MASTERING like PRO in Logic (with only STOCK PLUGINS!)
Vložit
- čas přidán 29. 06. 2024
- ‼️ Download the free 6-Step PRO MIX Checklist here: www.thebandguide.com/logicpromix ‼️
🎤ALL the Gear I Recommend: sweetwater.sjv.io/eK2VZX
Headphones I LOVE:
🎧 Beyerdynamic DT770: sweetwater.sjv.io/AWQJgj
🎸Win free gear: sweetwater.sjv.io/KjGVOy
Some of these links are affiliate links, meaning it won't cost you any more and a small percentage will come back to support this channel
---------------------------------------------------------------
If you're struggling with mastering in Logic, this video is for you!
#logicprox #logicproxtutorial #logicpro - Hudba
‼ Download the free 6-Step PRO MIX Checklist here: www.thebandguide.com/logicpromix ‼
🎤ALL the Gear I Recommend: sweetwater.sjv.io/eK2VZX
The first person that explains everything so well and easy, so helpful. Thanks a lot!!❤️
Colin, you are a rare gem on CZcams, actually useful content and information. I've gotten lots of value from so many of your videos
That's high praise! Thank you! 🙌🏼
@TheBandGuide most content creators are 95% filler and 5% useful content (if even), thank you for not being most content creators. Hope your channel grows. You deserve it.
Agreed!!
Thanks for this video, I have just finished a master of a song I mixed using your technique - I'm super pleased with the result and my master sounds way better than the Logic Mastering Assistant plugin. I have mastered tracks before with varying degrees of success but never been happy with them until now. Your approach is more musical rather than using multi band compressors etc where I found myself going around in circles, looking for numbers, getting frustrated and eventually loosing my ears and mind lol! Great video and I encourage anyone to try this method - it really brings the focus back to the most important thing - using and trusting your ears!
Colin, recently switched from GB to Logic. I will be mixing and mastering my first Logic project soon using your step by step videos. They are fabulous.
Linear EQ:
Lower 200Hz subtly
Tube EQ (for low and high boost, adding warmth even at 0):
Low Boost: ~1
Attention: ~0.5
Low Freq: 60 Hz
High Bandwidth: 4~5
High Freq: 6 kHz
High Boost: 3.5
High Atten: 0
Compressor (in Dual Mono Mode to make it react to the left and right slightly differently):
Enable L/R couple
Autogain: Off
Mode: Vintage VCA
Attack: 30-50ms
Release: 50-100ms
Makeup: 1.0 dB
Gain reduction: -1 to -3 dB maximum in the meter
Adaptive Limiter 1:
Mode: Stereo
Remote DC Offset: On
TP detection: OFF
Gain: 3.5 dB
Out Ceiling: -0.3 dB
Lookahead: 50ms
Adaptive Limiter 2 (trick to add dBs):
Mode: Dual Mono
Remote DC Offset: Off
TP detection: On
L/R Couple: Enabled
Gain: 2.0 dB
Out Ceiling: -0.3 dB
Lookahead: 50ms
Multimeter Goniometer:
LU-S around -6.5 (pop), -8.0 (rock)
Thank you so much for this series. It was really very helpful 🙏🏻💯♥️
Followed from Step 1 and loved every bit of it! Thank you for all the help and info!
love these videos! thank you 🙌
Thanks for this video, You make the mastering process very easy to understand! Your channel is my go to for everything in Logic man!
amazing video ive really learnt so so much!! well taught sir!! Huge fan!!
Really great! So helpful. Thanks.
👏👏👏👏👏 You are really good bro! As I was following your explaining, I was like: he does a really great job covering details! Thank you so much! This is my first video with you! I will definitely be looking through your channel !
This video helped me a lot. thanks!
This is great! Thank you!
Glad it was helpful!
you're truly goated my friend - thank you.
Thank you for this amazing video, much appreciated.
Glad it was helpful!
Thanks Colin definitely helps 👍
Thanks for your works. It encourages me to make music.
Great vid super helpful
Bro, your videos are easily the best tutorials on here. Good shit. Clean, simple, easy to understand.
🙌🏼 appreciate you!
Can you put a step by step guide of the mastering process. I know it was just one video but it was very helpful to know the plugins you were using even though I know it varies
thank you jason sudeikis
You found me out...
Thank you 🙏🏽
Linked mono is a great idea. I'm going to try that.
So good. And using stock plugins. So many others using all kinds of ££ stuff in their vids. Yours is actionable and achievable. 😁
I think your mastering is fuller, sure it's louder too, but that's not the point. It is also clearer and punchier. Thanks again for your helping us all to mix and master better than we do.
Glad you dig it, Raimo! And great point about the loudness
Hi Colin, wonderful content as usual, just a little confused by the dithering option being selected when you exported the master out. I assumed dithering was only selected when exporting at 16 bit for CD use. Am I missing something? Thanks again for another amazing video 😊
As usual, this is a great video and I've learned more from you. Question: You have been using this same song for a while now, could you do some of these videos with a different genre of song so we can hear how these techniques work on different sounding songs? Don't get me wrong I love your song, but it is a hard rock type song. I do a bunch of songs of different genre's Country, Folk, Blues, etc, and I'm getting decent results from what I've learned from your videos and training, but it would be helpful to hear you apply them to different sounding songs.
Great idea, Terry!
love u😍 channel!
🙌🏼🙌🏼 Thank you!!
Dude your videos are the best thanks for giving your knowledge. 😊
Thanks, man!!
Colin, I like your mastering better than Logic's AI. Love all the information in this video. Thank you!
@TheBandGuide what do you think about the own mastering with additional mastering assistant at the end? Do you have experience with this mix of both ways? Thanks a lot for this explanations, great!
at 7:42 A/B Swap Solo
hold OPTION while clicking the solo buttons
I'm curious, why you didn't use any clipping, phase checking, limiting in the mixing, and stuff like that
How do you export your mix into this format to begin your mastering? Thank you so much
I was wondering, why did you choose not to do any mid-side processing on your master? Thanks.
How to you get pro masters to put in as references?
so my mix is balanced but when I exported I noticed it started clipping?
Hey man I’m having trouble trying to control the low end on different systems, my song sounds great but if I boost my low end to get a more punchy and professional sound on headphones, it ruins how it sounds on speakers by overwhelming the bass. Why can’t I get my songs to sound as loud and clear as professional artists without running into distortion?
why do your reference track waveforms look so full yet the waveforms on the song your mastering not match?
what song is this
I have tried to like some of your videos twice and it erases the like too
Yeah definitely only like once! Or three times... or really any odd number, I guess?
funny guy...hit dislike twice
😂
Thank you