Olá eu me chamo Guilherme sou do Brasil tenho muitos crisoberilo de boa qualidade tenho mas de meio kilo interessa comprar vejo muito os seus vídeos parabéns
Thanks Bob for another very informative video on the calibrated jamb peg faceting. Sadly Bhandasa is not making the machine you are now using any more, but hopefully my home made machine will do the job.
Hi Gary, didn't know BHandasa wasn't making the machines, I know they were quite expensive. The Som machine from Kalpana, India is similar. As long as you are not trying to do competition type cuts I think you will be surprised just how easy it is to turn out good stones.
You must have been doing gem faceting awhile. And I will bet you say that jamb peg is the best and only way to go-looks like it is not for a novice unless the novice has a private tutor named Bob Lakey! Fine job!
Hi Bob, I am chasing parts for a Jamb Peg for a lady. She said there is a horizontal bar with a cheater. Also a piece with a clip on the bottom. Can you please help, even just some good pictures of them would help. Regards Paul
Hi Paul, the only item that matches your description is the table cutting attachment, and only fits the Israeli or Som machine and only available from KMT, kmtjaipur.com/som-brahm-index-head/ I have a website, bobsjambpeg.com/ may give you a better idea of what she needs.
Hi Bob nice video, can you explain more about the numbers on the dip stick what they all stand for interms of which facets the numbers represent,I also acquired a jampeg
Okay-now I see the angle guide you are using--so your method has upgraded from completely impossible to extremely unlikely for me...ha ha ha!!! Actually it is simpler and probably not quite as difficult with some patience...Still, you should be very proud of your skill-most folks would shy away from precision handiwork and for you it looks like a challenge to see how many gemstones you can complete in a short time. Only a master gem cutter can work quickly as you do! You make it look so easy
good morning Bob Lakey, I'm starting to work with lapidation, using a machine similar to the one you use in your videos, I had a lot of doubts and I got in touch with another lapidary and he showed me his videos. I watched it and found it very explanatory, really good, but I still have doubts and I would like to know if you can help me with them. Décio Tadeu Machado Lago From Brazil
Hello Bob, good morning! I hope to find you and your entire family at this time in perfect health, peace and prosperity. I'm a facet cutter in precious stones, I'm in Brazil, I'm looking for a machine like this to buy, it can be used, I don't have a lot of money, so it would be easier for me to buy a used machine, in good condition, and good price . I need to find someone who has one to sell and who will send it to Brazil. If you have any or know of anyone who does, please let me know, I will be very grateful and I can then send you some rough stones as a gift as a thank you. Greetings straight from Brazil Carlos
Hi, I have never seen a used jamb peg machine foe sale. The KMT Som machine is the same as mine and that is the one I would recommend. If you have a base you can purchase just the head, have a look at my website- bobsjambpeg.com
That’s a nifty machine.
Very very good! I am a gemcutter from Brazil. Nice to meet you.
Thank you
Thank you !
Olá eu me chamo Guilherme sou do Brasil tenho muitos crisoberilo de boa qualidade tenho mas de meio kilo interessa comprar vejo muito os seus vídeos parabéns
Thanks for the video!
Happy you watched it, thanks
Thanks Bob for another very informative video on the calibrated jamb peg faceting. Sadly Bhandasa is not making the machine you are now using any more, but hopefully my home made machine will do the job.
Hi Gary, didn't know BHandasa wasn't making the machines, I know they were quite expensive. The Som machine from Kalpana, India is similar. As long as you are not trying to do competition type cuts I think you will be surprised just how easy it is to turn out good stones.
Muito bom 😃 parabéns
Sir Can you teach me to make this machine
@@Mariosergio-fj2kq Thank you
❤ que genial
You must have been doing gem faceting awhile. And I will bet you say that jamb peg is the best and only way to go-looks like it is not for a novice unless the novice has a private tutor named Bob Lakey! Fine job!
I bought my first mast machine in 1967. Been using the jamb peg for the last 25 years....it's not hard.
Me inscrevi no canal. Moro no Brasil e gostei do vídeo. Parabéns
Thank you
Beautiful work admire your skill, btw how long have you been cutting?
Regards John 👍😎🐈⬛🇦🇺
I started faceting about 60 years ago, and have used the jamb peg for the last 25 years
Hi Bob,
I am chasing parts for a Jamb Peg for a lady. She said there is a horizontal bar with a cheater. Also a piece with a clip on the bottom.
Can you please help, even just some good pictures of them would help.
Regards Paul
Hi Paul, the only item that matches your description is the table cutting attachment, and only fits the Israeli or Som machine and only available from KMT, kmtjaipur.com/som-brahm-index-head/ I have a website, bobsjambpeg.com/ may give you a better idea of what she needs.
Hi Bob nice video, can you explain more about the numbers on the dip stick what they all stand for interms of which facets the numbers represent,I also acquired a jampeg
Hi, it's a complete 64 index gear. If you can email me then I can send you a diagram which will explain all.
Bob, would you mind doing a video that explains it?
@@jenrick4804 Have done a website: bobsjambpeg.com
@@boblakey1359 Awesome!
Okay-now I see the angle guide you are using--so your method has upgraded from completely impossible to extremely unlikely for me...ha ha ha!!! Actually it is simpler and probably not quite as difficult with some patience...Still, you should be very proud of your skill-most folks would shy away from precision handiwork and for you it looks like a challenge to see how many gemstones you can complete in a short time. Only a master gem cutter can work quickly as you do! You make it look so easy
That's the beauty of the jamb peg, no gadgets, easy to use and excellent repeatability.
good morning Bob Lakey,
I'm starting to work with lapidation, using a machine similar to the one you use in your videos, I had a lot of doubts and I got in touch with another lapidary and he showed me his videos.
I watched it and found it very explanatory, really good, but I still have doubts and I would like to know if you can help me with them.
Décio Tadeu Machado Lago
From Brazil
No problem, happy to help
Thank you for the beautiful video,can you polish diamond on copper lap?
Cast iron is used for diamonds. You can used diamond on copper laps for many other stones
@@boblakey1359 I really appreciate your reply and your help thank you for the info, I am just starting new.
Hello Bob, good morning! I hope to find you and your entire family at this time in perfect health, peace and prosperity. I'm a facet cutter in precious stones, I'm in Brazil, I'm looking for a machine like this to buy, it can be used, I don't have a lot of money, so it would be easier for me to buy a used machine, in good condition, and good price . I need to find someone who has one to sell and who will send it to Brazil.
If you have any or know of anyone who does, please let me know, I will be very grateful and I can then send you some rough stones as a gift as a thank you.
Greetings straight from Brazil
Carlos
Hi, I have never seen a used jamb peg machine foe sale. The KMT Som machine is the same as mine and that is the one I would recommend. If you have a base you can purchase just the head, have a look at my website- bobsjambpeg.com
What makes is that machine ,how do you calibrate and where can I buy one
My machine is from Israel. Check out Indian faceting machines as there is one called the "SOM", looks the same as mine.
Hello, I am from France. thanks for the video. Which machine has the same quality as the bhandasa?
Check out Kalpana Machine Tools, best I've seen so far.
@@boblakey1359 thanks you.
Cuánto es el valor de una máquina como la q usted presenta
This machine made in Israel, quite expensive. I would recommend checking out the SOM jamb peg made by out KMT Jaipur,
Para mí está herramienta no es segura en los ángulos, por qué se pierde la hubicacion
It's a jamb peg, they don't have protractors
Hello Mr Bob,
What is the best country to go to learn jamb peg technical faceting ?
Thank you very much for all vidéo
Hi, probably Thailand but you can get enough information from youtube videos, Get your machine and start cutting, best way to learn.
@@boblakey1359 Thank you for giving me time, now everyone is waiting for your first videos on learning JAMB PEG FACETING
@@dioufali2288 I'll try to do something which will get someone started with my style of jamb peg.
@@boblakey1359 🤲🏼
I need ony this hand pcs or (facter) how i order?
Check out Indian faceting machine suppliers
Onde posso comprar a máquina?
Original from BHandasa Engineering Israel or very similar from India - Kalpana Machine Tools
Hi, could you please provide a diagram on a trilliant cut design?
You need a 48 index dop, then use any trilliant design.
@boblakey1359 sorry, I meant for a jambpeg machine.
How are you, Sir?
Can you teach me to be this machine?
Check out my website, bobsjambpeg.com