Efficient TIG Welding for Thin Profile Pipes / Feat. Thermal deformation
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
Vložit
- čas přidán 12. 12. 2020
- Hello everyone.
Today, we welded a square pipe.
And I added a little bit about heat deformation by welding.
There are several ways to weld this.
Among them, I introduced one of the simpler ways to weld thin profile pipes.
Please try various welding methods.
In the future, we will also introduce information on thermal deformation by welding.
Thanks for watching.
Have a nice week.
#profile
#Angle
#square
#pipe
#TIG
#welding
#Hagojibi
Thank you so much for taking the time to show us your welding knowledge and ideas on how to deal with various jobs. I have learned so much from you. Very much appreciated. I enjoy the humourous parts too!
Ty so much for these videos. I've almost cut out all mig and stick welding at work. For a few reasons. My teacher at school told me next semester I should be testing on small dimension pipe after I showed him my last weld and was very pleased. I gave you credit for my progress hope you don't mind I've also told my class about you.
Thank you teacher. I am a beginner but I am learning fast and your videos are very helpful.
I used to to this on 10, to 15/10 mm stainless steel square pipes, but with no filler metal, or at least with 1 mm filler rod, nice explanation👍🏻
Love a good sunday morn video from your self . Love the reversed weld clamp idea , brilliant.
Thank you! You are a good teacher! I like your channel and your lessons! I learned how to tune the device to an impulse, thanks to your videos!
늘 재미나게 잘보고있습니다..^^
안녕하세요 가설TV입니다~^^ ㅋㅋㅋㅋㅋㅋㅋ깨끗하게 맑게 자신있게ㅋㅋㅋㅋ 너무 웃기네요 ㅋㅋㅋㅋㅋㅋㅋㅋ영상 잘 봤습니다 좋아요 꾸욱 누르고 갈게요^^!!!
Very good video.
Filler insertion will make for a stronger joint !
After watching your videos I’ve swapped from 2.4mm tungsten to 3.2mm and the difference in my welds is crazy. Massive improvement even at low anperages
why is it helping to switch to a bigger tungsten diameter ? pls explain
@@RebornDuckling it seems to blunten allot less after re striking etc, Might just be me but I defiantly spend allot less time re sharpening my tungsten 👍
반갑습니다 잘 배우고있습니다
your guide is very good on how to solder cane
뜬금없이 깨끗하게 맑게 자신있겤ㅋㅋㅋㅋ
Ah! This is the part I wish I knew about earlier in the year!
Thank you! Very informative video!
잘 보았습니다. 👍
Thank you for your very helpful videos
Excelente. Gracias desde colombia.
Congratulations great video and thanks for the valuable advice 👏😊👍🔝
감사합니다
Thank video welding
Очередное отличное видео!👍👍👍
감사합니다 😊
Круто, мужик, продолжай!
최고에오 !!!
Good
ㅋㅋㅋㅋㅋ깨끗하게 맑게 자신있게~~
몇번을 봐도 재미있고 유익한 정보 넘 감사합니다
사각파이프로 2단 프레임을 만들때도 용접순서를 안쪽 부터 하면 변형이 덜갈까요?
재질은 스텐레스 50×50, 입니다!
감사합니다~~
Thank you seipai
Top
Спасибо!
Sawasdee.MASTER.
magnificent
💯👌.đẹp quá
Muy bien 👍
Soldar de manera extraordinaria lo felicito hago
👍
사장님 너무 잘봤습니다
그동안 궁금 했던게 사각 프레임 2단으로 짤때 용접순서 궁금 했는데 누구는 바깥쪽부터 하면된다.
또누구는 안쪽부터 해라 말들이 달라서 헷갈렸거든요 ^^
스텐레스 사각파이프를 45도.90도 어느것을 해도 같은가요?
스텐 종류는 용접 하고 산처리만 한답니다
그라인더는 못하니 보강대는 힘이드네요^^
gracias por el video, me ayudo bastante ya que soy principiante :D saludos desde Peru
Your the best tig teacher!
SUPERRRRRRRRRRRRRR
구독~~조아효~~ 갑니다~ 어쩌다가 영상처음 보네요 친절한 설명 ^^ 궁금 한게 있습니다! 텅스텐 3.2 보다 얇은거쓰는데 용접을 하다보면 자주녹아버리는..? 현상이생깁니다 중국산은아니구요
그리고 영상에 보이는 소켓은 어뜬건지 궁금ㄴ하네요^^ 주로 박판용접이라고 하나요 그걸주로하는데..아직 티그 초짜입니다..^^
👍👍👍👍👍👍
용접이나 취부를 할때 순서때문에 변형이 많이 옵니다
근본적인 원리좀 부탁드려도 되겠습니까..
부탁만 드려서 죄송합니다
Buenas noches desde la c.d. de México este procedimiento lo puedo seguir también con perfíl en ángulo de 1 1/4 en acero inoxidable calibre .20
Bonjour,
Encore bien merci pour toute vos vidéos c'est un vrai plaisir de les regardés, jusque combien de mm max vous conseillé de soudé par impulsion (alu, acier, inox), merci.
Didier.
Le soudage par impulsions est principalement utilisé lors du soudage de métaux minces. Cependant, il peut également être appliqué lors du soudage de matériaux épais. Il n'y a pas de limite à l'épaisseur.
@@weldHAGOJIBI Bonjour, vous parlez français ou vous avez traduit.
Didier.
😎😎😎😎
저도 티그용접일을 하는게 목표지만 인맥도없고해서 지금은 조선업 취부를 하고있네요ㅜ 너무 힘듬ㅜㅋㅋ그래도 용접사가 목표라 많이 부럽습니다.. 용접자격증은 3개 가지고있죠ㅋ 티그용접일 하시면서 도면을본다던지 취부를 해야되는 상황도 오나요?
네 그런것도 배워두시면 좋아요. 나중에 쓸모가 있을거에요
Aquí estoy usando el proceso mig con aporte en .45
Kamhsamnida Sonsenim
Te mando vídeo dela pieza en cuestión para una consultoria
Really nice 👌 😍💋 💝💖❤️
What kind of filler rod you are using?
1:40 I need a toggle switch. Where can I find one?
Good. I wait for love from you 💝💖
So 30% of the time it 150A and 70% at 10A or the other way around?
the first option
Anyha seyo
Ya subí los vídeos espero los veas y me des tu opinión gracias y buenas noches
Слишком дорогая сварка аргоном
Dude murdered someone with his bare hands right before recording a square tubing Tig video
Бля, а переводить кто будет)