maybe it’s the bearings as well.
Because on this scooter these bearings are cheap and not water resistant, most people ride in the rain, that is forbidden, because scooter is ip54 rating...
Finally found the right video took me awhile thank you so much ❤
your welcome
The wheel is nearly stuck I tink its the bearing is it easier to change the bearing or I have a spare scooter would it be hard to swap wheel
@@patrickhartnett6408 swap is easy :)
@@RMFUNTIK thanks alot 🙏
Fantastic Job mate.!!👍🏽
thank you.
Hello, I have a problem, I have a xiaomi pro 2, and I noticed a noise when I braked and when I accelerated, I didn't see anything loose in the suspension, when I went to change the 8.5 tire for the 10'' . when I went to loosen the screws, the one on the right side came out fine and the left one was a little loose, when I saw the door it was a little dusted, and it didn't tighten when I went to mount the wheel on the left side, I'm riding the scooter because I know that the wheel does not fall off, but I bought a wheel with motor and everything to replace it as soon as possible, but I want to fix it, is it easy to change that screw on the axle? or better a mechanical turner make some other thread?
Say whaaaaattt? In two words, pelase.
the bearing that is on the motor is so stuck i can not remove it. i have hammered the same way as you did but it wont come off. any tips on how to get it out? there is literarlly 0.5 mm left and it won't move...
Spay some WD-40.
Just clear and perfect.
thank you!
This video in good ,example how "easy" everything looks in YT. This rim caps are brand new , and the screws are not even dirty or scratched ... Its almost impossible to unscrew those screws
well, i have a bounch of videos with rusty motors :)
czcams.com/video/52ixwXOpENE/video.html
czcams.com/video/wNV7o1k33CA/video.html
everything is possible :)
p.s. and i'm not showing "how to do it" it's not a tutorial.. it's a video where a replace bearings.. if you can't do it by your self and don't have the right tools and knowligde, then don't even proceed and hand over to a proffesional.
@@RMFUNTIK Yes indeed everything is possible. I've fixed my scooter. Not with the help of your videos ofc.
Everything is possible ,but in your case is way more easier (clean /not so used scooter /repair) ,than in real life. One of my plugs (the biggest one ) doesn't go thru the nut, plus like I've said the screws on those scooter are cheap and if they are rusty , its really hard to remove some of them (even with WD40) :)
Peace !
А как разобрать мотор крышка которого была посажена на герметик?
6:19
Are the both bearings the same in size and what are the bearings sizes?
6001 rs
why did he have to take the 4 cables through that nut? what's the point? also that tool that looks like a long screw with the other pieces? do you have to go buy a long screw? sorry I'm not a mechanic, I just bought a new front wheel and going to replace but wondering if I can change the bearings on the old one, only 1500 miles and the bearings are screaming, my first m 365 I put in over 3000 miles and no issues with the bearings, but the pro one is giving me these problems now
to remove the bearing from the lid you have to remove cables..
yes.
yes.
Hi please I need help. If I just buy a replacement wheel already assembled will I need to still re wire and all the king stuff or can I just connect it easily
If the wires are the same color as original, just plug and play.
@@RMFUNTIK if I buy the same model wheel will the couloirs be the sane
@@sweatyonyt_1167 original yes, non original maybe not
@@RMFUNTIK thanks
@@sweatyonyt_1167 your welcome
How do you know when the bearings need replacement?
by sound
Bonjour, ma trottinette xiaomi pro 2 qui vient de passer 2 ans à un souci car elle ralenti toute seule et la roue avant force et ne veut plus accélérer, puis tout à coup elle repart ! Cela m'arrive de façon aléatoire mais au moins 1 ou 2 fois par sortie ! J'ai aucun code erreur ! Est-ce le moteur hs ? Le câble moteur à changer ? Ou la carte mère ? Par où je dois commencer le diagnostique et démonter pour savoir quoi commander ?
Merci à toi pour ton retour et ton aide
Sorry don't speak french 🥖🍟😄
@@RMFUNTIK Hello, my xiaomi pro 2 scooter which has just passed 2 years has a problem because it slows down on its own and the front wheel forces and does not want to accelerate anymore, then suddenly it starts again! It happens to me randomly but at least once or twice per outing! I have no error code! Is it the hs motor? The motor cable to change? Or the motherboard? Where should I start the diagnosis and disassemble to know what to order? Thank you for your feedback and your help.
@@olivierrostaing2922 hmm, maybe it's the accelerator - i suggest you keep riding it until it stops. Then diagnos. Because it hard to tell, usually it's stops with an error beep/led.
@@RMFUNTIK OK!
Dont ever put the threads in a vice 🤦🤦🤦🤦🤦🤦🤦
They aren’t .. there’s a flat edge with no threads that he’s clamping.
🤦♂️
I would put a bolt on it and put that in the wice to protect the thread.
Я ездил зимой и у меня на валу эти подшипники намертво прикепели 😢
Не надо было ездить зимой :)
Is this same as eway e500
They all are a bit the same..
whats the size of bearings
6002 rs
What do you call on you red spray on the last part ? What is the purpose?
Silicon oil , good for rubber to slide
3:50 -16:54 Вы обратно поставили подгоревший фазный разъём??? Разве его не надо было заменить и нормально запаять? Он же дальше продолжит гореть!
как сказал клиент, так я и сделал, все было сказано :)
@@RMFUNTIK Не, ну тогда вопросов нет) Но клиент походу странный персонаж) А эти разъёмы можно достать ведь ?( купить )
ну какие есть.. каждый экономит как может, незнаю на счет контактов, но продаеться вся проводка целиком, думаю эти контакты тоже можно гдето поискать отдельно, я не искал, потому-что не кто их не меняет когда я говорю.. типо пох. :) на сколько я знаю они горели на старыйх прошитых самокатах, на новых вроде нет. Но лично у меня не было такого, что на первой версии, что на Pro 2
@@RMFUNTIK ну говорят горят только тогда когда с завода плохо обжаты.
@@Alex_Verso там провода не менались с самого начала, горит она и на новых и на старых.. все зависит от эксплуатации, у меня лично не было такого, не на старом не на новом... обжаты они хорошо, сколько не смотрел. Я думаю что коннекторы х**го качества, были бы они медные, не было б такого.
I cant get my motor out even after unscrewing all the screws of the plastic cap
Hammer it over ground like I did 6:18
Hello, juste do it, thank you so mutch👍
your welcome!
I did exactly as in the video, guess what? after assembling the cables and the scooter I received the error code 18
well you broke the hall sensor!
Mach bloß deine Hände nicht schmutzig
jawohl
Quel roulement pour un pneu 10 pouces SVP? Pouvez vous nous donner la référence de votre perceuse visseuse BOSCH SVP ? Merci beaucoup @funtik
Sorry no french 🍟🥖
Hi brother, I hope you are doing well can I get your instagram or facebook I want to ask you few questions ?
ask here.