I've had a Taotao for almost 2 years with no problems. Changed oil when needed, fuel filters, etc. Oil used was always full synthetic, fuel was always 91 octane, and spark plugs were NGK. No problems and still runs great. Take care of it and it will serve you well.
mandapalque I wouldn't call it luck. I have always garaged it, wash it at least once every two weeks, and take care of maintenance when needed. I also don't ride it hard and I don't ride it every day. I usually ride it 4 days out of the week, and usually put about 80 miles per week. I've had very little issue.
Jon Bee I respect your point of view. However, when I scooter out of hundreds is good I have to call it great luck. As I said: I have worked in 2 scooter shops and all this brands that this guy mentions at the biggining are very bad quality compared to honda, Yamaha, Suzuki, piaggio, vespa etc...
I bought a used 250 Chinese scooter that didn't run for $700. I know taken a chance, but I got a new battery from local fleet farm for 30 bucks and a new carb from amazon for 35 bucks. I put the new parts in and tried it and it started right up and runs like a champ it does 65mph down the highway with no problem. The only complaint I have is the plastic body parts they are cheap and break very easy. So this is my thought on Chinese scooters if you can work on them yourself and enjoy it get one but if you can't get a Japanese scooter.
When I bought my 150 cc Chinese scooter 11 years ago I just picked one in the shop. I had no idea of which ones were good or no good... for about 7 years I let the mechanic do the service and fix problems that just got progressively worse. I realised I had to do the maintenance myself in order to ensure it was done right. However, 11-12 years down the road the scooter is still running fine, actually it runs better now than it ever did during the first 7 years. When it comes to vehicles my Chinese scooter is probably then best vehicle I've ever owned in terms of reliability. Spare parts are cheap and easily available. The GY6 motor was designed by Honda so it is durable and free of design flaws.
I did a ground up rebuild on my 250 Chinese scooter. Because it's a Honda clone motor I can replace any "iffy" components with higher quality stuff. And speaking of maintenance, my mechanic charges reasonable rates (I see him in the bathroom mirror every morning LOL!) So now critical parts such as engine valves, the starter clutch, starter motor etc, are all OEM Honda.
I've had my Peace Sports moped for over 2 years now, and this is my first owned moped. I had 2 other ones but different colors (used), but one got stolen, and the other one totaled due to an accident. This particular brand is pretty reliable in my opinion, didn't have too many major problems aside from replacing a few small parts during the first year. I got mines from my local dealer, brand new, for $675 since they are cheaper at the end of the season. Within the 2 years I had mine, it instantly got rusty and some bolts broke off since I live in an apartment and have to keep my moped outside, exposed to all the elements.(really annoying always finding spiders and other creepy crawlies making my moped their home lol.) But as long as it gets me from point A to B I am happy.
I have a cheap baotian classic aka Tao Tao 4 stroke and two things YOU must do is 1 change the oil every 1000 km and 2 check the valve adjustment when they get hard to start, 4 years on mine and not one breakdown!
I own a TaoTao clone, and was fortunate that it had the Japanese carb. I can say it runs great (and for the better part of 3 years of a lot of riding - I daily ride) it's been a great scooter, I've had Wild Hogs in both Lk Mary and Winter Park do my service (and a couple of repairs), they always treat me well, they give me an estimated time to finish, sometimes I just wait around for it and sometimes I come back and get it... they always have done me right. I will buy my next scooter from them, just haven't decided which one I want next.
I had one, don't remember the brand, bought off the 'net; it worked fine for about six months, then suddenly stopped. I never did find the problem (I'm an AMI grad,) and finally sold it. The buyer told me the problem was a "black box." (Sure enough, I don't have an electrical tester.) I'm kickin' myself, but I'm also very leery of any Chinese engineering --scooters, guitars, you name it. How I miss the days when things in stores were mostly marked "Made In USA."
Just ordered a Tao Tao Powermax 150. All scooters-maxi scooters- bikes- cars- trucks-atvs etc. Are what they are including the name brands. You have to keep up with the wear and tear. A decent mechanic can make one last for years on end while others just use and abuse them and replace them. I researched the Tao Tao Powermax 150 and it will fit my needs until I can afford to go with what I wanted (Honda PCX 150 or Suzuki Burgman 200). Great coverage and thanks.
ive had my taotao 150cc for over 4 years and no problems very reliable, of course i always take care of it with maintenance, i think as long as u stay on top of maintenance they will last
My dad bought a Propel Daytona 150cc scooter 9 years ago and gave it to me almost 4 months ago. I've had to replace the carburetor about a month ago, he's had the brakes overhauled last year at a local shop that actually sells them also. So I kept taking it to the same shop.
The other thing that is a bit confusing is how many of these "brands" seem to roll out of the same assembly lines located in places like Zhejiang province. I grew up knowing that a Mercury Marquis was just a rebadged Ford Crown Victoria. I can deal with that. But Chinese branding appears to be much more fluid, and with clones of clones of clones, apparently manufactured with hand-me-down dies and machining, knowing what kind of animal you're buying gets to be a little problematic.
I have a 2011 taotao I bought off Craigslist for $350 in basically new condition with 450km on it and it's been the most reliable one I've owned.. and there have been many over the past 15 years, including a ruckus! The only thing I've replaced was the carb when it wouldn't start after I let it sit for a month or two. It's now up to around 2000km. I ride 20 miles to work and back every day plus local errands and rides for fun. It's surprisingly good. Local shops won't service them but the place down the street carries parts so it's not all bad, I don't mind doing a little work here and there and there are videos for everything on CZcams. There are definitely some lemons out there but if you get a decent and keep your expectations reasonable, they can be a great deal. Insurance is about $100 a year and registration is $6 for three years in Colorado.
i have one powermax 150cc 6 years still runs like new after 25,000 miles i changed the engine oil, still factory transmission gear oil, belt, brakes, bulbs
Wow brother what a great guy you are, I'm from Warwick Rhode Island, and I wish your place was somewhere over here cuz I would definitely do business with you.
Andrew, I will be coming to your store this week to look at a Tao Titan. So nice that we can find a dealer that has several of the scooters that we see online but can actually touch and sit on. look forward to seeing you guys.
I have MAYBE $600 in my tao tao. Bought for $350 with less than 1000 miles from the orginal owner. It now has a 23 inch windshield, alarm, remote, windshield, brush guards, tool bag, new batt, new clutch ,new variator, new fluids, spark plug, big bore kit and paint. It went 45-50 mph without the kit.Yes I said 45-50 mph.
I've been looking for a trike style scooter and issue there is one trike conversion kits are expensive and the only companies that offers trikes are all Chinese, luckily I've found a couple of dealers not far from me that sell them.
@@profitmonsters8186 I am interested in Chinese made adult mobility scooters, especially gasoline or propane powered. If possible, please let me know of a responsible US dealer. Thank you in advance. I think that you are serving an important niche market.
love the video my friend but have learned in the last 5 years their is no good brand or bad brand only scooter built for cheap price and built for high price. I say this for the fact 99% of scooters in the us are made in china yes people even you name brand like Honda come from china and most scooters come from the same place factory. I recamend you pay the extra money get better build quality and get a scooter that has as little plastic as possible most companies now days use cheap plastic theat will break over time. the best scooter to buy right now is a vespa mid or upper price or a Honda ruckus. I used to recament genuine scooter companie but now they started using crap plastic. me I work on scooter so I can fix then and no the parts so I buy tao but do not recdamend them.
Thanks for the heads up ! I was going to buy a 150cc chinese scooter with a name i never heard of because it's under $1000 but now i think im going to save more money and just get a good one 👍.
I can indorse my Tao Tao 50 brought it new in So Florida. And the warm climate helps. New Nov 2018 $700 now have 3,449 KM and running strong. You must run your Tao Tao everyday the more you run it the better it will be. The only issue was the bulb, low beam went out. Now, I'm looking to upgrade to a 150. Vespa $4,000+ Visited my Tao dealer they putting together the 2019 150s ? $1.300 out the door. What do you think my choice will be?????
Bought a scooter off someone that wrecked it and when they wrecked it they broke the mirror and having issues finding a place that might be able to work on it.. tried using the jb welding stuff but its not helping
Enjoyed your vid, thank you. Bought a new Genuine Buddy 50 two weeks ago, in Florida, and I'm loving it. Getting it decked out with strobe lights (and maybe even a fart machine) so that hopefully other motorists will keep their distance and prevent forest fires. Something like that... Anyway, I'm sure you've gotten over your cold by now, so go ahead and have a Happy Chanukah.
So how much is your cheapest 50cc scooter? Does it have a gy6 50cc? I'm guessing $1200. Does it have the same engine as the $700 scooter online.Yes. It does. Does it use the same bulbs? Yeah. The only difference is you're gonna talk to me for a little bit and change the bulb that day for an extra $500. I like how you admitted your scooters are just as bad and parts fail. The only differences in the scooters are the body parts and a few stainless pieces, nuts and bolts.
Tall rider here, can use some help. I'm 6'-4", 220lbs. No dealerships in my area so I'm going to buy online. Looking at the TaoTao or BMS brands. Any other Tall riders have any experience with the models of either of these companies. Thanks in advance for the help.
@@Mybwaincoming from someone that doesn't own a scooter and has never dealt with means a lot . If you have to go to the dealer for little problems...yes you will have a problem with basic maintenance.
Yes. That's probably for the best. You didn't have a point or any real life experience to back up what you were saying. Talking about going to the dealer when you've never bought from a dealer or even owned a scooter. You are just assuming the dealer going to help you out free of charge. Have a nice day son.
Are you are posting comments and deleting them just to send me messages? You better drop the attitude son, before I take away your internet privileges.
You give very solid information which was great to hear, but then I checked your website and you’re expensive! The Jonway Roadmaster 150 you have at $1,499 is $998 in Memphis Tn. for the exact same scooter. Folks shop around...
Thanks for the comment, I actually don’t own that business anymore so they may have increased prices, I was a franchise store, also different locations and supply and demand could be the reason for different prices. I don’t even think jonway makes that bike anymore so the $998 price could be an old model clearance price
So I’m lookin to buy a scooter and I was just wondering if any of y’all think that tao Tao is a good brand, because on a lot of the videos I watched and reviews I read they said that they where good for the price ,but you will need to Change some of the stock parts(tires,belts,tubing,etc) They also said if you know nothing about tools or mechanics to not buy one cause they will need a lil but of work. So really I’m just wondering if it’s a decent scooter for the price
in my country we have the consumers guarantee that the seller has to honour, the three Rs repair, replace, refund, dealers are given the option to repair the scooter within a reasonable time, if they cant then they replace it, if there is not a replacement available they have to refund, as you will make out by this, those brands that broke down were sending the dealers into insolvency so there is only a couple of dealers left selling brands that are specific to them. one is Other and one is Roma they both use the same mechanics, honda clones, just different plastic body panels
I have a question I have a 2015 piaggio 50 cc I want a bigger and better carburetor I know you mentioned Japanese carburetor what can I replace mine with?
A dealership will snub u when it come to Chinese scooters. Those Vespa and Buddy 50cc are around the same price as a motorcycle. My 150cc Chinese scooter runs great for $1600
Like most things mechanical in nature, they will work at their best and last longer if the preventative maintenance is done as required. You covered a lot of important point in your video...run synthetic motor oil...and change it frequently. These small GY6 motors do not have screw on oil filters like a larger traditional motorcycle does. It's just a small mesh screen that is cleaned and reused with every oil change. All the more reason to be changing your motor oil regularly. Also, upgrading things like the battery, air filter, spark plug are all inexpensive and easy to perform. I especially agree with your comment about avoiding internet only dealer. That's definitely asking for trouble if you ask me. There's a guy who posted a video of his Roketa 150 that he put 26,000 miles on within 2 years of owning it. czcams.com/video/26R9wzXqME4/video.html . With that kind of mileage, you can't possibly find cheaper transportation, short of taking the bus.
I need some help. I’m here in the Dominican Republic and looking to buy a scooter to get around in the city. This small store is selling a Tauro BZ 150 Plus scooter. I’ve looked all over and can’t find any specifications on this make and model. I know it’s a Chinese made scooter and that somewhat makes me hesitant because I can’t find any specs. And after watching your video, I’m concerned about quality and reliability. Any info you have on this make and model would be helpful. Or if you can point me to a website that I can get all of the details that would much appreciated.
How is Znen scooters buddy? Especially how is Znen T9 ? I am having the mahindra gusto 110 cc which i bought by 8 months ago. And its a very good bike indeed. But suddenly i got interest to buy the Znen T9 and i am confused little bit
if you ever have contact with johnway scooters produted in china dont do it. ater one year only lights that still worked was high light not the normal light and the break lights. turn lights have worked for two days and that was it. i have drive the scooter for one year random just drive a bit for the fun 1500km after a year is not drive a lot. starting with starter you can forget it. kickstarter one kick and he runs. good i have that kickstarter. but when it is a bit evening i cant because the lights not working.
Have you ever heard of Chongqing brand? Bought one used and want to know how to do maintenance on it plus any upgrades I can do such as power it up on the motor side over the 50cc (I'm a bigger guy compared to alot of guys, 6' 3" 310lbs.) I do all of my own automotive repair, etc, etc. I would like to find some websites that are legit to where to find parts, etc. I am open to Modding some stuff. I think I have the Gy6 motor. The "Rup upgrade" you guys do sounds good and would be a good investment it sounds for my scooter. IF you reply back with contact information I can contact you and see what we need to get this work going on mine. I have two little round headlight bulbs on mine and would like to upgrade to LED bulbs if possible for two reasons. Better vision at night and when idling vs driving the headlights are dim then brighten up. This isn't generally the case with LED lights I've found on regular Automotive vehicles such as my Chevy Tahoe (05) and Chevy Impala (06). The Tahoe I am original owner on and the impala was a fleet vehicle before I bought it a year old with 40k miles and enough warranty left to get about 3k of stuff replaced the first week after I bought it as some stuff came up and the dealer was able to squeeze them thru as warranty. Let the replies roll in please. OH the model number on my scooter is MP-050C-JCL which is the stickers on the side.
Also I noticed it listed the oil types to use but in the video you confirmed what I wondered about which was that they could use Synthetic Oil. The engine oil on the moped is listed as 15W-40 which was what we'd use in semi trucks when I drove for 13 1/2 yrs up until 10yrs ago before going on disability due to back issues. I'd worked on class 8 semi trucks, trailers, welded trailers, trucks, gas tankers prior to that after coming out of the Army in late 1993. I'd also like to find a heavy duty shock as I see my shock is leaking oil which had I seen before that I would've bargained more. I feel kind of robbed at paying $480 and then 3 days later buying a battery. I won't have to get it licensed but will just have to transfer the title.
How do you feel ability Taiwan made engines? I hear that the quality is much better than their Chinese counterparts, any thoughts? Thanks for the advice.
I got my 2006 Honda Metropolitan for $700 on craigslist. It was sold to me with 10,000+ miles, running slow, and was backfiring, but all it really needed was an imitation honda fuel pump and fuel filter ($20), a Briggs and Stratton Air Filter ($8 at Lowes), an NGK iridium spark plug ($8 at Amazon), and I went ahead and oil changed the engine to Royal Purple 10W-40 synthetic oil (+-$10), and the Gear Oil to Mobil 1 ($20). Registration in New York costs $6.50 per year, and progressive scooter insurance +-$100 a year. I'm now at 11,000 miles running strong, always pumping 93 octane fuel. And everything totalled to less than $1000, and gets me about +-90 MPG. In my opinion, get a Honda Metropolitan. My TaoTao is VERY problematic with starting, Carb cleaning, and all the other cheap sh*t and complications going on. Mind you, I'm not really mechanically inclined. The TaoTao was a headache, and failed me more than a handful of times, and Honda is real pleasure to own.
Don't listen to everyone who insists Honda or Yamaha only. Genuine makes great scooter, as do SYM and Kymco and much cheaper than the Japanese brands, they are just as nice possibly nicer. My SYM was much quicker than my friends Honda having the same cc's
I just bought a 2008 Xingyue 260cc with 3500.. How reliable is this brand? And what causes a scooter to over heat quickly? I bought it for $400, knowing I was need to put some money into it. Thanks!
Branzilla 17 You may have a little trouble finding parts for it just because it’s an older model, I would definitely make sure that there’s a dealer or a scooter shop in your area and I can fix it if you have any issues. As far as overheating it’s most likely either a radiator issue a temperature sensor or the thermostat that’s bad and it probably needs to be replaced
Best to buy any scooter from a dealer. A lot of the mail order in the crate "put it together yourself" deals from China end up having problems with fraudulent factory titles, and you have a heck of a time putting it on the road with your state DMV.
Wild Hog Scooters, ha I love it. Check out my Wild Hog Scooter it looks like a little Harley! 150cc California Scooter Company made these to copy the old Mustang. With the Running Lights and Windshield they look just like a mini Harley. But I've got about 5 grand in it.
High octane fuel is for high compression engines only. It does not improve power. If you have a low compression engine and you run high octane, it is a waste and over time will ruin your engine. If you’re spark plug runs hot, then higher octane might be needed as you want to prevent engine knocking. These 50cc scooters run fine with 85 octane. High octane does not mean more power!!
It's the ethanol in the lower octane gas...premium octane has ZERO ETHANOL....which eats up your gaskets hoses vacuum and fuel lines etc....pay attention dude!!!!
part 2, i decide to fix the lights at myself because the service in our country says i have waranty on the parts not the working hours. and if you know they asking 55 euro per hour wath means to expensive if i let do it to them. so i grab me a Screwdriver and started to find how it goes. after almost a half scooter dessembled to get on the lights and breaking some paper plastic the lights are ok. it seams relay etc.....
Hard to tell? someone want the mother other the daughter?? I have had a Kymco Agility 50ccm it is made in Taiwan with a Gy6 engine on, goes wery good, the engine is a Honda engine, made on licens in Taiwan, and it is a very used engine today on most scooters,even them from China. Kymco maded the engines for Honda too. Today i have a used Chineese scooter, VGA called here in Denmark, it is a 2 stroke, goes tarrific, it is a Longjia built, but a big dealer here sold them as his own brand VGA....The world has chanced-when i was young we had several Moped factory´s here in Denmark......but it`s over....
If you have to change the carburetor on a Chinese scooter with a Japanese made one, you're better off just buying a Japanese scooter. Seriously, avoid Chinese made scooters as they are crap, will cost you more money over time, and are made out of low quality parts that will put your safety at risk.
Are you still in business? I don't understand why anyone looking for a Chinese scooter would go anywhere other than a reputable place like yours with excellent after service!!
I am wondering the same thing - I really like the Geely St Marlo 150 cc but I don't see very many American dealerships who sell this type of product. Is anyone in this forum familiar with this brand?
part 3: i can go on but i'm warning dont sell them to customers if they ever contact you. they gonna give you a lot problems and they dont have any solutions for it. be warned. dont forget johnway scooters is the name. bad bad bad bads. back to german scooter 12 years whitout any problem.
don't buy from wholesaleATV or mopedmotorsports, which is the same company. I paid in full and waited 5 months, then they called me and admitted they didn't know when I would get my scooter and the news was not good. then they charged me almost $100.00 for restocking fee. THIEVES. THEY DON'T DARE CHALLENGE ME, BECAUSE I STILL HAVE ALL OF THE SCREENSHOTS AND PHONE CALLS SAVED. I WOULD LOVE THEM TO TAKE ME TO COURT. EVERYTHING I AM SAYING IS TRUE.
Wayne Hall yes I've heard of them! They're pretty good and most parts are universal and easy to get online or at any local shop. Just take care of it and do all the services that are recommended
Wayne Hall yes I've heard of them! They're pretty good and most parts are universal and easy to get online or at any local shop. Just take care of it and do all the services that are recommended
Wayne Hall yes I've heard of them! They're pretty good and most parts are universal and easy to get online or at any local shop. Just take care of it and do all the services that are recommended
Simply! Get baotian! Just get a new battery for 30 bucks. And cheap solder iron and electrick tape to secura all wires... dont fall at that carburator shit, just fucking drill it so you have full access...(pro tip if thia is legal in ur area: drill these litle valve thinks to larger=more power) and a simply remove that big bulgy ground stand! You will safe shitton of cleaning if you do so.
Lol no thanks. I'll spend a fraction of the money to buy a cheap bike and ride it around. Only issue I've ever seen is people who don't know how to turn a wrench never servicing them before
1. Foreign motorcycle companies are banned by the Goverment, so companies like Yamaha has to produce their motorcycles through a joint-venture company in China. Models that these company produce could be better than those that the local Chinese company do. 2. There are a few models with electricity-spraying fuel system. 3. Super cheap, cool and useful accessories could be found on Taobao. 4. Don’t buy any motorcycle on Taobao, you never know if it was built in someone’s garage with a fake certificate of compliance. 5. Chose models from the portfolio of a well-known company (do the research), then find a local dealer with contact to that company.
Peace sports are crap, I have one, I work on them, I worked on a scooter shop. They break, they leak. The shocks, bushings, are bad. Basicly very poor quality.
mandapalque “break” is the proper spelling, and i have to disagree because I sell them everyday. I also have s great relationship with the company and any issues we have are always taken care of my peace sports. I’ve never in 5 years had a shock leak. Most issues people have with any Chinese scooter is lack of service, negligence and riding the crap out of the scooter.
Wild Hogs Scooters you sell them, you are going to defend them. They are crap compared to Yamaha, honda, kymco etc. I have worked on 2 shops and I own a peace sports. They are crap. The plastics brake so easily. The engines leak, period. You have to replace the oil retainers. Lucky for us there good like retainers out there. Leave a peace sports out side with the sun every day for a hole year and compare it with a yahama Zuma 125. Wolf brand scooters are better. But all the names you mentioned are very bad quality. Warranty??? If customers don't do the oil changes with the dealers they loose the warranty if there is any. Oil changes: 50 dollars. I can change my oil my self for 5 dollar with synthetic oil. 50 dollars x 12 months is 600 dollars. That warranty is BS. If someone wants a really good scooter go with big names. If you want to have a lot of problems buy a chinese.
mandapalque you are entitled to your opinion, a $799 Peace sports scooter you can not compare to a $2500 Honda or Yamaha, I agree that that are not too quality by any means, but we would be out of business if they were that bad as you describe.
Wild Hogs Scooters it is not my opinion: it is my reality supported by experience owning 2 150cc's. And by working on 2 shops. The only good ones are wolf brand scooters if you want to stay with GY6 engines.
Wild Hogs Scooters they are super friendly price wise and parts price wise. I love my GY6 engines. I can show to you a complete dozen of scooters from my friends with plastics broken. Engine s don't leak anymore cz we fix them. I do tell people they can buy Chinese scooters, but if they do not know or want to work on them I tell them go with great names.
sam3d because the ones I sell, I have a good relationship with the distributors and can get all parts to fix them and they really don’t have that many issues at all. We sell tons of scooters and not everyone can afford a $3000 Honda or Yamaha 50cc
maybe...I've owned a Lancer for about a year. If you maintain it and replace the parts as needed it could last you a good while. Key word there is "could".
I've had a Taotao for almost 2 years with no problems. Changed oil when needed, fuel filters, etc. Oil used was always full synthetic, fuel was always 91 octane, and spark plugs were NGK. No problems and still runs great. Take care of it and it will serve you well.
Jon Bee you are lucky your plastics fairings and headlights haven't faded. Lucky your plastic fairings haven broke apart.
mandapalque I wouldn't call it luck. I have always garaged it, wash it at least once every two weeks, and take care of maintenance when needed. I also don't ride it hard and I don't ride it every day. I usually ride it 4 days out of the week, and usually put about 80 miles per week. I've had very little issue.
Jon Bee I respect your point of view. However, when I scooter out of hundreds is good I have to call it great luck. As I said: I have worked in 2 scooter shops and all this brands that this guy mentions at the biggining are very bad quality compared to honda, Yamaha, Suzuki, piaggio, vespa etc...
Well said Jon, mine has 14000 km and running strong
wow cool
I bought a used 250 Chinese scooter that didn't run for $700. I know taken a chance, but I got a new battery from local fleet farm for 30 bucks and a new carb from amazon for 35 bucks. I put the new parts in and tried it and it started right up and runs like a champ it does 65mph down the highway with no problem. The only complaint I have is the plastic body parts they are cheap and break very easy. So this is my thought on Chinese scooters if you can work on them yourself and enjoy it get one but if you can't get a Japanese scooter.
Yes the plastic bits keep breaking
There's no dealers anywhere near me so checking in a dealership is off the table, lol!
When I bought my 150 cc Chinese scooter 11 years ago I just picked one in the shop. I had no idea of which ones were good or no good... for about 7 years I let the mechanic do the service and fix problems that just got progressively worse. I realised I had to do the maintenance myself in order to ensure it was done right. However, 11-12 years down the road the scooter is still running fine, actually it runs better now than it ever did during the first 7 years. When it comes to vehicles my Chinese scooter is probably then best vehicle I've ever owned in terms of reliability. Spare parts are cheap and easily available. The GY6 motor was designed by Honda so it is durable and free of design flaws.
I did a ground up rebuild on my 250 Chinese scooter. Because it's a Honda clone motor I can replace any "iffy" components with higher quality stuff. And speaking of maintenance, my mechanic charges reasonable rates (I see him in the bathroom mirror every morning LOL!) So now critical parts such as engine valves, the starter clutch, starter motor etc, are all OEM Honda.
Whats the namebrand of the scooter
Love this guy, I've bought 2 scooters and 1 motorcycle from his dealership. He is a great guy.
I've had my Peace Sports moped for over 2 years now, and this is my first owned moped. I had 2 other ones but different colors (used), but one got stolen, and the other one totaled due to an accident. This particular brand is pretty reliable in my opinion, didn't have too many major problems aside from replacing a few small parts during the first year. I got mines from my local dealer, brand new, for $675 since they are cheaper at the end of the season. Within the 2 years I had mine, it instantly got rusty and some bolts broke off since I live in an apartment and have to keep my moped outside, exposed to all the elements.(really annoying always finding spiders and other creepy crawlies making my moped their home lol.) But as long as it gets me from point A to B I am happy.
I have a cheap baotian classic aka Tao Tao 4 stroke and two things YOU must do is 1 change the oil every 1000 km and 2 check the valve adjustment when they get hard to start, 4 years on mine and not one breakdown!
i just blew up a yamaha Zuna 50 ..sold it and got a kymco bet & win 250 maxi scooter>>>>much better! love scooters!!
How are Kymco scooters?
I own a TaoTao clone, and was fortunate that it had the Japanese carb. I can say it runs great (and for the better part of 3 years of a lot of riding - I daily ride) it's been a great scooter, I've had Wild Hogs in both Lk Mary and Winter Park do my service (and a couple of repairs), they always treat me well, they give me an estimated time to finish, sometimes I just wait around for it and sometimes I come back and get it... they always have done me right. I will buy my next scooter from them, just haven't decided which one I want next.
I had one, don't remember the brand, bought off the 'net; it worked fine for about six months, then suddenly stopped. I never did find the problem (I'm an AMI grad,) and finally sold it. The buyer told me the problem was a "black box." (Sure enough, I don't have an electrical tester.) I'm kickin' myself, but I'm also very leery of any Chinese engineering --scooters, guitars, you name it. How I miss the days when things in stores were mostly marked "Made In USA."
I remember when you could buy a Vespa made scooter at Sears that didn't take all the gold in Fort Knox to pay for.
@@znentitan4032 Yeah, I remember those days well. Guess we're officially geezers.
Just ordered a Tao Tao Powermax 150. All scooters-maxi scooters- bikes- cars- trucks-atvs etc. Are what they are including the name brands. You have to keep up with the wear and tear. A decent mechanic can make one last for years on end while others just use and abuse them and replace them. I researched the Tao Tao Powermax 150 and it will fit my needs until I can afford to go with what I wanted (Honda PCX 150 or Suzuki Burgman 200). Great coverage and thanks.
ive had my taotao 150cc for over 4 years and no problems very reliable, of course i always take care of it with maintenance, i think as long as u stay on top of maintenance they will last
My dad bought a Propel Daytona 150cc scooter 9 years ago and gave it to me almost 4 months ago. I've had to replace the carburetor about a month ago, he's had the brakes overhauled last year at a local shop that actually sells them also. So I kept taking it to the same shop.
The other thing that is a bit confusing is how many of these "brands" seem to roll out of the same assembly lines located in places like Zhejiang province.
I grew up knowing that a Mercury Marquis was just a rebadged Ford Crown Victoria. I can deal with that.
But Chinese branding appears to be much more fluid, and with clones of clones of clones, apparently manufactured with hand-me-down dies and machining, knowing what kind of animal you're buying gets to be a little problematic.
I have a 2011 taotao I bought off Craigslist for $350 in basically new condition with 450km on it and it's been the most reliable one I've owned.. and there have been many over the past 15 years, including a ruckus! The only thing I've replaced was the carb when it wouldn't start after I let it sit for a month or two. It's now up to around 2000km. I ride 20 miles to work and back every day plus local errands and rides for fun. It's surprisingly good. Local shops won't service them but the place down the street carries parts so it's not all bad, I don't mind doing a little work here and there and there are videos for everything on CZcams. There are definitely some lemons out there but if you get a decent and keep your expectations reasonable, they can be a great deal. Insurance is about $100 a year and registration is $6 for three years in Colorado.
i have one powermax 150cc 6 years still runs like new after 25,000 miles i changed the engine oil, still factory transmission gear oil, belt, brakes, bulbs
So what brand/models are best and worst? Like the top 5 each way.
I purchased one from you guys a week ago. Great service and miguel was awesome
I bought a Tao Tao pony 50 I just love it.Plus I bought a ice bear rocket 50 cc which I like as well.They are really excellent scooters.
Wow brother what a great guy you are, I'm from Warwick Rhode Island, and I wish your place was somewhere over here cuz I would definitely do business with you.
Andrew, I will be coming to your store this week to look at a Tao Titan. So nice that we can find a dealer that has several of the scooters that we see online but can actually touch and sit on. look forward to seeing you guys.
Just purchased a used 2005 Honda Reflex, 3,000+ miles, $2,000. They're out there if you're lucky enough to find one.
I have MAYBE $600 in my tao tao. Bought for $350 with less than 1000 miles from the orginal owner. It now has a 23 inch windshield, alarm, remote, windshield, brush guards, tool bag, new batt, new clutch ,new variator, new fluids, spark plug, big bore kit and paint. It went 45-50 mph without the kit.Yes I said 45-50 mph.
Can't wait to ride mine. Still a bit too chilly. Maybe tomorrow or so. Keep that baby maintained, it will be good to you. @@thelagmeister
Same to you. Hondas are some of the best if not the best.
I've been looking for a trike style scooter and issue there is one trike conversion kits are expensive and the only companies that offers trikes are all Chinese, luckily I've found a couple of dealers not far from me that sell them.
I wish you would have told more about which brands were best vs. bad.....
Jim Rees I’ll try to make a video on that thanks!
@@profitmonsters8186 I am interested in Chinese made adult mobility scooters, especially gasoline or propane powered. If possible, please let me know of a responsible US dealer. Thank you in advance. I think that you are serving an important niche market.
love the video my friend but have learned in the last 5 years their is no good brand or bad brand only scooter built for cheap price and built for high price. I say this for the fact 99% of scooters in the us are made in china yes people even you name brand like Honda come from china and most scooters come from the same place factory. I recamend you pay the extra money get better build quality and get a scooter that has as little plastic as possible most companies now days use cheap plastic theat will break over time. the best scooter to buy right now is a vespa mid or upper price or a Honda ruckus. I used to recament genuine scooter companie but now they started using crap plastic. me I work on scooter so I can fix then and no the parts so I buy tao but do not recdamend them.
I will be buying a few scooters from you guys trust me guys they are the best
Thanks for the heads up ! I was going to buy a 150cc chinese scooter with a name i never heard of because it's under $1000 but now i think im going to save more money and just get a good one 👍.
I can indorse my Tao Tao 50 brought it new in So Florida. And the warm climate helps. New Nov 2018 $700 now have 3,449 KM and running strong. You must run your Tao Tao everyday the more you run it the better it will be. The only issue was the bulb, low beam went out. Now, I'm looking to upgrade to a 150. Vespa $4,000+ Visited my Tao dealer they putting together the 2019 150s ? $1.300 out the door. What do you think my choice will be?????
thank you I was a little worried I bought it at a dealer kind of an impulse buy but I am happy with it
Bought a scooter off someone that wrecked it and when they wrecked it they broke the mirror and having issues finding a place that might be able to work on it.. tried using the jb welding stuff but its not helping
Enjoyed your vid, thank you.
Bought a new Genuine Buddy 50 two weeks ago, in Florida, and I'm loving it.
Getting it decked out with strobe lights (and maybe even a fart machine) so that hopefully other motorists will keep their distance and prevent forest fires. Something like that...
Anyway, I'm sure you've gotten over your cold by now, so go ahead and have a Happy Chanukah.
usernamemykel genuine Scooters are one of the best in my opinion!
So how much is your cheapest 50cc scooter? Does it have a gy6 50cc? I'm guessing $1200. Does it have the same engine as the $700 scooter online.Yes. It does. Does it use the same bulbs? Yeah. The only difference is you're gonna talk to me for a little bit and change the bulb that day for an extra $500. I like how you admitted your scooters are just as bad and parts fail. The only differences in the scooters are the body parts and a few stainless pieces, nuts and bolts.
I HDTAO TAO, AND WAS VERY GOOD. I HAVE KIMCO AND IS CRAZY GOOD.
Tall rider here, can use some help. I'm 6'-4", 220lbs. No dealerships in my area so I'm going to buy online. Looking at the TaoTao or BMS brands. Any other Tall riders have any experience with the models of either of these companies. Thanks in advance for the help.
Why premium fuel?
Please buy a scooter from my shop. Don't buy one online. Where did you get the scooters from sir? Well....online.
@@Mybwaincoming from someone that doesn't own a scooter and has never dealt with means a lot . If you have to go to the dealer for little problems...yes you will have a problem with basic maintenance.
@@thelagmeister I've deleted my responses, you are missing my point.
Yes. That's probably for the best. You didn't have a point or any real life experience to back up what you were saying. Talking about going to the dealer when you've never bought from a dealer or even owned a scooter. You are just assuming the dealer going to help you out free of charge. Have a nice day son.
@@thelagmeister I can't believe that you like your own comments, that's so sad
Are you are posting comments and deleting them just to send me messages? You better drop the attitude son, before I take away your internet privileges.
I was given a taizhou chanal 50cc from a friend. Can't find much info about whether it's a good or bad one
Is ice bear good scooter?
You give very solid information which was great to hear, but then I checked your website and you’re expensive! The Jonway Roadmaster 150 you have at $1,499 is $998 in Memphis Tn. for the exact same scooter. Folks shop around...
Thanks for the comment, I actually don’t own that business anymore so they may have increased prices, I was a franchise store, also different locations and supply and demand could be the reason for different prices. I don’t even think jonway makes that bike anymore so the $998 price could be an old model clearance price
So I’m lookin to buy a scooter and I was just wondering if any of y’all think that tao Tao is a good brand, because on a lot of the videos I watched and reviews I read they said that they where good for the price ,but you will need to Change some of the stock parts(tires,belts,tubing,etc) They also said if you know nothing about tools or mechanics to not buy one cause they will need a lil but of work. So really I’m just wondering if it’s a decent scooter for the price
in my country we have the consumers guarantee that the seller has to honour, the three Rs repair, replace, refund, dealers are given the option to repair the scooter within a reasonable time, if they cant then they replace it, if there is not a replacement available they have to refund, as you will make out by this, those brands that broke down were sending the dealers into insolvency so there is only a couple of dealers left selling brands that are specific to them. one is Other and one is Roma they both use the same mechanics, honda clones, just different plastic body panels
I have a question I have a 2015 piaggio 50 cc I want a bigger and better carburetor I know you mentioned Japanese carburetor what can I replace mine with?
I'm looking for a 3 wheel 50cc scooter to ride in the winter which do you recommend?
Hi, i found your video quite informative. Can you help me in letting know some contacts for electric scooter in China.
A dealership will snub u when it come to Chinese scooters. Those Vespa and Buddy 50cc are around the same price as a motorcycle. My 150cc Chinese scooter runs great for $1600
Like most things mechanical in nature, they will work at their best and last longer if the preventative maintenance is done as required. You covered a lot of important point in your video...run synthetic motor oil...and change it frequently. These small GY6 motors do not have screw on oil filters like a larger traditional motorcycle does. It's just a small mesh screen that is cleaned and reused with every oil change. All the more reason to be changing your motor oil regularly. Also, upgrading things like the battery, air filter, spark plug are all inexpensive and easy to perform.
I especially agree with your comment about avoiding internet only dealer. That's definitely asking for trouble if you ask me. There's a guy who posted a video of his Roketa 150 that he put 26,000 miles on within 2 years of owning it. czcams.com/video/26R9wzXqME4/video.html . With that kind of mileage, you can't possibly find cheaper transportation, short of taking the bus.
Thomas Austin, thanks for the great comment! I totally agree, take care of your scooter and it will take care of you!
Actually, I think taking the bus would cost you more.
I need some help. I’m here in the Dominican Republic and looking to buy a scooter to get around in the city. This small store is selling a Tauro BZ 150 Plus scooter. I’ve looked all over and can’t find any specifications on this make and model. I know it’s a Chinese made scooter and that somewhat makes me hesitant because I can’t find any specs. And after watching your video, I’m concerned about quality and reliability. Any info you have on this make and model would be helpful. Or if you can point me to a website that I can get all of the details that would much appreciated.
How is Znen scooters buddy? Especially how is Znen T9 ? I am having the mahindra gusto 110 cc which i bought by 8 months ago. And its a very good bike indeed. But suddenly i got interest to buy the Znen T9 and i am confused little bit
Murad Haque
Try SYM, Kymco from Taiwan and you'll be happy. Don't bet your luck on scooters from Communist China.
@@darcychu9652 So says the greedy dealer.
I have had several, one thing for sure Kymko is a nightmare, Ben to 3 dealers, no spark, no Chinese parts fit,+ dealers know that.
No real prob to pop open a 'sealed' carb.
Oil they come with, is NOT for running, shipping only.
Synth oil is NOT recommended for break in.
Do you stock Lifan scooters?
You don't need 93 octane in gy6 stock
Damn wish you were in Virginia.. you seem like a good dealer and I'm having a tough time finding my first scooter....
リックフル thanks a lot! If there is anything I can do to help you ok your hunt let me know!
Mine is a Longjia
Thank you for the info.
if you ever have contact with johnway scooters produted in china dont do it. ater one year only lights that still worked was high light not the normal light and the break lights. turn lights have worked for two days and that was it. i have drive the scooter for one year random just drive a bit for the fun 1500km after a year is not drive a lot. starting with starter you can forget it. kickstarter one kick and he runs. good i have that kickstarter. but when it is a bit evening i cant because the lights not working.
Do you think you can do a cheap scooter giveaway
Have you ever heard of Chongqing brand? Bought one used and want to know how to do maintenance on it plus any upgrades I can do such as power it up on the motor side over the 50cc (I'm a bigger guy compared to alot of guys, 6' 3" 310lbs.) I do all of my own automotive repair, etc, etc.
I would like to find some websites that are legit to where to find parts, etc. I am open to Modding some stuff. I think I have the Gy6 motor.
The "Rup upgrade" you guys do sounds good and would be a good investment it sounds for my scooter.
IF you reply back with contact information I can contact you and see what we need to get this work going on mine. I have two little round headlight bulbs on mine and would like to upgrade to LED bulbs if possible for two reasons. Better vision at night and when idling vs driving the headlights are dim then brighten up.
This isn't generally the case with LED lights I've found on regular Automotive vehicles such as my Chevy Tahoe (05) and Chevy Impala (06). The Tahoe I am original owner on and the impala was a fleet vehicle before I bought it a year old with 40k miles and enough warranty left to get about 3k of stuff replaced the first week after I bought it as some stuff came up and the dealer was able to squeeze them thru as warranty.
Let the replies roll in please. OH the model number on my scooter is MP-050C-JCL which is the stickers on the side.
Also I noticed it listed the oil types to use but in the video you confirmed what I wondered about which was that they could use Synthetic Oil.
The engine oil on the moped is listed as 15W-40 which was what we'd use in semi trucks when I drove for 13 1/2 yrs up until 10yrs ago before going on disability due to back issues. I'd worked on class 8 semi trucks, trailers, welded trailers, trucks, gas tankers prior to that after coming out of the Army in late 1993.
I'd also like to find a heavy duty shock as I see my shock is leaking oil which had I seen before that I would've bargained more. I feel kind of robbed at paying $480 and then 3 days later buying a battery. I won't have to get it licensed but will just have to transfer the title.
Opinion on ZNEN A9 50cc Scooter ???
How do you feel ability Taiwan made engines? I hear that the quality is much better than their Chinese counterparts, any thoughts? Thanks for the advice.
Any opinion on Solana scooters?
Have you heard of Meylun Scooter from China? Any good?
What do you recommend for under $1000?
Anand Patel
SYM, Kymco from Taiwan are as reliable as Japanese scooters at better price, much much better than those from Communist China.
Anand Patel peace sports, is probably the best price under $1000, we sell them for $899
I got my 2006 Honda Metropolitan for $700 on craigslist. It was sold to me with 10,000+ miles, running slow, and was backfiring, but all it really needed was an imitation honda fuel pump and fuel filter ($20), a Briggs and Stratton Air Filter ($8 at Lowes), an NGK iridium spark plug ($8 at Amazon), and I went ahead and oil changed the engine to Royal Purple 10W-40 synthetic oil (+-$10), and the Gear Oil to Mobil 1 ($20). Registration in New York costs $6.50 per year, and progressive scooter insurance +-$100 a year. I'm now at 11,000 miles running strong, always pumping 93 octane fuel. And everything totalled to less than $1000, and gets me about +-90 MPG. In my opinion, get a Honda Metropolitan. My TaoTao is VERY problematic with starting, Carb cleaning, and all the other cheap sh*t and complications going on. Mind you, I'm not really mechanically inclined. The TaoTao was a headache, and failed me more than a handful of times, and Honda is real pleasure to own.
Don't listen to everyone who insists Honda or Yamaha only. Genuine makes great scooter, as do SYM and Kymco and much cheaper than the Japanese brands, they are just as nice possibly nicer. My SYM was much quicker than my friends Honda having the same cc's
Depends on if you can service it or not.
I have no problems servicing my own vehicle's and bought a cheap used Roketa and have had no problems with it
I just bought a 2008 Xingyue 260cc with 3500.. How reliable is this brand? And what causes a scooter to over heat quickly? I bought it for $400, knowing I was need to put some money into it. Thanks!
Branzilla 17 You may have a little trouble finding parts for it just because it’s an older model, I would definitely make sure that there’s a dealer or a scooter shop in your area and I can fix it if you have any issues. As far as overheating it’s most likely either a radiator issue a temperature sensor or the thermostat that’s bad and it probably needs to be replaced
What about ethanol n fuel?
You do not sale PST50-19N trike i want!
Best to buy any scooter from a dealer. A lot of the mail order in the crate "put it together yourself" deals from China end up having problems with fraudulent factory titles, and you have a heck of a time putting it on the road with your state DMV.
Wild Hog Scooters, ha I love it. Check out my Wild Hog Scooter it looks like a little Harley! 150cc California Scooter Company made these to copy the old Mustang. With the Running Lights and Windshield they look just like a mini Harley. But I've got about 5 grand in it.
My scooter got 5 stars on it dongfang rtx 50cc with upgrade engine chain drive!
All the brands this guy mentioned at the beginning are very low quality. If you want a better quality Chinese scooter buy a GMW or Wolf brand scooter.
Is lifan ok?
ZNEN makes Wolf scooters.
is adly gta 50 good or bad?
High octane fuel is for high compression engines only. It does not improve power. If you have a low compression engine and you run high octane, it is a waste and over time will ruin your engine.
If you’re spark plug runs hot, then higher octane might be needed as you want to prevent engine knocking. These 50cc scooters run fine with 85 octane. High octane does not mean more power!!
It's the ethanol in the lower octane gas...premium octane has ZERO ETHANOL....which eats up your gaskets hoses vacuum and fuel lines etc....pay attention dude!!!!
Good scooter
part 2, i decide to fix the lights at myself because the service in our country says i have waranty on the parts not the working hours. and if you know they asking 55 euro per hour wath means to expensive if i let do it to them. so i grab me a Screwdriver and started to find how it goes. after almost a half scooter dessembled to get on the lights and breaking some paper plastic the lights are ok. it seams relay etc.....
Whats you view on the Aprilia SR 50 ? it's a little pricey but it's italian.
HitchHikersBlues Aprilia is a great scooter, not many dealers in Florida sell them, it depends on where you live but quality is great!
Hard to tell? someone want the mother other the daughter?? I have had a Kymco Agility 50ccm it is made in Taiwan with a Gy6 engine on, goes wery good, the engine is a Honda engine, made on licens in Taiwan, and it is a very used engine today on most scooters,even them from China. Kymco
maded the engines for Honda too. Today i have a used Chineese scooter, VGA called here in Denmark, it is a 2 stroke, goes tarrific, it is a Longjia built, but a big dealer here sold them as his own brand VGA....The world has chanced-when i was young we had several Moped factory´s here in Denmark......but it`s over....
If you have to change the carburetor on a Chinese scooter with a Japanese made one, you're better off just buying a Japanese scooter. Seriously, avoid Chinese made scooters as they are crap, will cost you more money over time, and are made out of low quality parts that will put your safety at risk.
Are you still in business? I don't understand why anyone looking for a Chinese scooter would go anywhere other than a reputable place like yours with excellent after service!!
Do you ship to Puerto Rico?
most name brands roll off the same assembly floor
what is your opinion on the wolf rugby 50cc or 150 ?
Ricardo De La Rosa wolf has come a long way and their product is much better than when I first made this video. Their quality is very high
@@profitmonsters8186 thank you brother
Yamaha or Honda all the way.
Taiwan or Japanese scooter will last forever with proper maintenance. No warranty needed
and Sinnis
SYM and Kymco Taiwan made scooters are as good and cheaper than the Japanese
your got that right that all i buy
Taiwan for years, manufactured Honda’s parts. FYI
Geely scooter is ok ?
I am wondering the same thing - I really like the Geely St Marlo 150 cc but I don't see very many American dealerships who sell this type of product. Is anyone in this forum familiar with this brand?
90 percent of china carbs work fine, if 1 arrives with a plugged fuel air hole, simple use sheet metal screw and remove.
sunny = dong fang ?
part 3: i can go on but i'm warning dont sell them to customers if they ever contact you. they gonna give you a lot problems and they dont have any solutions for it. be warned. dont forget johnway scooters is the name. bad bad bad bads. back to german scooter 12 years whitout any problem.
don't buy from wholesaleATV or mopedmotorsports, which is the same company. I paid in full and waited 5 months, then they called me and admitted they didn't know when I would get my scooter and the news was not good. then they charged me almost $100.00 for restocking fee. THIEVES.
THEY DON'T DARE CHALLENGE ME, BECAUSE I STILL HAVE ALL OF THE SCREENSHOTS AND PHONE CALLS SAVED. I WOULD LOVE THEM TO TAKE ME TO COURT. EVERYTHING I AM SAYING IS TRUE.
Who makes this: 2017 Bintelli scorch scooter?
Chris Samurai bintelli is the manufacturer. The scorch is the model. It's Chinese but good brand :)
Thanks Andrew. What about American scooters? Why there isn't any out there? Why these sharks don't make one?
Not very technical, a bit of a long winde let down.
Wolf scooters any good?
yes they are a great brand now very good quality for the price and customer service in the USA
@@profitmonsters8186 ...thanks for the response and help.
have you heard of gator 150 limited edition
Wayne Hall yes I've heard of them! They're pretty good and most parts are universal and easy to get online or at any local shop. Just take care of it and do all the services that are recommended
Wayne Hall yes I've heard of them! They're pretty good and most parts are universal and easy to get online or at any local shop. Just take care of it and do all the services that are recommended
Wayne Hall yes I've heard of them! They're pretty good and most parts are universal and easy to get online or at any local shop. Just take care of it and do all the services that are recommended
Simply! Get baotian! Just get a new battery for 30 bucks. And cheap solder iron and electrick tape to secura all wires... dont fall at that carburator shit, just fucking drill it so you have full access...(pro tip if thia is legal in ur area: drill these litle valve thinks to larger=more power) and a simply remove that big bulgy ground stand! You will safe shitton of cleaning if you do so.
Bintelli scorch pretty good
If it is not a Yamaha or Honda do not buy it you're just throwing your money away spend a little bit more money and get a better scooter
Lol no thanks. I'll spend a fraction of the money to buy a cheap bike and ride it around.
Only issue I've ever seen is people who don't know how to turn a wrench never servicing them before
I don't buy any scooter that dosen't have at least a 63mm piston with some 32mm oko flatside!!!!
1. Foreign motorcycle companies are banned by the Goverment, so companies like Yamaha has to produce their motorcycles through a joint-venture company in China. Models that these company produce could be better than those that the local Chinese company do.
2. There are a few models with electricity-spraying fuel system.
3. Super cheap, cool and useful accessories could be found on Taobao.
4. Don’t buy any motorcycle on Taobao, you never know if it was built in someone’s garage with a fake certificate of compliance.
5. Chose models from the portfolio of a well-known company (do the research), then find a local dealer with contact to that company.
We take it you're not from the US
Peace sports are crap, I have one, I work on them, I worked on a scooter shop. They break, they leak. The shocks, bushings, are bad. Basicly very poor quality.
mandapalque “break” is the proper spelling, and i have to disagree because I sell them everyday. I also have s great relationship with the company and any issues we have are always taken care of my peace sports. I’ve never in 5 years had a shock leak. Most issues people have with any Chinese scooter is lack of service, negligence and riding the crap out of the scooter.
Wild Hogs Scooters you sell them, you are going to defend them. They are crap compared to Yamaha, honda, kymco etc. I have worked on 2 shops and I own a peace sports. They are crap. The plastics brake so easily. The engines leak, period. You have to replace the oil retainers. Lucky for us there good like retainers out there. Leave a peace sports out side with the sun every day for a hole year and compare it with a yahama Zuma 125. Wolf brand scooters are better. But all the names you mentioned are very bad quality.
Warranty??? If customers don't do the oil changes with the dealers they loose the warranty if there is any. Oil changes: 50 dollars. I can change my oil my self for 5 dollar with synthetic oil. 50 dollars x 12 months is 600 dollars. That warranty is BS. If someone wants a really good scooter go with big names. If you want to have a lot of problems buy a chinese.
mandapalque you are entitled to your opinion, a $799 Peace sports scooter you can not compare to a $2500 Honda or Yamaha, I agree that that are not too quality by any means, but we would be out of business if they were that bad as you describe.
Wild Hogs Scooters it is not my opinion: it is my reality supported by experience owning 2 150cc's. And by working on 2 shops. The only good ones are wolf brand scooters if you want to stay with GY6 engines.
Wild Hogs Scooters they are super friendly price wise and parts price wise. I love my GY6 engines. I can show to you a complete dozen of scooters from my friends with plastics broken. Engine s don't leak anymore cz we fix them. I do tell people they can buy Chinese scooters, but if they do not know or want to work on them I tell them go with great names.
Use ethanol free gas
Why oh Why would you chose to sell chinese scooters?? LOL
sam3d because the ones I sell, I have a good relationship with the distributors and can get all parts to fix them and they really don’t have that many issues at all. We sell tons of scooters and not everyone can afford a $3000 Honda or Yamaha 50cc
Is tao tao a good moped to purchase
maybe...I've owned a Lancer for about a year. If you maintain it and replace the parts as needed it could last you a good while. Key word there is "could".
@@coppersky I just ordered two TaoTao Lancers for my husband and me to ride the backroads. I love the way they look. Hope we don't get lemons 8/