Twin Turbo C8 Z06 Build and Dyno Runs! SOUNDS AMAZING!!
Vložit
- čas přidán 12. 09. 2024
- We got our Twin Turbo C8 Z06 finished and now ready to run and drive! Let's hit the dyno and see how much power we make! Let's dive in this video on the full build, details, and tricks we learned on this combo..
What do you guys think of the power gains! Very impressive for just 93 octane on baby boost! Huge thank to Michael and the whole ETS group to helping us put this kit together!
Z06 Turbo kit:
boostdistrict....
Will this setup mimic a Corvette C8 ZR1? Let's find out!
Want your C8 built by the baddest shop to specialize in these cars?
Check out our links below:
*For all your parts and install needs, contact us*
Parts email: boostdistrict21@gmail.com
Builds/Installs email: installs@boostdistrict.com
Call us: (817).210.6699
shop online: www.Boostdistrict.com
#c8corvette #corvette #stingray #turbo #supercharger #foryou #nitrous #engine #horsepower #zr1 #c8zr1
Let's Collab: @ParagonPerformance @ExtremeTurboSystems @LingenfelterLPE @HorsePowerObsessed @BrinkofSpeed @FrontSeatDriver
![Building a Lemon 2024 Mustang GT in 32 Minutes! [Full Build]](http://i.ytimg.com/vi/wOOr7Utdfyk/mqdefault.jpg)
I usually see people making monster c6 but seeing a c8 turn into a monster is so proper
Huh? It made 120 hp extra...
Adding 120hp does not constitute a monster. 🤦
I don't give shit what yall think. Sound spoiled to me. Go buy it and yall do some shit. Probably can't so shut up 😂
@@jcstream1 you sit in your accord close your eyes and make believe it’s a C8 right?
@@Uranswer-yu5kp camaro but go off lol
Let’s go! Thanks for giving us the opportunity to provide you with a turbo kit for the z06! One down, lots more to go! 💪💪 - Michael
@@ExtremeTurboSystems those exhaust welds were 🥵🥵🥵
I can say coming from the Evo community that I’m extremely proud to be getting an ETS kit on my C8. 🤙
For 3.5 pound of boost at that drive train loss my gawddddd that’s 800 plus lol with zero tweaks at all imagine fully forged on 30 PSI that’s 36 hp a pound! That’s 1100 whp unreal the ZR1 truly is unbelievable
Wouldn’t even have to change much. Probably just swap the pistons for a dish design to lower the compression and obviously forged and be safe to run 10-15 psi on all other stock components and get 300whp gain.
15 psi should easily put it at over 1000whp
Probably even under 10psi will do it on twin turbo setup like that. @@BrunoCorrêa-b2k
King rabbit, if upgraded a few parts and having 15psi, its going to make way more than an extra 300hp... 7-8 psi would get you an extra 300...15psi is probably going to make more like 600ish more hp if supporting mods are done right...ecs tt z51 added twin turbos and that car made 624hp just on 6lbs of boost...the support mods and correct sized turbos are everything when adding higher boost...
@@danksnowrain7652 things would change tho. Bring compression down. (Lowers power). Stuff like that. So id say around that would be 300. But hey i could be completely wrong 🤷🏻♂️
You guys NEED to supply USED C8"S in low milage condition with your twin turbo kits installed and sell them as SPECIAL BOOST District cars? Just like MOTION and YENKO did in the late 60's.....only thing is you supply at least 200 HP MORE than they did! Bet you could sell a nice C8 with an LT2 and turbo for $120,000 and beat most everything at the track!
Honestly, it was cool to see the awesome fitment of the AEROLARRI wheels with the bumper off. Great work guys. Killing it!
You guys are awesome...I will be hitting you up with my future E-Ray...
Bro that is absolutely amazing! And I love that Bandido setup of the Corvette, drop dead gorgeous.
thank you Bruce!
Well done sir. Keep 'em coming!
WHY IS DUDE SO CAKED UP?! LMAO @4:12
gay asf
I've been into cars, bi turbo'ing, twin turbo'ing, twincharg'ing (which is my favorite), I'd love to see you guys twincharge a C8 and listen to that with an open exhaust. My ears already hurt!! Lol. Loved this build, love this C8, more more more!
Congrats on the channel that's about the be the biggest in YT for the next Vette! You beat Paragon and others so nice work!!! I haven't seen a boost through in a minute, very clean. Keep that off-road/business use/racecar registration setup handy to avoid all dem fines in the US (ask me how I know). Michael has helped me out with Evo's, STI's, GTR's and custom work... those dudes out in the west coast are hands down the best!
When the rear goes splashing into a puddle of water 🌊.😂 Good luck 🍀
Wild!! Only 3.5 lbs is amazing. Imagine built engine with 35 psi.
Wow yall did it! And it still sounds amazing like the z06 compared to the zr1
Oh. My. God. Great job, guys!!
Excellent design: replace the stock airfilter with an intercooler and put the new air filters on the turbos.
Black and gold looks insanely incredible. 120 hp gain for 10k or more, not worth the cost per hp. Plus the bottom end is week. The c7 had strong bottom ends to boost anyway you want and drive daily.
Nice...but I have an issue with Trans Am decals on a Corvette...if you want a Trans am...buy one.....I did
Yeah. That doesn't make any sense. Maybe a trust fund build?
@@IndependantMind168 and.. anything other than a Torch Red Corvette makes no sense to me either...
That sounds monstrous 😊😊😊😊
Sounds insane
120 hp for 3.5 lbs is crazy
High compression ratio would do that. Just have to be safe and smart with it
@@drummerdoingstuff5020ZR1 pushes at least 20psi. They’re definitely not pushing this car as hard as they could.
@@gavindrewry8652ZR1 is lower compression
@@728GT Yes, but 3.5psi is nothing in comparison
The first 3-5 psi are the most transformative. Just the slightest bit of positive pressure really helps everything work considerably better.
Solid video man!
Glad you liked it!
Thats massive gains for 3.5 psi. Plus tiny turbos so the boost hit is instant!
Lol. A pulley and headers will get you 120 whp on lt4. What a waste.
@@user-iz4xe1ep9h Yeah nothing really beats the simple, reliable & compact power & torque of boosted LS & LT's. Not to mention the completely even power & torque numbers. But Id love to see an n/a, tt, or supercharged.. High revving, de-stroked LT1/2/4/5 build, with lightweight forged internals & fancy heads/valvetrain.
Something like 5-5.5L, with less low end torque, but linear power up to 7.5-8k+ rpm.. a real exotic feeling screamer. (Similar to what Katech did with their 8500rpm destroked LS7). Its absolutely glorious🙌🇺🇲
Great build. Just waiting to see when my build might make the cut for a BD video 😅.
Keep up the work and looking forward to the Corvettes at Carlisle vid.
Thank you for the support! Which car is yours?!
@@boostdistrict CMG ‘22 getting the BD700 TT package.
Super impressive as always man! Keep it up!
Your kits are tuff! 😠 Love your content.
BoostDistrict: "We made a twin turbo ZO6 with over 700 horsepower!"
ZR1: "Hold my beer"
holds beer and shows of the BD1200whp shop ERAY ;)
Really enjoy your videos keep up the good work
Wow this makes the new zr1 a bargain! GM thanks you!
Hello are you from Guyana,? Nice cars nice video man😎👍✌️car sounds like a McLaren 😮
If you guys are at Carlisle next year would definitely like to setup an install at the show if you will be offering that. That TT setup is nice and by then there should be some more hands on and lessons learned on the setup.
Bro that exhaust tip alone probably costs as much as a brand name turbo
How are you knocking other peoples work and using rubber hose with worm clamps on the turbo drains. That’s not very high end or heat protected right behind the down pipes.
No literally what i was thinking, they boasted about there clean wire tuck specialty but can’t make a solution to the ugly worm clamps and black rubber hose.
what a MONSTER!!!!!
Hopefully they come out with the Zora which would be ZR1 + Eray and then hopefully you guys put this kit on it compounded into the stock turbos.
Yo I am back to say that you could also fill the trunk with nitrous bottles or intercoolers
17:00 is what all of you have been waiting for
‼️like boost baby‼️🫡🫡
Nice car. Ready for some 60 rolls. This is what I like to see. Have fun men. Peace
BOOSTED BANDIDO
Boostdido!*
Awesome guys!
Beautiful car!
Does this come with the equivalent of the GM warranty? If so, I've got a 2024 Red Mist Z06 convertible that's available. Looks great btw! Thanks!
😂
That thing goes and then all of a sudden it goes some more
What kind of durability changes were made to the gearbox? Naturally, something substantial has been done?
If it’s running that low on boost shouldn’t have to mess with the trans unless you’re going all out.
All bolt on no internals changed for boost? And Trans also? ;-(
Why in gods name is the Screaming Chicken on a Corvette. While I can appreciate its in the GM family, but that’s as bad as Ford putting the Mustang name/logo on an electric car. It’s sacrilegious!!! Other than that, beautiful car and clean build, waiting for someone to finally unlock the ECU and get a proper tune. This may be a dumb question, but couldn’t you just go full Motec or something similar for engine management/tuning?
Fucken love the zo6
if you listen to the exhaust note as he revs very carefully, you can hear the precise moment Ferrari shat themselves
Hinelesty the eras is probably the best one
I would have definitely been conservative on boost myself
I'd set wastegates to like 9 or 10 psi and hope for 8
As in one pound of boost per cylinder
This all seems a little redundant since the launch of the ZR1?
You're amazing. ❤
so, is this just on the stock tune? the ecm can compensate for the boost stock??
That air intake in the back of the rear wheels... no way to bring that at the top?
Looks clean, so nicely done! What’s the deal with tuning and transmission. Transmission handling HP/TQ increase wihout tuning, clutch upgrade, pressure switch… anything?
not needed for this power level.
Amazing work!
So you they made a ZR1
Love this channel but this dude can talk. When uploading you can select "Chapters" which will timestamp automatically what's going on in sections of the video in case people want to skip around. Was cool to see the timelapse build.
we're not youtubers. this channel is more for education and discussing the parts we sell and cars we build
Get green filters sir.
sick build, please tell the camera man to keep the frame in focus!!!
Your color of purple is the color of purple they should've used for the ZR1.
You could do better than hose clamps on the turbo drains since you are flexing...
I would be more impressed if someone can figure out how to put in three peddles in a C8. Manual 7spd transmission.
Matt field the formula drift driver has been working on a manual c8 drift car for a while. There’s a build series on his channel but it isn’t complete yet
On the z06 the fender already has the space for the turbos like the zr1, just wondering if yall noticed.
z06/zr1/stingray/eray are all the same inner body. Turbo location of the zr1 makes it compact but the location leaves a ton of heat in the engine bay itself.
very nice but I'd be worried driving it in the rain. A whille ago bmw for certain models had the issue where at highway speeds and raining, water would get into the engine and hydro lock it. they had the intakes very low in order to capture cooler air.
there is a valence and underpanel that keeps everything secured and tidy.
Any concerns about driving in the rain? Can water get ingested?
We've covered this on our previous turbo videos.. if your turbos get soaked, you have bigger issues. The OEM ECU is in the same height level As the turbos and inlet. I definitely wouldn't drive in flood, but rain will be ok.
I wonder if u can take the z06 intake own a sting ray
Can you build a twin Turbo supercharged car??
Stingray.
yes we can
A lot of people are going to lose a lot of money on C8 Corvettes. I’m sure you’ve all been introduced to Mr. C8 ZR1. 1064 HP and over 800 ft.lbs. torque…..
What brand wheels and tire comb?
stock tires- aerolarri wheels.
Yeah, the engine might be fine, but without tuning those DCT will eat shit because you are putting an extra 100+ hp through those clutches without telling the TCM to compensate with higher line pressures and shift pressures. Same thing happens with Cicio turbo C8 cars, even with upgraded clutch disks.
luckily we know what we're doing with these cars :)
Supercharging this thing would have been a lot more interesting since the ZR1 is TT.
this engine wouldn't be happy with any type of supercharger drag.
@@boostdistrict The Z06 was designed for more than just a straight line
@@UltimateDan1 highly aware. There's a lot that goes into building a power adder, that doesn't only focus on power delivery by itself.
How is this tuned?
Sounds like Dog Squat ......😂
Some owners dont want 1000+ rwhp I guess. I dont see the point in a twin turbo at 3-4 psi. Thats like a setup i would run with an already supercharged car making it a compound setup.
3.5 pounds of boost??? 😭😭 crank it up to 20-25 and this thing would be an absolute demon 💀
z06 comes stock with 670hp
That’s crank not wheel
I love what you guys are doing with these C8s but I'm having serious issues getting timely and thorough responses over your email support.
our office was closed thurs/fri for Corvettes at Carlisle. We're back and all emails have been replied
@@boostdistrict I did get a response. Much appreciated
Flash ECU??
Where's the shop truck video
does the global b work on the z06 to tune also?
not the same. z06 uses a Bosch ECU
Can you max mine max 1000 whp?
That’s a Z06 BBL. Put a diaper on it.
Wow
4theluvuhhgawd. Not the Pontiac firebird on the hood of a Vette?! 😬🤦♀️
It’s not a firebird. Mexican Eagle 🦅 😊
Ignorance is bliss.
a zr1 competitor?
Not quite, but fun!
Not sure why the car is trying to be a Teams Am 😂
Why fire chicken themed?
19:32 - it looks what?!
Supercharger cost less tho
It’s called a zr1
Seriously? You put Firechickens on a Corvette? You put Bulls on Ferraris too?
I get it. Great build. I want to see what its going to make turned up. And see if it can take on its previous successor. Lt4s make 900wheel plus on stock bottom and a ported blower. Hhmmm
with a built LT6, sure. no reason to chance it otherwise.
Thompson Melissa Smith Richard Thompson William
Wastegates? Didn’t see them
Precision WG. All tucked nicely
Bro Just put on 2 big turbos and worried about reliability
always
$30k?! For only 120whp?
Why the hell do you guys have a Trans Am bird on a Corvette?
Who ever did your beard should get 3 months in prison
american SVJ