Alginate Impression Tutorial and Demo

Sdílet
Vložit
  • čas přidán 5. 09. 2024
  • Alginate Impression Tutorial and Demo
    Selection of tray size
    Trial insertion of tray
    How to properly insert the impression tray
    Use rope wax if needed
    Instrumentation and preparation of tray prior to loading with alginate
    Mixing and Spatulation
    Loading tray
    Placing the tray in the patient's mouth
    Using cold water to extend setting time
    Removal from mouth - comfortably!
    Capturing of vestibule and teeth

Komentáře • 16

  • @daleadams6097
    @daleadams6097 Před 2 lety +4

    Clearly wasn't a good impression because they showed a metal tray with pink material not the blue tray with white material.

  • @missbee1330
    @missbee1330 Před 5 lety +3

    Thanks doc

  • @ylmldjaoxjskcnd1735
    @ylmldjaoxjskcnd1735 Před 3 lety +1

    What should I do if I have a terrible gag reflex and a really small mouth? I’m scared.

    • @EdiliaMarshallDMDMAGDAAACD
      @EdiliaMarshallDMDMAGDAAACD  Před 3 lety +2

      Try to find a dental office that can do a digital impression instead. That should help.

    • @daleadams6097
      @daleadams6097 Před 2 lety

      You can wiggle your toes, breath through the nose and I have water from the faucet as white noise.

    • @daleadams6097
      @daleadams6097 Před 2 lety

      @@EdiliaMarshallDMDMAGDAAACD that's great to ask for a digital but most don't so you didn't answer their question.

  • @mariaph9700
    @mariaph9700 Před 3 lety

    Dear dr. How do we know when to take this out? Is there any trick to “feel” the alginate based on the time indicated on the box? I notice that the consistency changes in cool and hot ambient temperature, i am not sure if this is true.

    • @EdiliaMarshallDMDMAGDAAACD
      @EdiliaMarshallDMDMAGDAAACD  Před 3 lety +1

      It is true that in cooler temperatures (both air temp and the temperature of the water you use) the alginate takes a bit longer to set and in warmer, it sets more quickly.
      First of all, use the recommended amount of time, then check the alginate that is still in the bowl. Once it peels out cleanly (no longer sticky or runny) it should be set. You can also double check the alginate in the tray - press on the alginate that is extruding from the front of the tray with the soft part of a finger (don't use a fingernail) and the alginate should bounce back (not indent) when it is fully set. I you're in doubt, leave it in a little longer.
      I hope this helps.

    • @mariaph9700
      @mariaph9700 Před 3 lety

      ​@@EdiliaMarshallDMDMAGDAAACD very good tip, thank you Dr. Marshall.

    • @EdiliaMarshallDMDMAGDAAACD
      @EdiliaMarshallDMDMAGDAAACD  Před 3 lety

      You're very welcome!

  • @djousthoughts7917
    @djousthoughts7917 Před 3 lety

    Don't you have to clean it after trying the tray in her mouth at first?

    • @EdiliaMarshallDMDMAGDAAACD
      @EdiliaMarshallDMDMAGDAAACD  Před 3 lety +1

      Not necessary if you are going to use it on that patient, unless it became soiled somehow.

    • @djousthoughts7917
      @djousthoughts7917 Před 3 lety

      @@EdiliaMarshallDMDMAGDAAACD oh okay, thank you so much for replying.

  • @keviigreen4867
    @keviigreen4867 Před 3 lety

    What is the name of the adhesive used ?