Mantus Anchor System Upgrade on a Ranger Tug R-23
Vložit
- čas přidán 23. 12. 2022
- The Mantus Anchor system is a great anchor system for your Ranger Tug R-23. This video walks you through the evolution from the factory anchor system to a complete Mantus system. We couldn't be happier with the results. This video is not sponsored.
Parts list:
-NoWear Chafe Guard: www.nowearguard.com/shop-onli...
-Mantus Swivel: www.mantusmarine.com/mantus-s...
-Mantus Anchor Guard: www.mantusmarine.com/mantus-a...
-Mantus 25lbs M2 Anchor: www.mantusmarine.com/m2-anchor/
-Mantus BR1 Bow Roller: www.mantusmarine.com/bow-roller/
-Anchor Tensioner: thmarinesupplies.com/products...
Ironically Dave, you presented this thorough discussion on your evolving anchoring system without ever discussing your anchor choice. A stock Lewmar claw held on Lake Normal, a Danforth held at Holden Beach, and then Voila! there's a 2nd gen Mantis on the bow. Not a Vulcan nor other Rocna nor earlier gen Mantis. Felt like a missing important step.
I only mention this as I'm now facing a similar choice for a Cutwater 248, a kissing cousin of your R23 but with an anchor platform that won't accept a roll bar. Bet you weighed the anchor choice thoroughly before deciding.
Hey Jack. I missed replying to this and just noticed. I went with the Mantis based on the rest of the system (Bow roller, Swivel, Bridle, Snubber, bow stop), so the anchor was a natural fit. I didn't want to deal with the hoop on the end of the M1. The M2 had great reviews and we have been extremely happy with it. We were on a lee shore anchorage overnight near Vero Beach a few weeks back and she held firm through a very uncomfortable night. Very happy with it.
you use a stern anchor as well? a lil extra security helps
We do have a second anchor on board to use if necessary.
no new videos?
Can you provide the swivel you used on the factory chain and anchor before you switched to the mantis full setup? I’m a fellow R23 owner on the west coast of Canada, also if your interested I swapped my factory stove for a propane 2 burner with a 5lb tank in the rear cockpit it’s fantastic
I used the Mantis S1 swivel with a smaller shackle to fit the factory anchor. Mantus is running a 20% off promotion right now, too.
And YES! Very interested in your stove solution!
Good video , i switched my two Rangers over to Rocna anchors . My question has always been , why do we have to spend extra money for proper gear ? When you spend this much money , most of us would have paid a bit more for top notch equipment ? Or am I wrong ? I think of anchor , shore power connection to a ''smart plug '' ( less electrical fires ) . My first R27 Diesel , i built a removable step , for easy engine service . Why are tanks not accessible ? what happens if you have a leak ? pull the boat apart ?
With any "sport" Hobby" or "life endeavor" there is an entry-level price, and all the upgrades are personal preferences, or they are included in the next year's model.
In my opinion, it all comes down to priorities. Every boater has different ones, and every boat is a compromise. To appeal to a broad audience, at a price point that makes sense, they can’t go “top shelf” on everything. Like I said in the video, we used the factory setup and gradually improved it over time, just like I’ve done with just about every system on the boat.
@@CruisingElvinRay i see your point also , Thanks for the video .
@@briangaquin1021 yes , would be nice to be an option for next years model .
Sorry swivel size appropriate for chain grade
Music is really unnecessary
Then maybe you should forward through it like I do when I don’t want to hear someone’s music. I do it ever week on a couple people I follow. Just a thought to ease your distress.
So was your comment