Great Video Bud! For the rebar rusting in a week, possibly painting it with a rust reforming paint would slow the rusting process down a bit or possibly a clear coat paint. Great Work
Praise the rinse! I was addicted to the Hokey Pokey but I turned myself around. Man I’ve been using cobble oxide, only trouble with concrete is blending it so you don’t have a light spot. You make it look so cheap and easy lol💪💪💪
If you were to do a larger space like a bigger patio, garage floor or a complete driveway, would you recommend a weaker dilution and by how much? That muriatic is scary strong stuff and I have been quite nervous about using it up to this point but, I have some very stubborn stains to tackle… Even aluminum brightener straight up did not work completely. (Visually after drying, red clay and rust)
Hey Mike, quick question for you on doors. Do you avoid all light colored doors verse dark ? Whats your process doors ? Other question is about door knobs. I adamant on property protection and taping off electric locks etc. Do you tape off certain types of door handles etc ?
I avoid wooded (stained) doors and ceilings. I usually wash painted doors with water only. If I use SH, I wet the door down first. Electric locks should be taped off, and no SH if possible. Otherwise, I only tape over key holes.
@TheFreshRinse ok gotcha. Yeah I plastic off wood doors but sometimes run into minor issues with painted doors even though my test spot is fine. Trying to find that solid rhythm to fall into rather than 2nd to wash it or avoid it lol
Hey Mike, would you recommend going through Pressuretek or Southside for a pressure washer? I like pressuretek, and I have no issue with them at all. They seam like a great company, but for a pressure washer and for that amount of money I want to make sure I'm going to the right place.
I am considering setting up a pressure washing trailer and would greatly appreciate any guidance or assistance you can provide. Your expertise online would be invaluable in helping me navigate the process. Thank you in advance for your time
😂 I’m going to start using my foot brush too!!
Good vid Mike.
The foot brush is free. And the best part is, you’ll probably never accidentally leave it at the job site. LOL
momma, what’s that guy doing out there spinning in circles hollering about Jesus doing? lol , love it brother!!! keep up the good work! AMEN!
Thank you good man!
Great Video Bud! For the rebar rusting in a week, possibly painting it with a rust reforming paint would slow the rusting process down a bit or possibly a clear coat paint. Great Work
I live that idea. Thank you
Praise the rinse! I was addicted to the Hokey Pokey but I turned myself around. Man I’ve been using cobble oxide, only trouble with concrete is blending it so you don’t have a light spot. You make it look so cheap and easy lol💪💪💪
Thank you my brother
Best rust remover, period!
Agreed
Great video Mike!
Thank you brother
If you were to do a larger space like a bigger patio, garage floor or a complete driveway, would you recommend a weaker dilution and by how much?
That muriatic is scary strong stuff and I have been quite nervous about using it up to this point but, I have some very stubborn stains to tackle… Even aluminum brightener straight up did not work completely. (Visually after drying, red clay and rust)
I would start with 50/50, then work my way stronger
Love the foot brush. I do that with the dog poop. Break it down back in the soil 😬
Well….
Awsome! Is the muriatic acid pure or is it the 30% pool stuff then cut in half? Thanks!
I’m guessing it’s pure. The strong stuff
Hey Mike, quick question for you on doors. Do you avoid all light colored doors verse dark ? Whats your process doors ? Other question is about door knobs. I adamant on property protection and taping off electric locks etc. Do you tape off certain types of door handles etc ?
I avoid wooded (stained) doors and ceilings. I usually wash painted doors with water only. If I use SH, I wet the door down first. Electric locks should be taped off, and no SH if possible. Otherwise, I only tape over key holes.
@TheFreshRinse ok gotcha. Yeah I plastic off wood doors but sometimes run into minor issues with painted doors even though my test spot is fine. Trying to find that solid rhythm to fall into rather than 2nd to wash it or avoid it lol
Hey Mike, would you recommend going through Pressuretek or Southside for a pressure washer? I like pressuretek, and I have no issue with them at all. They seam like a great company, but for a pressure washer and for that amount of money I want to make sure I'm going to the right place.
You’re gonna get the same washer, more than likely. Get one that meets your budget
@@TheFreshRinse Ok, sounds good.
Fresh, won't there be foot marks now with that foot brush?
Naa. I rinsed super quick
Can it be used on vinyl siding
Absolutely!!!
Trapped pressure or flow sensitive unloader?
Trapped
@@TheFreshRinse it seems so smooth. Mines violent to start 😂
I am considering setting up a pressure washing trailer and would greatly appreciate any guidance or assistance you can provide. Your expertise online would be invaluable in helping me navigate the process.
Thank you in advance for your time
Good luck my friend. My channel is mostly devoted to pressure washing. Watch on!
I have to ask. Who do you think scared me? Did I mention being scared in my video? I’ll have to go back and watch. Again, thanks for the comment.
I didn't mean that
I just need someone to help me
I want to build a pressure washing trailer setup through someone with experience
If you’d of said the Hokey Pokey while spinning would’ve worked better. Sure don’t want that concrete guy doing my work
I should try that!
I was about to stop watching... then you told me not to... post another video today.
Told you so!