Mistral PaddleBoard LIDL SUP Unboxing

Sdílet
Vložit
  • čas přidán 27. 06. 2021
  • #Lild #PaddleBoard #Mistral SUP
    Description
    Two-chamber inflatable SUP (stand up) paddleboard
    Wide tread with anti-slip surface for high stability and safe standing
    3-fin system for optimal gliding
    "Drop Stitch" technology - connecting the top and bottom layers with thousands of polyester fibers, which will significantly increase the strength of the float
    The length of the paddle is adjustable from about 167 to 229 cm
    The backpack allows easy carrying and storage
    Two high pressure valves for easy inflation and deflation
    Flexible cords for fastening light loads
    Advanced two-chamber construction for higher stability and durability - unlike older or basic paddleboards, it has 2 separate chambers and 2 valves. The whole float is significantly stronger and from the point of view of quality it approaches it with a solid polycarbonate float. Thanks to the combination of the inner and outer chamber, bending is also significantly reduced and they increase the load-bearing capacity and safety of the paddleboard. If a critical situation arises and air escapes from one chamber, you can reach the shore safely thanks to the other
    Thanks to the seat with backrest, you can also paddle in a sitting position
    Wide all-round design with high load capacity is suitable for beginners and advanced
    Center handle for easy carrying
    Package Contents
    SUP Board
    Paddle - optionally single-leaf (standing ride) or double-leaf (kayak seating)
    High pressure pump
    Seat
    Backpack for carrying and storage
    Waterproof bag approx. 10 l
    Foot safety cable
    Repair accessories
    Fin
    Material
    Board: PVC, EVA
    Paddle: aluminum, nylon
    Pump: PVC
    Cover: polyester
    Fin: nylon, PVC
    Technical specifications
    Volume: approx. 300 l
    Load capacity: approx. 150 kg
    Two-chamber technology with 2 high-pressure valves
    "Drop Stitch" technology
    Dimensions
    Board: approx. 84 x 15 x 320 cm / 10.5 'x 33 "x 6"
    Paddle: approx. Ø 3 x 167-229 cm
    Pump: approx. 24 x 64 x Ø 7.4 cm
    ˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜˜
    Many thanks to everyone who will pass by visiting my channel. Likes and comments are highly appreciated.
    ✅Subscribe: czcams.com/users/smileyvi...
    ✅ Facebook: / photography.videograph...
    ✅ Instagram: / smiley.photography2
    #Paddleboard

Komentáře • 28

  • @tomi12619
    @tomi12619 Před 2 lety +2

    Very good video dude, thanks a lot!

  • @marioride2447
    @marioride2447 Před 10 měsíci +1

    Muito obrigado

  • @Juwux_a330Fan
    @Juwux_a330Fan Před 2 měsíci +1

    THANKS MAN IT HELPED ME DISEDE TO BUY IT I AM GONNA BUY IT
    '

  • @ZOISANIS
    @ZOISANIS Před 3 lety +1

    Excellent!
    Beautiful is the lake.
    In which country this is?

    • @SmileyVideography
      @SmileyVideography  Před 3 lety +2

      Thx!! There were 2 lakes, i believe you speak about the second one is in Slovenia i dedicated 1 full video for this beautiful country posted in my channel under the following link czcams.com/video/Szl6rnbkP0Q/video.html

  • @majklcz1
    @majklcz1 Před 2 lety +2

    Thanks for the video. How long it takes to inflate it? (and deflate). I am asking as I don't have enough places to store it, I would need to deflate it every time... :)

    • @SmileyVideography
      @SmileyVideography  Před 2 lety +3

      It take me around 10-15m to inflate it and i usually start to deflate it 30m before i know im leaving then i suck the rest of the air with the pump so it take me again 10-15m to completely deflate and pack it in its bag.

    • @user-do4qz5lm3i
      @user-do4qz5lm3i Před rokem

      Перевод

  • @jvogelsanger9522
    @jvogelsanger9522 Před rokem +1

    Why did you inflate the middle chamber first? Instructions say the 1st chamber should be inflated first. Thanks!

    • @SmileyVideography
      @SmileyVideography  Před rokem

      Because its more convenient for me, when i inflate the 1st chambre the middle chambre the PVC will not have enough room to stretch to accommodate. While when i inflate the middle chambre the outside chambre can accommodate to the change and PVC will get stretched easily.

  • @74Walle
    @74Walle Před 3 lety +2

    Did you like the board? Any complaints or is it a good sup?

    • @SmileyVideography
      @SmileyVideography  Před 3 lety +4

      Combining Price, Quality and Accessories that comes with its perfect, Mistral Lidl SUP is 2 air chambers and an anti-slip surface for secure footing. I have been traveling with it almost everywhere. Also when you see the brand Mistral u know what quality your are buying Mistral is leading in the SUP world i bough 2 and most our friends bough it as well. This board is especially suitable for starters not professionals.

  • @martinemp6269
    @martinemp6269 Před rokem +1

    Great video! Question about inflating: so the pump really has to go between 13 and 15 psi? My meter didn’t seem to go up more than 5, but I’m scared the board will pop haha 😂

    • @SmileyVideography
      @SmileyVideography  Před rokem

      Hhhh No worries it will not burst. Just keep pumping until your meter needle reaches the green zone 👊🏽

  • @dodgeysolenoid5567
    @dodgeysolenoid5567 Před rokem +1

    So what's your conclusion/verdict on the paddle board. You get to the end of the video and don't sum anything up????

    • @SmileyVideography
      @SmileyVideography  Před rokem

      The paddle is very stable on water thanks to the 80cm wide and 2 chambers. I definitely recommend having one also the newer versions are great. Im still using the paddle board until today. I traveled with it multiple times. Just be aware this is for normal use not for any sort if sport racing.

  • @niklas1914
    @niklas1914 Před 3 lety +1

    There is also a "race" version from Mistral sold by Lidl. Have you tried that one?

    • @SmileyVideography
      @SmileyVideography  Před 3 lety

      Not really. I bough 2 SUP from this type for normal summer use in lakes or sea.

  • @KristinaKljueva
    @KristinaKljueva Před 2 lety +2

    Nice. You keep wrong your paddle, with letters in front

    • @SmileyVideography
      @SmileyVideography  Před 2 lety

      Thx!! Yes you are right 🤭 but you know sometimes i dont really pay attention!! 🥴 Most important we enjoy paddling 😄

  • @juanflys
    @juanflys Před 2 lety +2

    Funny how the valves are numbered 1 and 2 so you follow that inflation order....you inflated it in the wrong order, which makes this video dangerous, someone might break their board after watching this. For some reason you also said 0.8 0.9 PSI which is also wrong, you were talking about BAR, not PSI. The ideal is 15 PSI, which is 1BAR (so even the 0.8-0.9 was wrong)

    • @SmileyVideography
      @SmileyVideography  Před 2 lety +1

      The number 1 and 2 are just referring to double chambers there is no order or whatsoever to
      Inflate and i find it way better to start from middle! However you are right the 0.9 is Bar not PSI. Thank you for watching any way.

    • @juanflys
      @juanflys Před 2 lety +1

      @@SmileyVideography the manual says to inflate them in that order, I know because I have that board :)

    • @katerinapap5190
      @katerinapap5190 Před 2 lety

      Thank you for the video! So which is the right way to starting inflation ?
      I am a beginner on sup and i am considering to buy this one by lidl . Thank you!

    • @juanflys
      @juanflys Před 2 lety +2

      @@katerinapap5190 first 1, then 2, 15PSI

    • @moonshine3333
      @moonshine3333 Před rokem +1

      Absolutely 1 then 2. 1 controls how far 2 can expand!