I have a 2013 Volkswagen Passat in the US but the headlight unit on this Sharan MK2 appears to be nearly identical , this is the best youtube video I have found showing and explaining how to replace the entire headlight unit , not just bulbs ... this was easy except for the grill removal ... it took almost as much time to remove the grill as to remove and replace the headlight unit .. my fingers are rather short and fat which made it even more difficult and I didn't really want to spend money on a tool I will likely never use again ... thank you for explaining as you went along ...
Thanks so much for posting this. My car and a pheasant had an fight and the pheasant lost (which as a vegetarian was really sad for me) and the car’s headlight was smashed. I was told it was a main dealer supply and fix at around £300 ish. But I sourced the headlight from Eurocarparts and following your directions, refitted it myself. Thanks for your clear instructions, both on the video and as a PDF download. Also, the tool list helped me order the torx set I needed. Keep up the great work. Awesome!!!!
Top tip - draw round the bolts with a silver Sharpie. Will then go back in the exact same place. This will make sure alignment of the headlights. Not sure about the Mercedes puller tools as it's always best to use plastic tools on plastic.
Hello, i have not exactly the same car, but like you said in your other videos its twin alhambra mk2. But maibe you still may know, cause in this case of removing front headlight unit car bumper design slighty diffrent, than sharans.But just in case question is does there is posible to remove headlight unit without removing front bumber for seat alhambra too. Cause front bumber disign differs, and front main grill is inside the bumper, but not on top like in sharan. But maybe after removing front grill, with gentle bend of bumper, will i be able to access these 2 bolts in complicated place, in my case? I know how it sounds, but just in case you may know, comparing your mechanic knowlege are really great, comparing to mines. And sorry for my bad english.
Very sorry Darius. I don't have that car for a while, even more I'm not sure about Alhambra. I know one good Facebook group, very helpful: facebook.com/groups/1463201880401563/
My car was front damaged and I had seen that the distance between the emblem and front light is bigger as it used to be before the accident. What Could the reason be ?
Hi I would like to ask you about the change of the control unit J605 for the tailgate of sharan 7 n? Can you support me with this topic because i am still not fiinding this control unit in the car. Do you know the place of this unit in the car? Thanks in advance. You re the best in this field on youtube
Hi Peter! I will need to remove a bumper. I don't have that video yet for the front bumper. First, you'll need to remove radiator grill (I have a video about it): czcams.com/video/6qctUncsyqI/video.html Then if I'm not mistaken there should be screws under the grill, then some T25's underneath and in wheel arches. It's actually not that difficult. I have a video about rear bumper with parking sensors. Here it is: czcams.com/video/WnsgKW5jQkk/video.html
I don't have a fog light, so can't make a video. I can try to explain what my manual says. You have to unclip and remove plastic cover from outside, it will reveal bolt/screw, undo it and take light out, disconnect connector and unscrew bulb housing. Hope it helps.
I have a 2013 Volkswagen Passat in the US but the headlight unit on this Sharan MK2 appears to be nearly identical , this is the best youtube video I have found showing and explaining how to replace the entire headlight unit , not just bulbs ... this was easy except for the grill removal ... it took almost as much time to remove the grill as to remove and replace the headlight unit .. my fingers are rather short and fat which made it even more difficult and I didn't really want to spend money on a tool I will likely never use again ... thank you for explaining as you went along ...
You're welcome Rafael, glad if it helped 😊
Thanks so much for posting this.
My car and a pheasant had an fight and the pheasant lost (which as a vegetarian was really sad for me) and the car’s headlight was smashed. I was told it was a main dealer supply and fix at around £300 ish. But I sourced the headlight from Eurocarparts and following your directions, refitted it myself.
Thanks for your clear instructions, both on the video and as a PDF download. Also, the tool list helped me order the torx set I needed. Keep up the great work.
Awesome!!!!
Thanks Kev 👍
Glad if it helps 😊
Rest in peace pheasant 😇
Hi. My headlight sensor not working vw sharan 2013. Do you have any videos or suggestions. Thank you
Sorry Arif. So far I have no experience with headlight sensor...
@@wawayltd no problem. PS love your videos
It helped me out really well. Especially the trick how to remove the upper grill. Superb!
Thanks :)
Top tip - draw round the bolts with a silver Sharpie. Will then go back in the exact same place. This will make sure alignment of the headlights. Not sure about the Mercedes puller tools as it's always best to use plastic tools on plastic.
Thanks 👍
Merci
You're welcome 😎
Thank you!!Perfect
You're welcome
I thank you so much ...and I apreciated so much your work. It's so useful to me. I love my car, Sharan 2014 4 motion.
Thanks Mihai 🙂👍
Excellent video!!! Thanks! !!
Thanks :)
Great video. I have VW Touran 2011, is it similar procedure to remove the headlight?
Thanks, my manual says that you have to remove bumper. Then it's 4 bolts and plug.
Bravo 👍
Hello, i have not exactly the same car, but like you said in your other videos its twin alhambra mk2. But maibe you still may know, cause in this case of removing front headlight unit car bumper design slighty diffrent, than sharans.But just in case question is does there is posible to remove headlight unit without removing front bumber for seat alhambra too. Cause front bumber disign differs, and front main grill is inside the bumper, but not on top like in sharan. But maybe after removing front grill, with gentle bend of bumper, will i be able to access these 2 bolts in complicated place, in my case? I know how it sounds, but just in case you may know, comparing your mechanic knowlege are really great, comparing to mines. And sorry for my bad english.
Very sorry Darius. I don't have that car for a while, even more I'm not sure about Alhambra. I know one good Facebook group, very helpful:
facebook.com/groups/1463201880401563/
Vielen dank..!!! Du hast mir zu viel geholfen...
Bitte sehr :)
Thank you
My car was front damaged and I had seen that the distance between the emblem and front light is bigger as it used to be before the accident. What Could the reason be ?
Accident must be the reason 🙄
Great video, helped me a lot.
Thanks.
You're welcome :) There will be more about this car..
thanks a lot is it the same way to proceed with touran? v3 (2011) at the beginning I thought it was a touran and not a sharan
Not sure about Touran, but I would expect it to be if not the same then very similar.
Hi I would like to ask you about the change of the control unit J605 for the tailgate of sharan 7 n? Can you support me with this topic because i am still not fiinding this control unit in the car. Do you know the place of this unit in the car? Thanks in advance. You re the best in this field on youtube
Sorry Mariem, I can't find info about it :(
@@wawayltdThanks!
Hi do you know where the wiper relay is on the sharan 7n mine have stopped working. Thanks
Sorry Alan, I don't.
@@wawayltd Sorted - the control circuitry is on the motor itself- Got a used one - now works fine Cheers
Glad to hear it 👍
It's a good idea for a video for my channel... or your channel? 😉
Thanks
Many thanks :)
You're welcome :)
Hi
I would like to ask.
the last parking sensor in the front passenger's seat snapped.
how could I know best to get him to push in?
Thanks
Hi Peter! I will need to remove a bumper. I don't have that video yet for the front bumper. First, you'll need to remove radiator grill (I have a video about it):
czcams.com/video/6qctUncsyqI/video.html
Then if I'm not mistaken there should be screws under the grill, then some T25's underneath and in wheel arches. It's actually not that difficult. I have a video about rear bumper with parking sensors. Here it is:
czcams.com/video/WnsgKW5jQkk/video.html
I meant to say "YOU will need to remove a bumper.." :))
Hi
thanks for advice.
after I picked the radiator I got there.
according to the instructions: czcams.com/video/6qctUncsyqI/video.html
everything good
any chance you could show how to upgrade to facelift ?
No idea, sorry..
Thanks a lot! Can I ask how to replace the HID ballast?
Never done it before, so currently don't know, sorry :( Probably at some point in the future, when I'll have some time...
Hello, do you have some information on how to replace the fog lights?
I don't have a fog light, so can't make a video. I can try to explain what my manual says. You have to unclip and remove plastic cover from outside, it will reveal bolt/screw, undo it and take light out, disconnect connector and unscrew bulb housing. Hope it helps.
Thank you! Congrats on the great job in the youtube channel!
Head camera? Where from?
TW Randomz Argos :)