Please never delete this video! I always go back n watch it every now and then because you showed me this and my car used to sound like with the same plate.
@@jeffsvids9590 I still have my car, I just moved to a place where it was hella illegal to drive with a modded car so I went back to stock. But now I’m living back home because it was too expensive to live there. I’m gonna install that amazing (cheap) sound plate, throw on the cheap DIY intake, and do the muffler delete again. And BAM! Car sounds sick again! 🤤 especially since it’s a manual. The car is slow, but that’s all I do is drive slow lol 😂 it just sounds so good All the Time! (I love my car) 😂
@@jeffsvids9590 that’s awesome bro, welcome to the veloster family! I’ve been a fan of cars my hole life, however, I would rather own a 1st Gen Veloster Turbo over every car in the world. Favourite car hands down. 🙌 If I was you, update the exhaust: cheap muffler delete or MBRP exhaust. Blow off sound plate or HKS blow off valve $300-$500 air intake, or DIY $35 intake. It’s up to you what you want to do. And just gonna say 1 thing. Some people don’t like the “annoying” air induction sound the Air Intake makes when you accelerate.. however, MORE people Love It.. including myself 🤤 And also,,, you’ll turn a LOT of heads with all these mods haha 😆
I think I watch this video more than every other CZcams video out there lol. I put my sound plate back on btw, I’m no longer living in a “quiet vehicle only” location 😏
So just found this video. I have a 15 VT. You said you had the hose capped/taken off. Does it sound better/louder with the plate than just the hose off??
@@kevindelgado3599 no way its just a muffler delete with that turbo sound coming out. There has to be a downpipe. I've got a muffler delete and intake on my 16 Rspec and you can not here the turbo from the exhaust at all
You clearly dont know how much car parts cost not to mention you should get your car tuned after installing a different bov. Part is under $100, so have fun finding a bov thats not from wish🤷🏽♂️
Please never delete this video! I always go back n watch it every now and then because you showed me this and my car used to sound like with the same plate.
Did you sell it? If so why?
@@jeffsvids9590 I still have my car, I just moved to a place where it was hella illegal to drive with a modded car so I went back to stock. But now I’m living back home because it was too expensive to live there. I’m gonna install that amazing (cheap) sound plate, throw on the cheap DIY intake, and do the muffler delete again. And BAM! Car sounds sick again! 🤤 especially since it’s a manual. The car is slow, but that’s all I do is drive slow lol 😂 it just sounds so good All the Time! (I love my car) 😂
@@tristanmac9287 Awesome! I just bought a 2013 , and want a little extra from it.
@@jeffsvids9590 that’s awesome bro, welcome to the veloster family! I’ve been a fan of cars my hole life, however, I would rather own a 1st Gen Veloster Turbo over every car in the world. Favourite car hands down. 🙌
If I was you, update the exhaust: cheap muffler delete or MBRP exhaust.
Blow off sound plate or HKS blow off valve
$300-$500 air intake, or DIY $35 intake.
It’s up to you what you want to do.
And just gonna say 1 thing. Some people don’t like the “annoying” air induction sound the Air Intake makes when you accelerate.. however, MORE people Love It.. including myself 🤤 And also,,, you’ll turn a LOT of heads with all these mods haha 😆
@@tristanmac9287 Hell ya! Exhaust, Bov, catch can is on my list. also thank you for the welcome!
I think I watch this video more than every other CZcams video out there lol. I put my sound plate back on btw, I’m no longer living in a “quiet vehicle only” location 😏
What a strange place to have a BOV.
I would hate to drop a bolt in there.
Any way great video and sounds great
Is your BOV plate still running good, I might buy one
win King I did this to my Subaru around 9 months ago RUNS PERFECT u might lose some torque but nothing a tune can’t fix
Looking to do this on my tucson did you line the kidney shaped hole up with the existing from the turbo?
I believe so
Sounds so great
Mine is going on a 2017 Tucson 1.6T sport. But I figured if it goes on a certain way on yours that it has to go on a certain way on all
Nice car!
You got some dirt on your face, but great video. Good to see you making content again.
Hello! The intercooler outlet to the intake is also canceled (clogged)
You said this is the adapter plate for a honda civic si? Im looking to do this mod, wanna make sure i order the right one
nick degrace they sell them for the veloster but the one i had i happened to get from a friend who had a new si
nick degrace If you are worried about getting the right one by one on SoCal garage works website
The civic 1.5t has the same plate and will work
Is this bad for journal bearing turbo on max 15psi when pulling hard?
It should be perfectly fine
So you have the regular bov from the factory? You just changed the plate underneath and u can hear a differences?
Correct
Is your BOV plate still running good, I might buy one
win King it is beautiful still love the sound to this day. 100% worth it
Thanks for the quick reply
Any time im always ready to answer questions
Did it throw a mas air flow check engine light?
@@kitt5286where did u get the spacer ??
How did you make your veloster to do all those crackles ? 🫣🫣🔥🔥🔥🥹sounds hella good
Is there any certain direction you have to put it on or can you just slap it on and Bolt it shut?
You have to match it to the factory plate that was there
So just found this video.
I have a 15 VT.
You said you had the hose capped/taken off. Does it sound better/louder with the plate than just the hose off??
It sounded much louder and defined with the plate
@@kitt5286 awesome. Guess I know what I'm getting next. Thanks man.
So you set the sound plate on top of the existing bov plate ?
No you remove it
What was that thing you pulled out at 5:27???
Factory diverter plate. Thats what is changed out
@@kitt5286 so is it okay to pull that out completely?
@@LifeOnTwoWheels correct
@@kitt5286 thanks for your reply
Do I need a tune if I set up a bob on my veloster?
*BOV
Not required but highly recommended
So it's okay if I leave the recirculating hose I just attached the plate
Yes it is ok just make sure to cap the inlet into the intake
@@kitt5286 Awesome thank you for your help brotha.
@@thesushininja6480 any time unfortunately i dont have the car any longer it was destroyed by a intoxicated driver without insurance or a license☹️
@@kitt5286 one more question do I have to remove the base plate?? Im so sorry to hear that the car is so fun and it catches peoples attention.
Sounds the same , I just removed the rubber line to the stock plate . To me it sounds the same . But hard to tell in a video
I did that at first but it was much louder and defined with the plate
@@kitt5286 where did you get the plate from ? I was looking into maybe just an actual bov instead of the diverter valve itself
I personally would get a real bov if you have them money i can’t remember where i got it from
What’s your exhaust setup? Those pops sound more than a muffler delete
Riley O'Connor swear to god stock exhaust with a muffler delete but its custom fabricated from the axle back
Davila RTD that’s wild. Thanks for the fast response
@@kitt5286 have you had any issues with back pressure?? When I did a muffler delete I had INSANE evap issues…
@@trevorkates3587 none back pressure has nothing to do with evap
still running good any lights?
MAra chan i no longer have the car it was totaled while parked but the time i had any light it was due to a failed coil pack
What’s been done to the exhaust?
In the beginning he said he had the muffler deleted only.
@@kevindelgado3599 no way its just a muffler delete with that turbo sound coming out. There has to be a downpipe. I've got a muffler delete and intake on my 16 Rspec and you can not here the turbo from the exhaust at all
@@coreybaker2485turbo sound could be the aftermarket intake?
Will it work with hks bov
If you use a hks bov you wont need this plate you need a adapter plate for the hks and thats it
Would this make my car fail smog emissions in California. I have the 2013 Veloster turbo been hard finding parts.
Joshua Kale not sure i live in cleveland and i now no longet have this car it was totaled by a intoxicated driver
scgarageworks.com/
A ton of veloster stuff on here ❤️
@@BedazzledChanclas thank you
Joshua Kale hope we get to see your build in the future 👀
@@BedazzledChanclasI'll post a video on my channel hopefully in the near future thanks again for the link
Why would i buy a sound plate when i could get an actual BOV for probably the same price. You shouldn't work on cars. Dont ceap out on car parts
You clearly dont know how much car parts cost not to mention you should get your car tuned after installing a different bov. Part is under $100, so have fun finding a bov thats not from wish🤷🏽♂️