Thanks for the great video! I had the carb pulled, cleaned, and reinstalled in an hour. One helpful tip is using a high E string from a guitar to clean the jets.
Good job, just FYI those hoses running thru the front bottom are the coolant lines, no big deal though. My Starting Enrichment Valve (the over complicated choke) is toast, ordering a cheap carb off Ebay and will just take the SE valve off the cheap knock off carb from Ebay. $50 for a knock off carb as opposed to buying the SE valve from Honda for $70. Also there is a restrictor plate in some Metro's,on the engine side after the spacer and metal housing that is bolted to the crank case with 2 bolts, take that plate out they say will give you 5 more MPH.
Unclogging jets can be done by taking a single wire off a bicycle shifter cable . Just use a pair of pliers and slowly push and turn about a quarter of an inch and it should work its way in . We got ours all the way through and then held the one end of the wire with a vise and the other end of the wire with pliers , then shuttled the jet along the wire back and forth to open it up more (ours was really clogged ) . I dont think the bicycle brake cable will work because it is too thick.
Thanks for the great video! I had the carb pulled, cleaned, and reinstalled in an hour. One helpful tip is using a high E string from a guitar to clean the jets.
Awesome video! Thanks for sharing. Getting ready to do this now.
Awesome video. Same jet was clogged on mine. Soaking it now!
Good luck! Glad to help.
Good job, just FYI those hoses running thru the front bottom are the coolant lines, no big deal though. My Starting Enrichment Valve (the over complicated choke) is toast, ordering a cheap carb off Ebay and will just take the SE valve off the cheap knock off carb from Ebay. $50 for a knock off carb as opposed to buying the SE valve from Honda for $70. Also there is a restrictor plate in some Metro's,on the engine side after the spacer and metal housing that is bolted to the crank case with 2 bolts, take that plate out they say will give you 5 more MPH.
Thanks for the input.
Unclogging jets can be done by taking a single wire off a bicycle shifter cable . Just use a pair of pliers and slowly push and turn about a quarter of an inch and it should work its way in . We got ours all the way through and then held the one end of the wire with a vise and the other end of the wire with pliers , then shuttled the jet along the wire back and forth to open it up more (ours was really clogged ) . I dont think the bicycle brake cable will work because it is too thick.
Nice trick to know. Thanks for sharing.
What did you soak it in? What is the substance? Can I buy it at the store? Sorry first time going to try this! 😬
Carburetor Cleaner
How did you get the slow jet open?
We have some fine files that fit in the openings. The files we used are usually for oxy acetylene welding tip cleaning.
16:49 HAHAHAHA he said deez nuts
Glad you liked it.
@@weekendwarriorgarage4402 he really likes deez nuts