How Expert Mechanic’s Repair Caterpillar Wheel Tandem and Change Seal Kit
Vložit
- čas přidán 20. 10. 2022
- "Copyright Disclaimer under Section 107 of the copyright act 1976, allowance is made for fair use for purposes such as criticism, comment, news reporting, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favour of fair use."
Instagram:- instagram.com/
Facebook:- profile.php?... - Jak na to + styl
Still waiting for the expert mechanics to turn up. Meantime, there are these guys.
me too.
😄😄😄😄😄😄
@John Evans let them eat cake amiright
@John Evans - The wheel was still on at that point, the tractor would not have come crashing down.
@R Alan lol. You willing to bet your life on it? This whole video is insanity.
Would I be right in thinking that this isn’t an approved Caterpillar Service Agent ?
These machanic's have only caterpillar's workshop even only repair ND restoration of caterpillars things
CAT could not do this unless they had forklift impact and 3 people working and 5 watching
No these are factory trained technicians.
They are of a different parent company 😂😂
Their experts at everything, all their titles to their videos say so
Механики от бога прям! Все в пыли , грязи, зачем то заменили кольца в мосту которые явно не протекали и были сухими, запихали их не смазав, острой отверткой. С такими мастерам техника будет ходить вечно (нет) . В общем лучше бы не залезали, дольше бы проработало...
Это на какой государства?
Я вообще подумал, что они тормозные накладки полезли менять)
Дуо коны же поменяли, в чем проблема ?
@@offroadcaravanertraveler6176 проблема в том, что кучу грязи в узел засунули при этом. И проблема в том, что следов того, что уплотнения протекали нет
Ты прав! Работают,чтобы от клиентов был завал! Потому что там люди деляться на два типа,кто в мазуте,а кто с таким браслетом(когда он шестерню показывает) ему вообще п..хую,лишь бы работало,,а сколько ему тоже п..хую
Fred and Barney could not have done it better.
I always poke my new seals with a flat blade during installation 😂
Mike, your father and grand father probable did too.
The horn timing in the background was perfect cringe alert lol
You should use needle or knife. Works much better.
lol
The good thing is that safety is these guys first priority.
Safety costs money
👍🌹
@@YMH420s and life is cheap.
Wow that off angle jack really makes me nervous.
But hey props to them for doing what they can with what they have.
9:20 Opening elements with chisel and hammer or other screwdriver is going to leave perfect surfaces to seal.
13:22 Like always dirt sand is the best place to storage components that need to work in clean environment and are sensitive for hard debris.
14:40 Clean it with a cloth.
14:45 blow all dust and sand from another part into it.
15:23 Scratch the sealing with screwdriver.
16:33 Oh, there is a bearing you blow dust and sand on.
So - where is announced video with "Expert Mechanics"?
Expert mechanic is a oxymoron
@blazeykk you typing all this, get a life man go do something, instead of hating on people. Loser
@@toinewitteveen6907 find loser on your family. Ask your father. I am technician and see what is done wrong. Clear?
It’s about their determination and ability to do this work despite of a complete lack of resources and facilities. Everyone is not as privileged as you might be.
@@crisp619 No! It is about learning, developing and evolution. They have internet, they have money, they can see how it looks in professional shops and they DON'T learn, don't adopt good standards. They work in shitty way like their parents and grandparents. And their kids will also work this way. Low standards and they don't have will to improve it.
Somebody needs to change the oil on their work clothes!
That's the sole purpose of this"repair" .
а зачем меняли сальники если бортовая и колодки были сухие. для контента разбирали. арабские румыны
Так там же колодки сломаны,присмотрись. Раз сняли за одно и сальники поменяли
Притирочный песок как всегда бонусом)😆
А главное что эти парни знают все о технике безопасности 😂
I love the idea that anywhere they can fit a jack is a proper lifting point.
👍
That scared me the most. If that thing comes down its gonna be fast and messy.
Сальник острой отверткой запихивают, герметик на масло намазывают, редуктор в песок бросают - так держать))))))
так и сальник целый был,еще бы отьездил а новый побежит через неделю
Это вам не это!
These boys are just about to the limit of what can be done with strong backs and determination! Well done!
Very true 👍
- Как запрессовывать будем ?
- А давай потыкаем грязной отверткой в новый сальник ..
Забавные ребята рядом стоит экскаватор, но давайте использовать семи тонный домкрат .
Могли и клинешком поднять
детали тут же в песок складывают, сальники новые отверткой вставляют, а покрышка у которой корт торчит и дыры никого не смущает?
сальник который не бежал не смущает?))
И так сойдёт
Покрышка денег стоит, они ее из дерева потом выпилят
OMG the fact that no one died is what amazed me
посмотрел,как он сальник отверткой сажает-у меня чуть сердце не упало...
“Experts” 😶
Они там все попробовали его потыкать
Если он из плотной резины что ему будет то?
These are NOT experts. They are men using basic tools in tough conditions. The work is not great, it will just get the machine cc working again, who knows for how long.
Are you jealous?
Эти ролики надо показать на инструктажах по ТБ 😀
Safety sandals everyone remember!!! 🔥🔥🔥
при таких условиях работы в агрегат просто обязана попасть пыль и песок. так что этот ремонт не на долго, скоро понадобится новый.
Сальники отвёрткой, вообще высший бал маразма :) таких ремонтников к технике вообще подпускать нельзя. Им разве что навоз за ослами выгребать доверить можно, и то под контролем :)
И он будет вечный
Always very nice to see minions working. Safety flip flops and pro gear. But they do a very good job.
Sometimes these videos really are awesome in how they make repairs with minimum tools and facilities. But removing that wheel bearing cover by prying it off didn't make sense, there are jacking holes in the cover and some of the bolts remove will fit in them. Tighten those bolts in those holes and you pull the cover right off.
haha ...they never heard about this white men tricks.....
you can make it even easier, just tap on the center of the lid and it will come off by itself 😁
a place where men are men ........ females know their place........and sheep are nervous .........
a good fix with the barest of hand tools well done men be proud ........!
Very high quality and standard.
Those 1ton hydraulic jacks are best.
How did they learn to do this? Also, did you see the boss with clean shirt and gold watch?
Жаль нет видео где примерно в таких же условиях такие же ребята делают эти сальники.
A quick tip when installing duo- cone seals, spay oring with brake cleaner and quickly push it in. It allows the ori g to slide right in. You have to be quick
I prefer to use gasoline mixed with sand.
It's amazing watching people work in the dirt with the minimum of technology.
Жесть, как после такого ремонта техника вообще работает...
Нет. Это только для видео
САТ бессмертен
немножко песка в редукторах никогда не помешает!
Это притир
Это точно🤣
Абразив всегда полезен!
Гарантия, что клиент вернеться!
И после отвёртки, резинка в идеальном состоянии.
а в других условиях они работать и не могут, видео видео где такие же рабочие выплавляют из металлолома болванки, куют их в вал а затем вытачивают огромные коленчатые валы для судовых двигателей?
I'm totally into watching these type of videos
These guys would be amazing if they have a decent shop and decent tools!!!
It just goes to show that you can get the job done without all the fancy snap on tools.
Job well done gentlemen.
All those excavators hanging around and nobody thought to use one to sling the wheel off? Surely one was operational..
if it was your excavator would you like them using it as a crane for thier workshop ?
I thought the same thing
holy Jesus!! DIN ISO 9001 certified mechanics/workshop.
As resourceful as these guys are you would think they would have made a dual cone seal installation tool
send them one
They got one. Its a multi tool screwdriver, chisel, pry bar and seal installation tool. Possibly also a fork at lunchtime.
Fascinating ……..i think the seals should not be pushed into place with a screwdriver as this is sensitive to damage and this could damage the seal.
The Tire could do with a change as well. Great to see and thanks for sharing.
$80/hr here in Western Australia in mining at the moment. Only to imagine what these guys get paid working with basic tooling. Good effort lads
Thanks for commenting on my video❤️ and more thanks for your precious appreciation for these hard-work guys…visit again on my channel for more interesting videos❤️❤️ love from 🇵🇰
Doing the best they can with what they have.
The most important part about all this is, they got the job done and done right.
They are working the hardest heaviest job without proper tools, amazing.
Домкрат на гнилой пень. Н- надёжность. Про остальное вообще без комментариев. Супер ремонт
I love that there is always at least that one guy sitting on the side (or on the machine in this video) watching.
or under
I just really love the uniforms for work these people use and the steel toed shower shoes
I don’t think they care what you think of them, guaranteed %100 you wouldn’t do half of what they can 😂
Way to go guys! Watching from Ontario Canada 🇨🇦 🎉
For the tools they work with I must give these men much respect. We all should learn something from this video.
Thanks for comming on my video also thanks for your precious appreciation for these hardwork mechanics 😍visit again on my chanel for more interesting videos
Yes, we learn how not to make this repair. Sloppy, dirty work
Самое интересное не показали. Как они колесо одевать будут?
Поверь оденут они могут даже землю перевернуть 🙏😁
Не молча точно
These guys are awesome 👌 👏.
They did the best with the knowledge and tools they had to work with, but I still cringed a little bit at the guy using a flathead screwdriver to force in the axle seal rubber at 15:15 🤯
Very bad process for seating the seal. They didn't spread some oil on it.
@@Tsamokie You never spread oil on a duo cone seal rubber when seating, should be installed with evaporative solvent.
That flat head will be blunter than a baby's bum...
Expert Mechanic’s? Well well 😉
Okei, they did the job 👍
Рабский труд за копейки,и так сойдет.Можно и по три раза в неделю приезжать на ремонт.
Muito bom 👍👏
Amazing work accomplished.
The boys in Irving are tearing their hair out watching this.
I was expecting to see the hydraulic jack punch a hole in the axle housing there should have been a block of wood or steelbetween the jack and housing
love from 🇨🇦
As a heavy equipment tech in a "first world" country, I prob couldn't imagine dealing with your circumstances and still learning how do these jobs.
Keep up the great work guys!
You call it "great work"? Point me where it is great. They don't learn. Wacht videos on all pakistani mechanics channels and see that they still work in the same shitty way.
@@blazeykkyes I re-state they did a GREAT job.
someone take that wrench outta ya a** 🤣😂
imagine being so low that your shitting on ppl, that have less than you.
your hardest struggle is prob picking between brussel sprouts or broccoli lol
I think you regard yourself as more important than you actually are, stop being a master mechanic and eat your vegtables timmy😏
@@RADVIX313 So you are the same stupid as they are. You even can't answer the questions.
My rule is not to discuss with idiots. They they will drag you down to their level and beat with experience. End of discussion.
@@RADVIX313 Then you're stupid. You can't even answer the questions.
It's my rule not to argue with idiots. They will drag you down to their level and beat you with experience. End of discussion.
I'd be surprised if that lasts 1/3 the expected service life.
Un grand respect à ces travailleurs.
I do have to say I love there work please keep it up I know it's very hard work so work hard for you're money guys
Thank u so much for coming on my video 😍 and also thanks for your precious time and appreciation visit again on my channel for more interesting videos🤗 love from Pakistan 🌹
U.S needs hundred of tools to do this job professionally. They only need flatheads and screwdrivers to fix this 😅
Thanks for coming on my video 😍 visit again my chanel for more interesting videos🥰
Мы в 80х в колхозных гаражах тоже трактора и всё такое ремонтировали и не сильно технику безопасности соблюдали, но тут просто УЖАС какой-то. Начиная с установки домкратов и их использывание и заканчивая самой техникой. Да и сам ремонт явно на месяц другой и опять на ремонт надо ставить.
я удивляюсь что у них с такими работниками ещё и такое огромное население, там вроде должно бы ть минус миллионы. а не плюсы.
Tem que dar valor para esses mecânicos. Serviço pesado todo feito no braço. Muita força de vontade deles. Parabéns.
Vdd meu amigo os cara e foda
Tinham que vir os brazucas podres falar dos seus congéneres terceiro mundistas!😂
Torque wrench set to "good enough"
the cheap one are "Snap-off" close enough.....
20:10 you can really see the expertise in that pattern and precision torque wrench
10 grunts is the torque specified in the manual
Huge respect Best regards
The crooked log with a bottle jack also being crooked makes me feel so safe if I were to get under that thing. Aw well guess there is more people that brains over there if that flimsy jack were to slip.
Who cares? Their culture isn't imprisoned with the idea of "safety".
@@timbodnar6711 "imprisoned" lmao what an idiot you are
@@timbodnar6711 Not sure if you are being serious or not. The ideal of safety... Like going home with all my arms and legs? Or fingers and toes? Maybe not having to worry about dying due to shoddy workmen's ship? Although again when you got a population in the billions you got plenty of pawns if you need replacements.
Esses caras são muito voluntáriosos ao mesmo tempo que precários, qualquer oficina pé de cachorro no Brasil tem uma máquina pneumática, os caras são demais
Fantastici. E. Eccezionale 👍💯🌞😵💫👀🇮🇹💯👀💯👀💯👀
No jack stands
Prying off drum and plantery gear
Using a flat blade screwdriver on the NEW seal
Gear oil all over brake pads and wheel drum
This is a failed repair as they have no clue what they are duing
I'm glad to see some one knows just how bad these clowns are.
Poor little snowflakes crying. Lets see how your snowflake asses do under these conditions. Y’all wouldn’t last a day, clowns 😂
Jacks placed on and under slopping surfaces. A sure sign of experts at work.
But they did this 800 dollar job for 37 bucks all up
Imaging working under these condition get payed little ,risking your life doing this, yet they still have time to smile. Now this what i call hard worker. A big 👍 up to you guys . love watching what you do .
Throwing gears in the dust. Expert level.
I have so much respect for these people, they make a fantastic job , day by day.
Thanks for comming on my video😍 and more thanks for your precious appreciation,respect,love for these hardworking guys. visit again on my channel for more interesting videos🥰😊 love from pakistan 🇵🇰
Mis respetos a estos mecánicos que trabajan a puro pulmon felicitaciones!!
Two guys struggle mightily with a gigantic tire. After several minutes, one of them says, "We'll never get this thing off." "Off?" says the other guy. "I thought we were trying to put it on!"
Mate they are experts remember....xD
I wouldn't be using this method - can't imagine this is going to last
What method would you be using under these same conditions? They’re working with what they have available. That’s the problem with Americans, too Fking spoiled and can’t give credit where credit is due
Surrounded by all that heavy equipment and they don't think to use some of it the remove the tire? Maybe fix the things first that can help you with other jobs.
Would u want someone using your equipment to help with their other jobs?
@@HeLLLoKitTTyy69 YES!!
Ну в принципе еще лет 20 бы ходило, если бы не разобрали полностью исправный узел и не вываляли в глине и песке. Что это кстати за национальная традиция такая, с умным видом разбирать сложные механизмы и доламывать их?
Мне нравится, как они ничтоже сумнящеся все в песок кидают
Они сальник меняли, и в принципе нормально все сделали кроме того что в песок конечно кидать не стоит.
The expert mechanic’s have now left the chat.
Reported for misleading clickbait title
Just getting the tires unbolted is a feat in its self with no air……
Ремонт по всем законам машиностроения
Seems like these guys can fix/ repair
Anything.
Ah yes, the newest tool lineup, “Snap-Off”
Esse retentor pode ser colocado com barbante , da mesma forma que se coloca borracha de para-brisa
Next time used a plate under the tire with a grease for easy to slide
Gotta love the ppe
Love the supervisor turning up , complete with ruler to measure the progress , lol
How recognizing an "Expert Mechanic": he always is wearing safety sandals, safety pajama and is crawling in the dirt.
A lot of them must be retrained welders which were bilinded by arc.
What an ignorant comment to make. I don't know how much you know about the world but those aren't pajamas, even though you think it funny to say so.
These machanic's are on daily wages,only think work,and earn for his family/kidz,they not financialy strong only focus on work nd not take interest that what should they wear or not.
@@vissitorsteve Is "nightgown" the correct word for these stupid clothes most people in Pakistan are wearing while crawling in the dirt?
I see these people in England where they look exact the same but not have to live on daily wages because they get a monthly social pay check from the regime.
@@vissitorsteve muy buena tu respuesta amigo defender la ropa de uso diario de tu pais mis respetos para ti y tu pais pakistan
I watched this all the way through and couldn’t find one expert, maybe he was at lunch.
When Cat says, only mechanics that buy our special tools can work on these machines, these guys say, oh yeah, hold my goat milk.
I think I know why the last set of seals failed.... 15:30
Странно сальник не стали заваривать,а я так ждал
Я что-то вообще не понял нахрена они это делают, со стороны чулка сухо и на колодки трансмиссионка не текла. Получается от скуки бортовую 8 тонника ковыряли весь день?
Не нашли мастера с изогнутым электродом
@@nexgenua мастер просто был занят, в соседней канаве варил алюминиевый велосипед стальными электродами
@@user-xw7lk5hy9q коленвал наверное.
Это...гарантийный ремонт! Сальник варится только при срочном ремонте. Нужно знать матчасть.
Caterpillar will not approve, but the World approves. You work with the tools you have, and get it fixed.
quand je vois ces hommes travailler dur ,avec si peu d'outillage ,je suis admiratif .
👍🇮🇹😁👀
лужу, паяю, ЭВМы починяю!
Watch the last 10 seconds as he taps the hub face. Watch to see how much sand falls out of this thing. And the last 2 seconds we have the fella with camera ang gold watch giving the thumbs up.
Good job guys, get ur done.
I love these videos so much and what's even better is with it sped up like this it makes me feel like I'm watching and hearing minions from the kids movie.
❤️🌹
The fact they do this without cordless impacts or even ratchets is amazing.
the fact that no one died is what amazed me
Just drop the stuff in the dirt. Good place for seals and bearings. Such half assed work. Stuff must not last too long with such work methods.