How to Adjust the Tilt and Tension of Your Monitor Mounts
Vložit
- čas přidán 27. 08. 2024
- 0:04 - Arm rises up (decrease tension)
0:15 - Arm falls down (increase tension)
0:15 - Monitor faces down (adjust tilting)
In this video, we demonstrate how to adjust the tilt and tension of your monitor arm for optimal comfort and viewing experience. Whether you're using a MOUNTUP monitor arm or any other similar product, we've got you covered!
----------------------------------------------------------------------------------------------------------------------------------------------------------
Website: mountup.com/pr...
Amazon US: www.amazon.com...
Learn more - mountup.com/
----------------------------------------------------------------------------------------------------------------------------------------------------------
Connect with us:
Instagram - / mountupofficial
Facebook - / mountupofficial
Twitter - / mountup_us
Email: business@mountup.com
#mountup #monitorarm #ergonomics #workspaceinspiration
My issue is the part that you can’t tighten at the part that you can tilt your screen as mine is on an angled wall
Hi there, please follow these steps to adjust the tilt of your monitor arm:
Step 1: Loosen the tilting bolt by turning it counterclockwise
(-） with the Allen key.
Step 2: Hold the bottom of the monitor with one hand and
adjust to determine the desired tilt angle.
Step 3: Retighten the tilt bolts by turning clockwise (+) with
the Allen key to secure the intended angle firmly.
If it still doesn't help, please feel free to send your monitor parameters to cs@mountup.com and a video showing the problem is highly recommended.
you just saved my life omg thank you soooooooooooooooooooo much
Glad this helps!😀
you just saved me
Thank you very much 😊
You save me also
My arm it’s locked in the high position and it’s don’t move up and down how can I fix this ?
U did?
Hi there, you can follow these steps:
Step 1: Check and make sure the weight of your monitor
meet the minimum weight that the mount can support.
Step 2: Please hold the upper arm and press it down to
maintain a horizontal position, and then you can see the
adjustment screw at the joint.
Step 3: Be sure to keep the arm in a horizontal position
during adjustment. Use the Allen key to adjust the tension of the Upper Arm. Turn the inside screw clockwise (“-”direction) to decrease gas spring tension until the arm can stay as intended. Sometimes you will need to turn by many circles which may be 15 circles or more.
If it still doesn't help, please feel free to send your monitor parameters to cs@mountup.com and a video showing the problem is highly recommended.
my arm does not move up or down automatically and i don't know how to fix it, i have gone both ways with the tension, i have tried with the monitor on and off and i cant figure out how to do it.
Hi there, it's good when your arm does not move up or down automatically. When the tension is appropriate, the gas spring arm should stay still at whatever height you set the monitor. Hope my answer helps. Or if you have any other questions, please feel free to send your order number, and a video clip showing the status of the monitor arm to cs@mountup.com. Our customer service team will be happy to help you out😊
Mine has the same problem. It's faulty.
Thank you so much
My stand arms keep moving inward towards each other how do I fix it
Is your arm a dual monitor arm? There's a bolt at each joint of the arm. Find out the loose joint and you can use the Allen key to tighten the bolt to see if it improves. If it doesn't help, please feel free to send your monitor parameters to cs@mountup.com. Videos are highly recommended.
Hey
My joints are too hard they don’t move at all, I have the Humanscale 8.1, it won’t move at all to adjust the tension
Have you installed the monitor on the Humanscale arm first to add some weight on it?
Besides, its tension adjustment screw seems not to be the same place as ours. It's not necessary to pressure the arm horizontally first if the adjustment screw is not hidden.
My upper arm "A" is locked in the highest position and will not adjust, I sent a message online but never heard back, can you help?
Did you figure it out?
@@Boziji did you?
Ts just happened Amazon support is actually the slowest humans ever I hate to say it cause their so nice but they legit don’t know wtf their doing
@@NoviPlayz did u
@@URFATH3R yeah man out the monitor on first and it’ll be super easy
I was just overthinking it
Monitor on then just tighten it loosen it a couple times, enjoy!
Hey there i love the mount so far but my monitor is 15.5 pounds and ive tightened the screw extremly tight but it still leans forward a bit so do you have any solution
Hi, thank you for enjoying the product! Could you please send pictures or a video of how you adjusted the tilting, and the model of your monitor to cs@mountup.com? We'd love to help you out!
You need to turn it counter clockwise, not "tighten". Try that and see what happens.
@@MsWhatdoyaknowur the fucking goat 🐐
the tightening bolt only rotates depending on the position of the monitor.. tightening it just makes my monitor lie on it back, as soon as i get it to the position i want it, it falls down
Hi there, we are sorry to hear that you have problems using the product. Please feel free to send your order number, and a video clip of showing how you adjust the monitor arm to cs@mountup.com. Our customer service team will be happy to help you out😊
You need to turn it counter clockwise...not "tighten" it. Try that and see what happens
Does the arm hide the cables through it and will this work with a tv instead of a monitor
Yes, this model offers cable management functionality, allowing you to neatly conceal the cables.
It's important to consider the VESA hole pattern and weight of your TV. This mount is compatible with VESA hole patterns of 75x75mm and 100x100mm, with a weight capacity of up to 17.6 lbs. Please note that many TVs exceed this weight limit.
Thank you
What if you cant move it at all
Hi there, you can follow these steps to see if they help:
Step 1: Check and make sure the weight of your monitor
meet the minimum weight that the mount supports.
Step 2: Please hold the upper arm and press it down to
maintain a horizontal position, and then you can see the
adjustment screw at the joint.
Step 3: Be sure to keep the arm in a horizontal position
during adjustment. Use the Allen key to adjust the tension of the Upper Arm. Turn the inside screw clockwise (“-”direction) to decrease gas spring tension until the arm can stay as intended. Sometimes you will need to turn by many circles which may be 15 circles or more.
If the problem is still unresolved, please get in touch with cs@mountup.com with a photo/video of the problem and your monitor and monitor arm model.
For me this doesnt work 😢
Don't worry dear, please feel free to reach out to our customer service team via email cs@mountup.com with a video showing the problems you encountered. Our professional and helpful customer service team will be happy to help you out! :D
I lost the tool needed to tighten then arm 😅
😊Please feel free to contact cs@mountup.com with your order number, address to get replacements.
This mount is sooooo low and the height adjustment is a joke
Hi there, I'm sorry to hear that you are not happy with our product. Please feel free to email us via cs@mountup.com with your order number, a video of the problem and our customer support team will be happy to help!