Numark NS6II fader repair
Vložit
- čas přidán 29. 08. 2024
- Before i start: If you liked this video please click like, it helps a lot.
So, this one IS A HASSLE! Watch the entire video before attempting this... that's all i can say! :D
To repair crossfader just unscrew it (2 screws) and watch how to repair fader (8:05)
As per usual: If you have any questions ask the down below :D
If you find this useful, you are rich as F**K and want to buy me a beer:
paypal.me/mtstech
BTC-ME:
1P7drxDQALyJDm8rCVSuhEXkiS5LnYFpRr
ETH-ME
0x21E4cC6BEf890000B1cD52e23F426382d5651B92
Subscribe to my other channel:
/ @mtsreviews8629
#repair #numark #replacement #tutorial #soldering #dj #controller #disassembly #stepbystep #crossfader
I have nvii and i have the same problem with all the faders. I will try to do the same hopefully it will work. Great video btw.
Thank you very much for taking the time to make this video brutha! I've been needing to replace the channel 1 fader for years (I bought my NS6ii used) and now at least I have clear instructions on how to get to the channel fader section. My crossfader is also starting to bleed on the left side so may as well swap that out too. Any idea where to get replacement parts for the channel fader section? I'm assuming a mini Innofader works correct? Thank you again!
ebay, replacements are cheap and work as fine as the original one + they last the same
I have a problem with my pads
Yeah, they tend to fail. However buttons are inexpensive…
@@MTS_IT have you ever changed yours I can't find a picture or service manual for the NS6 2. I find it strange that all eight pads have the same problem. Press the pad once you can't press it again unless you restart the machine and it's not a software problem it does it with both serato and virtual dj.
@@MADSELECTOR to me that seems like you have either dirty pad (clean it with isopropyl alcohol) or a stuck button