Jesmonite Sheep and Lemons Design Coasters and Trivet Kitchen Homeware

Sdílet
Vložit
  • čas přidán 8. 02. 2022
  • #Jesmonite #SealingJesmonite
    Heyyyy lovies, In this video I am trying out a brand new mould from Amazon (linked below) I am using Jesmonite AC100 to create two sets of coasters in a Sheep design and Lemons design. I am using Squeezy bottles to pipe the design on to the silicone mould. I am head over heels in love with the Jesmonite Sheep. Let me know in the comments if you have tried any designs. I am also showing how to seal Jesmonite and the method I use that gets the best jesmonite sealed effect.
    Products used on my channel can be found on my Amazon Storefront:
    I am an Amazon Affiliate. I earn commission from purchases which help me and support my channel.
    UK Amazon Storefront
    www.amazon.co.uk/shop/claires...
    USA Amazon storefront
    www.amazon.com/shop/clairescr...
    Patreon
    / clairescraftycorner
    Patreon is a subscription service. I currently have one Tier. ‘In the Crafty Corner’ you will have EXCLUSIVE access to behind the scenes, photos, polls and engagement with other Patrons. I will also be sharing future project ideas and would love your input in these projects.
    My published order books on Amazon:
    Resin Order Book:
    UK: Resin Order Book: Amazon.co.uk: Burgess, Claire: Books
    USA: Resin Order Book: Burgess, Claire: 9798524919496: Amazon.com: Books
    DE: Resin Order Book : Burgess, Claire: Amazon.de: Bücher
    FR: Resin Order Book: Amazon.fr: Burgess, Claire: Livres anglais et étrangers
    ES: Resin Order Book: Amazon.es: Burgess, Claire: Libros en idiomas extranjeros
    IT: Amazon.it: Resin Order Book - Burgess, Claire - Libri in altre lingue
    JP: Amazon.co.jp: Resin Order Book : Burgess, Claire: Japanese Books
    CA: Resin Order Book: Burgess, Claire: 9798524919496: Books - Amazon.ca
    AU: Resin Order Book - Burgess, Claire | 9798524919496 | Amazon.com.au | Books
    Woodturners Order Log:
    UK: Woodturners Order Log Book: Amazon.co.uk: Burgess, Claire: Books
    USA: Woodturners Order Log Book: Burgess, Claire: 9798525060258: Amazon.com: Books
    DE: Woodturners Order Log Book : Burgess, Claire: Amazon.de: Bücher
    CA: Woodturners Order Log Book: Burgess, Claire: 9798525060258: Books - Amazon.ca
    AU: Woodturners Order Log Book - Burgess, Claire | 9798525060258 | Amazon.com.au | Books
    Non Specific: Order Book:
    UK: Order Book: Claire's Crafty Corner: Amazon.co.uk: Burgess, Claire: Books
    USA: Order Book: Claire's Crafty Corner: Burgess, Claire: 9798524865816: Amazon.com: Books
    DE: Order Book: Claire's Crafty Corner : Burgess, Claire: Amazon.de: Bücher
    FR: Order Book: Claire's Crafty Corner: Amazon.fr: Burgess, Claire: Livres anglais et étrangers
    ES: Order Book: Claire's Crafty Corner: Amazon.es: Burgess, Claire: Libros en idiomas extranjeros
    IT: Amazon.it: Resin Order Book - Burgess, Claire - Libri in altre lingue
    JP: Amazon.co.jp: Order Book: Claire's Crafty Corner : Burgess, Claire: Japanese Books
    CA: Order Book: Claire's Crafty Corner: Burgess, Claire: 9798524865816: Books - Amazon.ca
    AU: Order Book: Claire's Crafty Corner - Burgess, Claire | 9798524865816 | Amazon.com.au | Books
    Social Media accounts: linktr.ee/ClairesCraftyCorner...
    Epidemic Sounds Referral Link: www.epidemicsound.com/referra...
    10% off at Let’s Resin
    Use code: CCC10 for Resin, Inks, Glitters Micas and Powders
    Use code: ClaireCCmold for Let’s Resin Silicone Moulds and other supplies.
    Affiliate link to Let’s Resin Amazon store:
    www.amazon.com/letsresin?maas...
    Chameleon Flakes:
    www.amazon.com/dp/B0957JLWTK?...
    Chameleon mica powder:
    www.amazon.com/dp/B092D6Y2S4?...
    5% off your order at ‘Molds and Shapes’ using my code CCC5 at the checkout:
    moldsandshapes.com/
    Moulds are made to order and they ship worldwide.
    15% off across the site at Hemway
    www.hemway.com/ using my code: ClaireBurgess at checkout. (One word no spaces)
    All products listed will not cost you anymore than buying the same product outside of the link. However, if you use my link I get support from Amazon for my channel.
    Please do your research for these products I cannot be responsible for the product if not to your liking. Responsibility lies with Amazon.
    Everything I do in my video is my way of working.
    You may choose to work differently and what I show you here is just an example.
    I am a full PPE Resin Artist. Please take responsibility for your own safety and wear the appropriate Respirator, gloves and eye protection. Work in a well ventilated area.
  • Jak na to + styl

Komentáře • 136

  • @dianebuckley6028
    @dianebuckley6028 Před 5 měsíci

    Glad you mentioned the sealer as I need to purchase this and your design is lovely 😊

  • @Spiceyspiney
    @Spiceyspiney Před 2 lety +3

    These sheep coasters are just the best! I have a house full of sheep related stuff, and for my birthday this year my brother bought me a "Beware - crazy sheep lady!" mug LOL!

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      ahhhhhhh no way Mary ha ha I love that xxx I will have to make more these were so popular xx

  • @kris_kreations
    @kris_kreations Před 2 lety +3

    So cute, Claire. I really love the sheep. The lemons are not too shabby, either. I love the color contrast. 🔥

  • @ellishansen8115
    @ellishansen8115 Před 2 lety +2

    I'm American and I'm going to use the English exclamation gobsmacked for your sheep coasters!! Honestly I don't think anyone could make them any better. They are cute, beautiful, and you should be very proud of them. The lemons are nice too, but the sheep are outstanding!!!

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +2

      heyyyyy Ellis thank you so much my lovely xxx haaaa love the Gobsmacked lol

  • @windchaser12
    @windchaser12 Před 2 lety +1

    Jesmonite... the new resin and those sheep are simply too cute! Well done, dear. :)

  • @kellyjean4981
    @kellyjean4981 Před 2 lety +1

    I love the yellow/green/orange combo!!! haha as I wrote that, you were saying how much you like the combo as well.

  • @yvonneellenberger9350
    @yvonneellenberger9350 Před 2 lety +1

    love them claire, they could have a nice home, at my kitchentable .... your work is always great

  • @Toonpish
    @Toonpish Před 2 lety +1

    The sheep are wonderful 👌⭐️🎉❤️❤️❤️❤️
    The lemons are gorgeous too.
    Those bright colours are gorgeous 😍😍
    Learnt a lot from this video Claire as I always do with your jes videos 😀😀😀
    Beautiful sets Claire ❤️❤️❤️❤️❤️

  • @DorianneDelageArt
    @DorianneDelageArt Před 2 lety +1

    These sheep coasters are so cute ! And the lemon coasters give peps ! Thank you for inspiring us !💙💙💙

  • @SkitchBean_aka_Christine_E

    These are so really cute! I really love them. I have the mold,and you are right it is a little small compared to other molds. I am really loving watching your early videos. ❤

  • @TrackerLorna
    @TrackerLorna Před 2 lety

    Luv them all 🥰🥰beautiful💞

  • @copperbendcreations
    @copperbendcreations Před rokem

    These are so cute I love them 🐑😀

  • @karenmoffett9770
    @karenmoffett9770 Před rokem

    these are so cute

  • @resinhomecraft2159
    @resinhomecraft2159 Před 2 lety

    Love it so cute

  • @katherineselby2435
    @katherineselby2435 Před 2 lety

    They were all super cute. Thanks for sharing them

  • @JiggsysShed
    @JiggsysShed Před 2 lety

    Love the sheep. Great work Claire.

  • @TaterBug7
    @TaterBug7 Před 2 lety

    Very ZESTY!!! 😁😁😁😁😁😁

  • @calissaobviouslycannotdeci7419

    The sheep are cute! I love these! Beautiful sets.... XOXO

  • @susanmurray7530
    @susanmurray7530 Před 2 lety

    I love these. 😍

  • @trevorburgess2695
    @trevorburgess2695 Před 2 lety

    Wonderful Claire,they are all lovely. 😎💙👏

  • @melissaphillis7247
    @melissaphillis7247 Před 2 lety

    Gorgeous sets! Sheep are adorable! You're so clever.

  • @Vsv1224
    @Vsv1224 Před 9 měsíci

    You are sooo fun to listen to. I always enjoy your videos! Your sheep are wonderful. I can almost hear them. 😁 I like the Leon’s, too. They do look like lemons. The colors you used are perfect. What is a sweat line, though?

  • @literallyawesome9911
    @literallyawesome9911 Před 2 lety

    We do love them

  • @janeresincraftsimm9388

    Love the sheep coasters

  • @kerrysmith973
    @kerrysmith973 Před 2 lety +4

    Love them all!!!! I was looking for a mold that I could use to create a storage caddy for my cricut accessories but yet to find one! I really want to do a jesmonite one like your bright coloured crazy ones!! I will continue with the search!!!!! 🤞🤞

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +1

      Ohhh thankyou Kerry ... that would be lovely to have a caddy sized mould ... I have used the diamond cut pot moulds and the giant pot moulds ... nothing in between 😢

  • @susanwalters8891
    @susanwalters8891 Před 2 lety

    Love them!!! Sheep are my favourite. I so enjoy watching your videos ☺️☺️xx

  • @ashlee2379
    @ashlee2379 Před 2 lety

    Love the lemons 😍😍🍋🍋

  • @ArtonBirch
    @ArtonBirch Před 2 lety

    Super cute with the sheep and lemons heheheh 🥰🤩

  • @trevorburgess2695
    @trevorburgess2695 Před 2 lety

    Love the oranges and lemons.

  • @steveellis8746
    @steveellis8746 Před 2 lety

    Nice job Claire x

  • @ellishansen8115
    @ellishansen8115 Před 2 lety +1

    Oh and yes, you can totally make longer videos. If folks don't like them they can fast forward. I think besides being talented, you're also entertaining.

  • @jacquelinehelliwell5954

    Hiya Claire, these are super cute coasters love the sheep tfs Jax 🥰x

  • @jeannehinrichs5734
    @jeannehinrichs5734 Před 2 lety

    so cute

  • @LiveItLikeLisa
    @LiveItLikeLisa Před 2 lety

    Oh I’m doing a bit of catch up!! Omg freakin gawd these are so adorable!!! You make it look effortless, I swear mine would look like the shit emoji sitting in the middle!!! Hahaha! Omg now there’s another idea!! Hahaha. Love how they turned out just gorgeous!

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      thank you so much lovely xxx but haaaaaaaaaaa lmao that is toooo funny !!! I am literally watching your latest as we speak

  • @valentinakostova8033
    @valentinakostova8033 Před 2 lety

    i just got this mold from amazon today and i am going to try it with jesmonite ! we are twin flames u know :D

  • @cansarahdiyit
    @cansarahdiyit Před 2 lety

    Omg I see the sheep as promised!!!!!!!!!!!

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      Yayyy 😍😍 they came out utterly adorable

    • @cansarahdiyit
      @cansarahdiyit Před 2 lety

      @@ClairesCraftyCorner is there a way for me to purchase those?

    • @jacquelinevandermeer
      @jacquelinevandermeer Před 2 lety

      Oh the little tail🥰🥰 so adorable again Claire!! ♥️

    • @lesleywilliams5877
      @lesleywilliams5877 Před 2 lety

      I love how you are fearless and just go for it! I love both your designs. I have this mould so will have a go tomorrow. Exciting! Do you have a shop where you sell your makes?

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +1

      @@jacquelinevandermeer thankyooooo .. so glad you enjoyed it ❤❤❤

  • @markthompson6860
    @markthompson6860 Před 2 lety

    thank you
    xxxxxxxxxxxxxx

  • @gourdhead22
    @gourdhead22 Před 2 lety

    Love them so much. The little sheep are cuteness overload. Does jesmonite scratch you molds. ? Have you noticed losing the shine. ? Can you do both resin and then make another creation out of jesmonite or do you have jesmonite molds and resin designated molds?? Claire I love your creations and you are easy to follow. You give us great inspiration. Thank you hugs Sheryl 💙🎨💙

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      Heyyyy my lovely ... so glad you love them ... the moulds can be used for both with absolutely no impact on the shine of the mould xxx

  • @lindaeastment4542
    @lindaeastment4542 Před 2 lety

    HI Claire, Super sweet loved them I thought you done a fab job Claire, please can you tell me if you Dropped one would it Break ??? Lin ❤️👍

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      thank you so much xx heyyy lovely ... no they wont break xx depending ... I have dropped a huge pot and it bounched and dented my wooden floor .. I also dropped a coaster earlier from todays filming and it bounced ... However .. If you dropped it on to concrete there is ahigher chance than it breaking on wood flooring x

  • @aneliesewilkinson9808
    @aneliesewilkinson9808 Před 2 lety +1

    Any advice on how to stop the holder bowing. I tried packing it out but had the opposite issue. Looks like yours stayed pretty straight in this one (talking about the opening bit bending inward)

  • @anntralka9749
    @anntralka9749 Před 2 lety +1

    Love this! Can you use the Jesminite to draw pictures like sheep and then resin the entire rest? Thank u!

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      Heyyyyy Ann ... yes absolutely you can x You just need to remember. Jesmonite DOES NOT stick to Resin ... but Resin does stick to jesmonite. So you can back and top coat in Resin ... but not the other way around x

    • @anntralka9749
      @anntralka9749 Před 2 lety +1

      @@ClairesCraftyCorner You are a gem. Thank you. I truly adore your sheep. They are perfect

  • @ps3845
    @ps3845 Před 2 lety +1

    Omg claire these are so sweet I adore the sheep they lemons I like but the green is not for me like the holder but you did fantastic as always honey ? Have you measured that mould yet for me ?

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      Thankyou Paula .. so sorry no i will set an alarm for tomorrow been run off feet with work today. ❤ setting alarm now to do first thing

  • @Jessica-gw9cf
    @Jessica-gw9cf Před 2 lety

    Love it, do you use pure pigment for the sheep/first layer? Or have to mix with jesmonite?

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      hey Jessica .. it always has to be mixed with Jesmonite xx Pigment on its own wont do anything x

  • @mizzuzie3338
    @mizzuzie3338 Před 2 lety

    Those sheep are just too cute and the lemons do look like lemons. A black pupil done on the Cricut for Halloween?

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +1

      ohhh that would work .. they look so Hallooween / eyes/ snake haaaaaaa

  • @traceysmartart
    @traceysmartart Před 3 měsíci

    Hi Claire. I've bought some jesmonite but not tried making anything yet. Will the mixed jesmonite in the plastic bottles stay runny or will it set hard too? Just wondered if you could use for any fill holes afterwards if still soft? Thanks x

  • @Faezehmam
    @Faezehmam Před 7 měsíci

    عالی بود

  • @RiinViern
    @RiinViern Před 2 lety

    So cuteeeee! Does the Jesmonite end up hardening in your piping bottles?

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      Thankyooooo xx It can do yes ... you have to be fast fast ... luckily I still have all my bottles .. but with the plastic ones you can always use a cocktail stick to poke out if it dries. Trick is to pipe and then wash out immediately xxx

  • @sandyramsthaler4924
    @sandyramsthaler4924 Před 2 lety

    They are wonderful Claire!
    I wish I could find jesmonite in Canada. I'm sure it's here somewhere lol just haven't found it yet 😅

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +1

      thankyooo Sandy .. you do have a stockist in Canada and I believe they can put your name on the list for when stock comes in xx It is a company called Fibertek in British Columbia

    • @sandyramsthaler4924
      @sandyramsthaler4924 Před 2 lety +1

      @@ClairesCraftyCorner Thanks Claire!
      I will check it out and see if it's affordable for me ☺😁💜

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +1

      @@sandyramsthaler4924 ❤❤❤

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +1

      @@sandyramsthaler4924 I e mailed them earlier ... they are out of stock and hoping to get some in April.

    • @sandyramsthaler4924
      @sandyramsthaler4924 Před 2 lety

      @@ClairesCraftyCorner thanks, I will put that in my calendar for a reminder 😄

  • @catarinacampos3925
    @catarinacampos3925 Před rokem

    Boa tarde espero que me ajude pois não encontro muita informação sobre a minha questão. Sou de Portugal e fiz as minhas primeiras peças. Mas o que gostava de saber se poderia colocar por exemplo gel de duche ou material cosmético dentro de peças feitas em jesmonite mesmo selando as peças.

  • @RebekkaRN1962
    @RebekkaRN1962 Před 2 lety

    Dropping by to sub from Pohl Barn 👍

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +1

      Heyyyyyy Rebekka thank you so much !! that's is great Doug is amazing xx

    • @RebekkaRN1962
      @RebekkaRN1962 Před 2 lety

      @@ClairesCraftyCorner
      Yep I love 💘 him & all his projects. Can't wait to see what you do. Expecting alot from you if you got his recommendation 👍😁

  • @starrspoter
    @starrspoter Před 2 lety

    did u wash the sponges after and let dry? i have that sealer dont remember it saying to do it once with added water lol

  • @ConnieConnie824
    @ConnieConnie824 Před rokem

    Could you have drawn around the lemons with a yellow marker to make a fake sweat line?

  • @farkastinu
    @farkastinu Před 2 lety +1

    hello! :) I hope you can help me, I haven't found any information about this on the internet. I left jesmonite on my mixer and it hardened on it. Is there any way I can somehow diasolve jesmonite or help it come off of the surfice of the plastic mixer ? Thank you ❤

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      Heyyyyy lovely ... im afraid it would be a hammer and chisel job ... once cured Jesmonite is as tough as rocks. You could leave it in a bucket of water for a while and hope that it can dissolve. It is bio degradable to technically it should dissolve after timem

  • @LadyLoulow1
    @LadyLoulow1 Před 2 lety

    Is the second coat also with the dilluted sealer ?

  • @anoopriyaagupta641
    @anoopriyaagupta641 Před 2 lety +1

    Do we need to wait for the shapes to dry before pouring the rest of the jesmonite or can do rgt away

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      Hey lovely ... I mentioned this in the video ... yes absolutely you should wait.

  • @tinacluff2793
    @tinacluff2793 Před 2 lety +1

    Just wondering can you put paper in Jesmonite? Like lay the picture down, for example a picture of a flower, then pour Jesmonite over it?

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +2

      Heyyyy Tina .. I dont know but its on my list to try as I have some gorgeous papers .. want to try my Botanical too .. with jesmonite see if leaves hold up 😍😍

    • @tinacluff2793
      @tinacluff2793 Před 2 lety

      @@ClairesCraftyCorner can't wait to see how they turn out

  • @rebeccahyatt7789
    @rebeccahyatt7789 Před 2 lety

    The lemon ones remind me of an avocado, not a bad thing either! Sheep are adorable. Would like to see them with black hoofs, eyes and noses! (Just my opinion though) Claire, how solid/ hard does the jesmonite cure? Does it cure as solid as resin?

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      thanks Rebecca .. ohhhh definitely let me know how the faces turn out. It is solid solid ... very very hard to break .. but like resin .. not totally indestructable :)

    • @rebeccahyatt7789
      @rebeccahyatt7789 Před 2 lety

      @@ClairesCraftyCorner Thank you, Claire I enjoy working with sturdy crafts!!! I am so clumsy, just ask my husband!!🤣 I really get into them!!!

  • @aslamtunio86
    @aslamtunio86 Před 10 měsíci

    Nice ideas plz

  • @joannedudhill6072
    @joannedudhill6072 Před 2 lety

    Hi all 👋

  • @texas8322
    @texas8322 Před 2 lety

    How hard does this material get after a full curing?

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +1

      Solid as a rock Thomas ... its classed as NOT shatter proof but you would have to drop it from high up and on to concrete for it to break
      I dropped a large plant pot and it bounced off my floors ... (not on purpose I have to add) lol left a dent in my wooden floor.

    • @texas8322
      @texas8322 Před 2 lety +1

      @@ClairesCraftyCorner I'm thinking I might experiment with this stuff.

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety +1

      @@texas8322 ohhh go for it .. its amazing! It can be turned on the lathe too

    • @texas8322
      @texas8322 Před 2 lety +1

      @@ClairesCraftyCorner you already know where I'm going in my mind for a project. When I do something, I'll let you know.

  • @starrspoter
    @starrspoter Před 2 lety

    is it safe to put hot drinks on them

  • @carlyplummer7623
    @carlyplummer7623 Před 2 lety

    If you leave the items with sweat marks out to dry for a few days instead of 1 day before sealing, quite a lot of them go away completely

    • @ClairesCraftyCorner
      @ClairesCraftyCorner  Před 2 lety

      Ohhhh Carly thank you so much I will give that a try :)

    • @carlyplummer7623
      @carlyplummer7623 Před 2 lety

      @@ClairesCraftyCorner no worries! Some people mention a spot that gets some sun will do it a bit faster but I’ve just left mine for enough days to get how I wanted it.