Customer States Installed Front End Parts, Needs An Alignment | Just Rolled In
Vložit
- čas přidán 15. 04. 2024
- Welcome to Just Rolled In!
For today's episode, we have some customer states photos and videos from all around the web and sent in by subscribers! If you have any questions about any of the photos or videos, feel free to ask in the comments. Also, check out the bottom of this description for more information about each photo & clip.
Hope you enjoyed the video and please consider subscribing. Thanks for watching!
If you want to submit your customer states photos/videos or car pictures, you can do so via our website.
www.justrolledinyt.com/
👉(Not all content sent in will be used and it MUST be yours)👈
Just Rolled In Merch (all profit from merch sales donated to local foodbank)
www.justrolledin.shop/
👉Follow Just Rolled In on Social Media👈
Facebook - / justrolledin
Instagram - / justrolledinyt
TikTok - / justrolledin
Here's the last video, just in case you haven't seen it yet:
• Customer States Instal...
Subscribed to 2nd channel - / justrolledout
Credits:
1st clip - / schoolboyq941
2nd clip - / muskie77
3rd clip - / johnphillips02
"underglow" - / jerichorodriguez3
"battery stolen" - / calebalston02
DEF in the fuel tank of F-150 - / tylermooneyham
rodent damage - / tristanmckinnon3
Each photo & video described.
These videos are meant to be educational but also funny, so if you have any questions don't hesitate to ask!
0:00 Intro
0:05 Toyota Tacoma. The vehicle was towed in. The customer did a bunch of front-end work, leveling kit, ball joints, tie rods, etc. The technician said the camber bolts were damaged by the customer and they tried their best to adjust the alignment. The customer said they will come back with new camber bolts to get it aligned properly, but the technician has been seeing the truck still being driven.
0:22 As you can see the mechanic is pointing at the wheel studs that are sticking past the wheel spacers. So when the customer mounted their wheels, the hub isn't seated properly with the backside of the wheel, which could eventually cause the wheel to fall off. He also mentioned that when he removed the wheel on the passenger side, 3 studs broke since the lug nuts were on so tight.
0:39 Whoever installed the brakes (the technician thinks it was actually the customer), put rtv silicone on the brake hardware and brake pads. You should lubricate/grease the caliper bolts and hardware but not use rtv silicone as that will cause the brake pads to just stay in the same spot/drag which most likely caused the squeak.
0:56 Customer's "custom" underglow.
1:04 The customer drove this Honda Civic 15 minutes to the shop. The customer most likely twisted the brake lines when he was trying to remove the brake hoses as they were most likely seized/stuck.
1:22 As mentioned, the customer thought the battery and cables were stolen as the vehicle didn't start. But the customer didn't know where the battery was located and it just needed a new battery.
1:34 The technician said: "BMW x5 customer hear a bang and then drove over something big. Now it won't shift in park. He ran over his front driveshaft denting his trans pan so bad it won't shift and squished the fuel line. (Not leaking). It was safetied 4 months ago he bought a vehicle off a "buddy"".
1:50 2018 Toyota Highlander. No extra info on why the battery had a crack.
The customer was also driving this around with a leaking transmission for two days before they brought it in, so might have some transmission damage.
2:08 No extra info from the technician but it looks like quite the mess of wires.
2:20 What DEF (diesel exhaust fluid is - bit.ly/3focSjL)
The technician was shocked as a gasoline engine F-150 doesn't require diesel exhaust fluid at all, and the customer managed to put it in the fuel tank. The technician said they declined further diagnosis/repair.
2.7L Ecoboost Ford F-150.
2:36 Those screws are in the wrong holes and are actually just installed on the assembly line when the vehicle is new to keep the brake rotors in place. You can discard those and don't need to re-install them. However, it's just like the 2nd clip with the wheel spacers.
2:52 No extra info from the technician.
3:06 This clip was sent in from a viewer of his original 1945 GMC DUKW.
More info here - bit.ly/2BkY91E
3:17 Outro. Thanks for watching! - Auta a dopravní prostředky
Happy Friday-eve!
You can submit your photos/clips @ www.justrolledinyt.com
Hello
@@dotcinematics we are trying to reach you about your cars extended warenty
hey 😊
bro can you make the vids longer then 30 seconds🤣😂
@@danhard8440 sure I'll make them 3 minutes 😜
Rewiring headlights with household switches is hilarious
Agreed lol
And all that 18-22 gauge wire!
If he got them working the wire would burn right up!
I'm siting here tryin to think why, but then I'm not sure I'd want to even ask them the question.
@@MattExzy Probably couldn't afford to replace the multifunction switch, or couldn't figure out how it worked
I might just use those switches for auxiliary lights if they go in, just for fun
Next time I see my dad, I'm gonna hug him extra hard. For teaching the proper way to work on vehicles and most importantly, when to take it to a professional when it's above my capabilities.
I did that dad thank you thing a few months ago, and it was WAY overdue
"A man's got to know his limitations." Clint Eastwood as Inspector Harry Callahan
@@flyboy2610 "Life is tough, but it's tougher if you're stupid" John Wayne. Not calling anyone in the comments stupid. Just another great quote.
Give him a hug for me and all the other drivers around you. He taught you well.
"extra hard" 😏
Just amazed at what people try to do to their cars without any mechanical knowledge at all...
I'm sorry, is this America? /s LOL. People do dumb stuff. I had someone tell me they thought that tires and brakes were supposed to be covered by insurance lol.
well all mechanics at some point in their lives didn't have mechanical knowledge at all. It's all part of the learning process. I've surely made my share of dumb mistakes before. Granted, not that bad, but I've made them. lol
@@nukfauxsho I think they meant warranty. If they were serious about insurance. Definitely not the brakes lol
@@oscarfunez3806 No they definitely meant insurance. They namedropped Geico and kept saying their insurance would cover their 90k tires and over 100k brakes.
@@nukfauxsho 🤣😅
Fun fact about the "DUCK" (the GMC at the end), the original top speed on water was only 5 mph and left the Marines in them very vulnerable in combat situations, so in the mid 50s the original 4.4L inline 6 (90 horse) engine was replaced with...get this...and 860 horsepower Lycoming T53 jet turbine...
Was an experiment though that didn't pan out, but the extra 770 horsepower did give it a slightly higher top speed.
I would love to experience one of those with 860 HP, and would love to see Cleetus McFarland get his hands on one lmao
This is an example of the boat's hull speed. It doesn't matter how much more hp you create, the speed increase is insignificant. A boat's hull determines its top speed, not the engine.
@@e-curb so if I put a 5hp Evinrude on my 4metre aluminium boat, it will go as fast as the 25hp thats on there now....
Wow physics and fluid dynamics is amazing shit.
@@e-curb I didn't mention for the sake of the comment length (and assuming most readers don't understand "boat stuff") but the Lycoming Duck also had hydrofoils fitted to it for the top speed increase as well. Pretty funky looking thing, if those wanting to look it up.
@@onedayiwillmakesomecontent I believe what they were trying to say is the top speed will be limited by the hull design and type; just as there will be a minimum amount of power required for the hull to effectively move through the water, there is a maximum amount of power where further increases will no longer efficiently increase the speed of the vessel.
So your 4 metre boat will have a minimum and maximum amount of hp range to effectively operate. 5hp likely is insufficient to effectively power your vessel and 125hp likely will exceed the capabilities of your vessel.
I hope that makes sense. Look to the manufacturer specifications to see what power range your vessel requires and is designed to operate within.
I love how the trainee used silicone caulk instead of silicone grease on that brake hardware. Probably heard "silicone" and went for the closest tube marked "silicone".
That was my thought as well.
"Boss, what do I use for grease on these pads?"
"Use the tube of silicone in that there cupboard, Jimmy"
*rifles through various tubes and tubs*
"This silicone grease sure is thick and gloopy... meh, it'll be fine!"
@@jonathanparle8429 The 2002 CRV my mom had ATE brake pads. We did a set about every 10k on the front and 15k rear. I am very experienced at disc brakes.
You can use a very thin smudge of silicone caulk between the back of the pad and the backing plate to stop vibrations/noise. More isn't better though.
Bit of a silly c*** himself 🤣
Yep caulk and crease are two different things
whenever I hear something won't work then followed by "the customer tried to fix it themselves", I know they just made whatever issue twice as bad
At that point, you just ask the customer for their wallet and tell them they'll get it back when it's fixed.
DIY stuff in cars isn't that hard, you just have to be logical about it instead of an idiot. installing aftermarket speakers in a car should be dead simple, i've done it, but the drivers on this channel would mess even that up i'm sure.
not everyone who works on cars. I bought a 1996 4Runner, since ownership all the things it got done for maintenance: new injectors, valve cover gasket, plugs, coils, timing belt/WP, new front main seal, radiator, condenser, dryer, Ac compressor, expansion valve, heater valve, new batt, brake fluid replaced, coolant back to original pink, all front suspension, all bearings front and rear, new rear seals, new seals for transfer case, new oil for t case, new oil for tranny, new oil for fcking everything, tie rods, upgraded brake..now from an 06 tundra, spindle is from tacoma converted to manual hub, this shit goes forever, the truck is basically almost all brand new. JDM Engine swap 80k miles now. Lol. Only time i ever took this to a shop was to load in a freon after a new AC system. bye.
"Someone stole the battery and leads"........omg you spoil us! 🤣🤣
I'd like to know the age of the person who brought it in. I can see some older person who hasn't run into a battery placed in a less common location being confused about that.
@@JCWren steady fella! 🤣🤣🤣 we come from a generation where on the side of the road repairs were the norm. My mother must have towed me home half a dozen times because of the pile of craps that were about years ago. I'm guessing that they're more your age as there's not the awful crap that we used to drive...... you're truly blessed! 😁👍
@@FozzyZ28 My mom was born in 1940 (and passed a couple years ago). She knew a wee bit about cars, like basically that the battery was under the hood. But I can assure you that if you took the car in the video and asked her to find the battery, she'd tell you it wasn't there.
@@JCWren sorry for your loss my friend, truly!! But my old dear (1946) could definitely spot that battery, I'm blessed that she's fitter than I am and I'm still being told off @54.......lol
They got a fleet of at least a dozen or so of "Duck Boats" for the tourist sightseeing trade in Boston. The driver / curator will drive past the Paul Revere house while having all the people on board quacking like ducks at the pedestrians then plunge into the Charles River for a cruise past M.I.T. so the world's' smartest people can quack back at them. 77 years old and still a daily amphibious quacking driver, Sufferin' Succotash!
My E90 has a recall for the driveshaft. Seeing that X5 for sure enabled me to go to the dealer asap
Crap I have an '11 E92 but I don't remember getting a recall letter, I better look mine up
@@brandonlink6568 in the netherlands we can lookup our plates and get all the info about the car for free. It tells you what recalls there where, and which ones has been done before. In your case, it would'nt hurt to go to a BMW dealer and ask if there is a recall pending.
Some time ago there was a recall for x5 front drive shafts, it was for the 2012 and 2013 models, but I dunno if it was only in my country or worldwide...
@@francoisdvanderwesthuizen6772 idk about x5, I just know that the E90 chassis now has one too due to screws backing out
@@Insane98 it's funny how these kinds of recalls only surface now since the E90's is almost 20 years old, the x5 recall mentioned above surfaced merely months after the launch...
0:56 we actually have one of those lights stuck to the inside of the driver's door area of one of the asphalt Modified short track cars I pit crew for. Works great for buckling safety harnesses or doing anything cockpit-related once the sun goes down.
I have a number of those (once upon a time free) Harbor Freight toggle switch lights throughout my motorhome to illuminate places the manufacturer didn't feel were important. As for using them on the outside of a vehicle, well, that's just special.😀
I also use a similar one (but push button) on the underside of the roof panel of a rally car-- the original interior is stripped out, this is the lightest option to get a map/courtesy light!
Soon as I saw it in the wheel well, it looked perfect for when you're doing brake or suspension work. Beats holding a flashlight ;)
have a few in the house if the power ever go's out last time it was out over 24 hours
@@tsherwoodrzero until it's coated with dirt from the tyre.
Remember these fools are on the road with the rest of us.
and they get to vote too!! scary stuff.
Not in my country, we have mandatory checks and no land connection to the US 😁 (but don’t think we don’t have enough idiots with absolutely bonkers ideas here, too. They just do other crazy stuff….)
Im glad to live in Germany, 85% of the shown cars wouldnt be moved a single meter.
Some people I have seen hit something and had it towed in or didn’t know something was broken so it’s not their fault. But others…
I'm those folks. Good luck everybody!
These clips always make me worry when I am driving near other folks. Who knows how many folks are driving this kind of thing around.
the level of stupidity always gets me on this channel
I once had a car I was tinkering with, and one of the wheels was bent. You could drive the car, but the wheel would wobble back and forth. I didn't want to tear up the bearings, so I measured the pattern and drove my truck to get a wheel from a salvage yard...
On the way there I saw someone driving 75+ mph in some kind of old pontiac that had donut spares on all four wheels. And I didn't want to drive with a wobbly wheel.
About 56% of 'em by my reckoning.
Glad I live in Germany where we have the TÜV
Which is a inspection if the car is still street worthy and is mandatory every 2 years.
@@SuperDeinVadda Most US states have something similar, but some states do not. Guess which states you see these sorts of vehicles in...
Those amphibious vehicles are cool, but I still want a boaterhome!
that's the wisconsin ducks ride in the dells.
@@paulmcgrath2175 they also have those in Branson Missouri . A lot of fun to ride
They look fun but they seem to get into a lot of accidents and sinkings. They aren’t particularly good at being boats or at being vehicles, but they’re a useful combination - at least if you’re the military trying to land a bunch of soldiers and equipment.
Not only a lot of accidents but a lot of deaths from drownings.
I was at a shipyard in France once where they had a huge abandoned vehicle/ship/building???) called "Sirene de La Baie", a mobile restaurant that apparently drove/sailed around in the area back in the '70s. I could stand up straight in one of the wheel wells! Sad they're just letting it rust away in a forgotten corner of a shipyard somewhere: collection-jfm.fr/uploads/product_image/71788/zoom_465.jpg
I thoroughly enjoy these videos. I am no mechanic, and I accept that. Thankfully my favorite mechanic is 1/2 mile from the house.
Shower thoughts: if people use building wiring and switches in their cars as a ‘repair’, I wonder what the ‘repairs’ to their homes look like…
OH . MY . GOD . Now I'm really scared !
Cutting structure to run ducting, renovating a bathroom and forgetting to put a drain on the shower, etc lol
Maybe they use car wiring for their buildings.
@@tessahiebert8766 This is exactly why my stepdad paid a plumber buddy of his a $100 and three cases of beer when they renovated the bathroom to be 'elderly friendly' ((He wasn't that old then but he is now and wanted to get it done while they still had time to not worry about it yet))
Had his friend come and go with him to do all the things since he'd sometimes go "hey pal, you know you're forgetting this/mismeasuring that/the other thing here isn't what you need, they're scaming you on it"
When we were looking for a home to buy, we passed over a couple of "DIY specials" as my agent sarcastically called them. Never, ever buy a house like that. It's a fire hazard.
My wife's car had mice eat the wires. Took the best part of a weekend. Match the colors and use the same gauge wires. And now everything works again.
Two feet of 10 wire speed control cable was eaten by a bunny. I can't find where two wires go, since the plug only has eight.
See, you know what you're doing. Good job!-
@@elultimo102 Probably those wires were spliced into other wires before the plug, so highly recommend acquiring a circuit-diagram of the wiring-loom (I bought a DVD of the workshop-manual for my vehicle off eBay)!
They make special tape to repel rodents
@@stevie-ray2020 Depending on the make etc, you can find the repair manual on pirate sites.
Even VW's parts catalogue is available online.
I like how he doesn’t roast or laugh at anybody, he lets the videos do the talking for themselves lol
I just shake my head in amazement. The front end on the Tundra or Tacoma and the brake job were the hilites
Love the DUKW! Amazing how people think they can do their repairs, or take to a buddy, to save money, but it always costs them more in the end.
They can do 6 mph in the water, 50 mph on land, and 200 mph off the edge of a cliff.
@@mythreepants They use them for Harbour Tours in cities like Boston, MA and Halifax, NS, Canada.
@@Chuck59ish That was a paraphrased quote from a Wisconsin Ducks tour guide
@@Chuck59ish Salt water also sunk many Amphi-cars. The designer said they were made for use in rivers and lakes, not oceans. I wonder how they keep the DUKWs from rotting from the salt?
@@elultimo102 The military didn't even try. As long as it lasted long enough to meet the demands of the mission, they didn't care.
In June of 2021 I rebuilt the front suspension on my wife's 2006 Chevy Trailblazer. I replaced everything in there except the struts, they were comparatively new and in good shape. It got upper and lower control arms, new ball joints, inner and outer tie rods, sway bar links and bushings, front brake calipers and rotors, CV axles, the whole enchilada! I knew the toe-in was going to be off, and it was, but just by taking careful measurements of the position of the lower control arm bracket I nailed the camber on both sides, and the caster on the drivers side. The passenger side caster was off just a wiggle. Take your time, folks, and take careful measurements of where things are before you start. There's no excuse for a vehicle to wind up like that first clip. I hope he had it towed in and didn't try to drive it to the shop! That is just plain scary! 👹
at less he got it lined up iv seen people here drive them were you have to hold steering wheel like going around curve to go Strate
@@jonathanparle8429 yep
In shop class, in high school, we restored a DUKW military vehicle. Was absolutely awesome. The thing was a filthy rotten mess when it came in. I mean we were high school kids… so it didn’t look perfect when we were done but it ran and moved and had a fresh paint job when we were done. Unfortunately we never got to drive it into water because there are no places around here where we legally could(according to the teacher). He probably just didn’t want to deal with the consequences if we sank it tho. 😂
I like the 'rare' vehicle clips at the end. Please keep doing that. Perhaps add a few more seconds of it. It's a nice touch.
Can we all take a moment to appreciate the light switch box as a concept. I'm always light impaired under a vehicle. What I would like to see is lights throughout the undercarriage of a vehicle. In all four wheel wells, all four sides in the engine bay, a couple under the engine bay-specifically one pointing at the oil pan drain plug. But with professional wiring only. It would be nice to hit a switch and see what you are doing. Just do it right and not a reject amateur job like we see here all the time.
Funny thing is that old Chevy pickups used to have work lights built in under the hood that came on automatically when you popped it open. Now they'll cover the engine in plastic to keep you from even trying to work on it and once you get all that off you'll see they hid half the parts in nooks and crannies you can't even get to without pulling out the whole engine.
@@hornmonk3zit Have you seen under the hood of a brand new car? You're about 3 years too late.
Well, you could get the AAA battery powered lights and screw them into the inner fender...
@@jondahl3173 That's exactly what the customer in that clip did. That's a self-contained battery-powered light.
I put new bolts in a brother inlaw's running boards on a Friday night a while back. The following weekend I needed my 4 cell Maglite and couldn't find it. Then I remembered sticking it between the cab and the frame of his truck to see the bolts. I called him and had him look under the truck and had 2 miracles happen.
1 The Maglite was still there after a week of freeway and gravel road travel.
2 It was still on !! (Earlier I put in a cheap LED conversion bulb in it and it was very efficient)
The sad fact of these stories are that the customers that came in and said look I fixed it all by myself, are actually still happy and proud they did the job themselves. 🤯🤣🤣🤣
When I worked on Semi trucks I heard that MANY times. ( looking at an injector line leak with rubber hose and hose clamp)😂
Sometimes that's OK, IF you know what you're doing!!
@@thomasschwarting5108 Rubber fuel line doesn't hold back 2300psi from an injector pump
That's not true they know they totally screwed it up so they underplay the damage when they bring it to the shop hoping that that will keep the bill down
i do my own work on my $600 truck because i cant afford otherwise, i make sure i do as much research as possible even buying a service manual for my platform and double check everything is right and torqued to correct spec, only had to pay someone else when it came to mounting new tires to rims & alignment after changing tierods (which i adjusted until it was ok to drive, no where near as bad as the first clip with it being multiple degrees inwards)
Seeing that GMC DUKW reminds me of the trip I took in one in Wisconsin Dells,Wisconsin.A quip the driver shared with us was that the mechanics are "quack doctors".
Wouldn't they be DUKTORS?
I will let myself out, thank you.
Bunch of people died in one operating in filthy
@@franklaskus2395 different company using reproduction DUKWs, the Wisconsin fleet are 100% American WW2 era machines, the fleet in Branson where modified busses, the accident was horrible yes, but operator error and negligence with the design of the reproduction DUKWs is what led to the accident, one of them should of never been on the water in those conditions, and the reproductions had fully closed off passenger cabins, meaning the passengers couldn't get out easily, the Wisconsin DUKWs have a canvas cover over the passenger hold but don't have windows, making them way easier to escape from if needed
That 1st truck reminds me of Tow Mater from Disney's cartoon Cars.
You wanna get a reaction that is priceless from the dealers service manager? Proceed in line till one comes out and helps you. He will ask you what you here for. So I tell him I am here for my scheduled oil change in my truck. I also proceed to tell him that I am in a hurry, so I took off the oil pan bolt and filter on the way over here and hand him a different bolt as I am not that dumb to do this. 😜 This is a mastercard moment🤣
I wonder about these people that say "some other shop did it" when the actually did it themselves. Show us the receipts :)
I love that you always include a clip of something cool at the end, and its not all just nightmare fuel.
My body naturally unclenches when I see that last clip and then the video ends, like clockwork lol.
0:56
Honestly it's not a bad idea 😅
Get cheap rock crawler lights without needing to drill holes and wiring them in your vehicle
Just need to get strong adhesive for them
although I feel like it’s a dead battery waiting to happen
@@09corvettezr1
That why you put Duracell batteries in them 🤣
@@RexWort Whilst I feel like I should've thought of that, that wouldn't work in a Manitoba winter is my official excuse for why I didn't. 😄
That light switch in the wheel well had me rolling. 😂😂
I told myself the wiring for the headlight repair surprisingly good, you know, routed away from moving parts and hot things...and then I saw the light switches.
I want one of those amphibious vehicles.
I want one also. Great tool to use to run over politicians., and hear that bone crunching sound that makes you feel warm inside.
The Wisconsin Dells ducks, Tommy Bartlet water ski shows mid 70s
Any vehicle is an amphibious vehicle if you're brave enough.
Duck Buses in London have a few of them that do tours on the Thames.
@@jayjaynella4539 if you really want to run someone over you don’t need to use an antique military amphibious vehicle, anything big and heavy will do
The duck undid all the evil shown previously, what a sweet unit!
I love the Rotor secured Philips head screws in the wrong holes. The tapered holes are right next to the threaded NON tapered ones.
Everytime I watch one of these videos I feel so much smarter.
For anyone wondering you can use a tape measure to roughly align after replacing some front end parts and you can then just drive it to get it aligned.
People ask me why I don’t do work on my own car, I used to explain. Now I just send them to this channel, enough said
What's really annoying, is I never found a Chilton or Haynes manual for my car.
@@elultimo102 I’m still trying to figure out how to change the blinker fluid
It’s really not that difficult if you have a average IQ. If you actually want to fix it yourself you can definitely do simple stuff like brakes, filters, oil, coolant, etc. these people in the video I believe are stupid and go In clueless and guess how it goes. Not the brightest people in the world I guess
@@NotDuncan I don't know how either, but I have seen Blinker Fluid on the store shelf.😆😆😆
Most people can do the basics, like top up Engine Oil, Radiator Fluid, Windshield Washer Fluid. Power Steering fluid. Change the Cabin filter, Engine Air Filter. That is not hard at all, but people are so idiotic they would put Radiator Fluid where the engine oil goes. Power Steering fluid where the windshield washer fluid is located. Ride the brake pads down to the rotors. Drive the car until the engine locks up, people don't change the oil at the correct mileage. People wonder why a vehicle doesn't last a long time.
0:06 - Good Golly, Miss Molly!
3:17 - I was considering sending in a photo of my XJ, but my li'l guy doesn't look as nice as this one. 😍 Whoever submitted that photo, thank you, I sure hope you are proud!
I get the best laugh out of some of these shots. Keep up the good work.
Thanks, Kent 👍
Those military ducks are awesome.
These videos speak volumes in support of semi-annual vehicle inspections especially in rust belt states. Also why you can't trust the other guy to be able to stop. One of the best channels on CZcams! Like crack for mechanics...
0:07 This clip is wild! I remember when my car needed an alignment and a new hub after I hydroplaned into a curb. I wanted so badly to be able to do it at school (when I was getting my mechanic training) but I thankfully brought into a shop so a professional could fix it before I caused any more damage
I just sold my 1945 DUKW-353 this year. We used to hit the boat ramp a lot faster and made a huge splash... The one in the clip appears to be nicely restored, but the rear winch is missing - and I hope that both bilge pumps work.
Ah the DUCK... quack quack.
@@richarddavidramirez5947 Oh, RICHARD!
Outstanding re-wiring of those headlights 🤣🤣🤣
I lived in Wisconsin and the last one we called a Duck boat. The tours are awesome! Just beautiful areas they take you to. Don't know if they still run them, that was 30 years ago.
They ran tours around the Seattle area with them, until a few years ago, when one caused a terrible accident on a bridge, killed 5 people and injured 60+. It was a maintenance issue, and they got sued into oblivion. So seeing a DUKW on the roads around here would be cause for great alarm.
@@deadrose23 Most tour ducks like the one in Seattle are not original DUKWs. They are a shop built on a newer frame and are larger to accommodate more people. It’s like the difference between a Ferrari and bad kit car. They give the original ones a bad name
@@mtmspanky101 Checking the news reports again, it was an original DUKW that caused the accident. They ran both original and modern remakes. A report had been sent to all operators 2 years before the crash, advising them of a repair that needed to be made to protect the axles where they'd found fractures. They ignored the report, and the axle broke catastrophically, on a narrow bridge with no median to prevent it from entering oncoming traffic. All this is in Seattle Times articles from the aftermath.
@@deadrose23 A less known artical is on a company called RTDI that made that stretched duck. It is much larger then the one in the video. I assumed it was a new frame but maybe it is a old one that is stretched so they can register it as a old vehicle. They replace the engine, transmission, electrical, and manufacture a new body so it is larger and can hold more people. They also replace the axles, steering, and brakes. I looked at one for sale once. Couldn't find an original part on it. RTdi had to pay a settlement also. The accident is extremely tragic and never should have happened.
Well alrighty then... and I was a kid, that's why we called them duck boats. Actually didn't know they were spelled DUKW...
Got stuck on a bypass for over an hour earlier as, just ahead, a car was on its roof blocking both lanes. I missed the rollover by only a minute or so as I was near the front of the queue. Thankfully nobody seemed hurt - fire brigade showed first, then paramedics then the rozzers. No ambulance (other than the paramedic’s vehicle), which makes me think everyone was ok. Eventually the fire brigade yanked the car out the way and we could get past.
No idea how it rolled unless they were driving like their arse was on fire or swerved to avoid something and overcooked it. Windows broken, side airbags deployed and at least one door no longer attached to the rest of the car, plus the roof was a touch mangled…
I half expect it to show up on Just Rolled In next week!
I love seeing house switches and electrical items on cars haha brilliant
Waiting for the day we see a chandelier wired in a vehicle. Lol
@@JustRolledIn Thanks for the idea!. I'll get right on it...
@@JustRolledIn czcams.com/video/LURzhJhBDAY/video.html
This channel represents the trophies of the mechanically declined.
Running out of trophies lol
Mechanically declined 😂😂😂😂
Amazing how people THINK they can do things. Admission of lack of knowledge is the first step in learning. But it makes the world go round.
Y'all found some gems this time around.
People clearly having a ton of fun plunging into the water joyriding a WWII amphibious transport was exactly what I needed this morning.
Good lord, I do the same thing, put all the front end parts on myself and then take it to a shop for alignment. But at least eyeball it into some semblance of straight and parallel before you take it on the road. Hell even a tape measure can get you in the ballpark.
I'll give the guy a half point for going "Okay, did my work. I should probably get this aligned so I'm not all over the place'
Man, am I ever glad I'm not a mechanical idiot! Been fixing, modding and building my own vehicles since I was 13. That 55 years. I just did all the brakes and lines on my '91 F250, and retimed the mechanical injection pump, all is good. I learned this morning that Trans shops will no longer be rebuilding the old ZF 5 manual trans. Apparently parts are too hard to get now. I would love to own one of those DUKWs!
Wiring an overhead light into the fender well was really a stroke of genius. They obviously had trouble seeing while they repaired the wheel in the dark so I love that for them 🙄
Those lights are battery powered and are applied with Velcro. While I don't understand why they would do it. That's not the worst idea I have ever seen.
@@richardmorales5145 somehow that’s even funnier. I guess if you were only able to work on your car at night then those ‘stick up’ lights are a stroke of genius 🤓
@@richardmorales5145 Theyre called 'rock lights' but arent [usually] actually used for rock crawling; theyre used for mall crawlers with big wheels and thin tires.
@@tehagent1321 That's def a Litezall or knockoff brand light. I've tried linking it to Amazon, but the comment keeps disappearing. You can see the logos.
I have them in my guest bedroom closet.
That last vehicle is just stunning 🤣
That light switch would be great for having to change your tire roadside.
That's what I was thinking. Beats my flashlight or phone's light any day.
Stuff $1.49 Wal-Mart disposable camping headlamps in every corner of your car.
_Way_ easier than finding somewhere to stick a light switch when you're moving around to get the spare, set the jack and swap the tire
Love the headlight wire and switch job😵💫😂
as SOON as the SUV rolled onto the ramps 🤣🤣🤣🤣🤣🤣🤣🤣🤣
The last clip is what America is about!!
Cars with no real-life use?
I had some sense of how to handle the alignment bolts and tie rod ends, so the front end work I did to my GMC Sierra wasn't that bed, but boy did I still get laughed at when I brought it in for the alignment!
Went through that when I had to change front coil springs due to eng/trans swap. good news- I wasn't charged more than a standard alignment.
The guys I took my s10 to when I rebuilt the suspension said it was almost right; about as good as could be expected for measuring and eyeballing. They actually gave me some respect for doing the job in my driveway and only having to have them fine tune it.
i love these compilations, because the diy ingenuity of some of these people is hilarious as well as terrifying.
edit: i understand that sometimes you have to just improvise and cut some corners, but think a little about what corners you are trying to cut and if its really worth it.
poor guy who put DEF into his gas tank basically completely nuked his engine by hydrolocking, since DEF is urea dissolved in water
First time I've seen that done in a vehicle with a gas engine. Lots of times with diesels though lol
By by fuel pump/injectors at the least.
I was trying to figure out what why someone would try that on purpose. Then I realized it was probably an accident at a truck stop where you can find DEF at the pumps. They probably thought it was gas.
urea dissolved in water? that's piss
So you’re saying that if I pee in my truck’s fuel tank I’ll get better performance and mileage? 👍🏻 see you next week on JRI 🤣🤣🤣
"Another shop" does that mean they did it in the garage and they dont want to be embarrassed?
I think so😜
I prefer saying "a friend did it" whenever I screw up a fix on my car and need the professionals. 😂
Finally on time! Lol. Love it and these. Thank u my friend!
I am so putting that light switch under my Volvo!! Yessss!! 😂😂😂😂 (Just hit 260k in her too! 😮🥰)
You're quick today lol. Thanks for being here my friend.
@@JustRolledIn anytime. I was actually alert this time lol
I'll be waiting for some photos once you got those light switches installed 😜
@@JustRolledIn right?! Gotta get underneath her first……😖🤬…. Maybe not lol. Too heavy
Well, did a similar thing to get a rear trunk light as my new to me does not come with it. So added in a LED cluster and a switch.
I'm not a mechanic but I've always did my brakes and helped others so they could learn. I feel so good knowing I am 100% better doing repairs then all the people on here. Growing up on the seat of a dirt bike was well worth the skills I learned
I see stuff like that about once a week where I am. Especially that ranger, I do alignments for another local "shop" and almost every time they look like that.
The Dukw was super appreciated as a palate cleanser from the horror that proceeded it.
The first clip reminded me that I once did a tie rod end on my Mercedes 300TD, and the old one was so worn out I couldn't use it to get an approximate length for the new one. I set the alignment using a tape measure and planned to drive it to the shop. But it tracked straight and the tires wore evenly so I never got around to it. I sold it a few years later with that same tape measure toe setting.
Always look forward to these videos. thankyou
That '45 Duke... just rolled in to that lake ;)
The Ducks in Wisconsin Dells have been fun for decades.
Man those headlights. 😂😂😂😂. I spit my coffee out 🤣🤣🤣
Wow that picture of the Ford F100 is exactly like my dad’s. Unfortunately he passed away several years ago but that picture brought back many happy memories. Thanks
I think your videos explain why I got a "Thank you" and a handshake from my mechanic after he worked on my car (clutch job, I don't have the tools at home to do it) and he had went on about how I kept everything to factory specs on my Abarth.
Saw a scion tc driving on the road yesterday. Had a donut spare that was wobbling all over the place. I don’t think he got the lug nuts tight enough.
After doing the front end on my tacoma, I drove to get it aligned lol. It's not hard, count turns on tie rods and keep tires as straight forward messing with the adjustment bolts on lower control arms. 🤯
3:06 I rode in one of these when I was a teen at Wisconsin Dells. I even got to drive it for a little while. It was a lot of fun!
I used to work for a Duck Tour company that only had two boats and one was one of those old WWII DUKW’s!! It was sooooo hot giving the tour in that thing because you’re sitting right on the engine, basically. But still super fun!
This video was a roller-coaster of emotions.
1:30 yeah ngl that would've tripped me up for a min too, seeing an open space where a battery is usually located is trippy
Love those DUK boats! I'm an excellent driver/pilot! Haha.
My brother is an "Other Park Services, Park Ranger Maintenance Mechanic" for the Florida State Park service. Just last week one of the regular rangers put diesel into a gasoline powered pickup and now my brother has to fix it.
I've had this happen when I worked at Manheim's Imperial Auto Auction. I just syphoned out as much as I could. Then filled the tank with Sunoco's 110 octane racing fuel and a bottle of CAM2 octane booster. Had to put some carb cleaner in the throttle body to get it started, but after a few sputters it purred like a kitten.
I like how you state things, great job of pointing out common sense problems.
the lightswitch in the wheelwell was hilarious and useful. minus water corrosion of course
0:59
Another case of if it looks stupid, but it works, it ain't stupid😆
I love the wheel well light - great idea!
Man, your videos always save the day.
I am a machinist, I can handle a lot of jobs but as I get older I have learned that If something is over my head, it is best to call in a professional or at least talk to one.... This goes for all other trades, electrical, plumbing, gas-fitting etc... They have knowledge and experience that I just cannot match and it saves me a lot of money in the long run knowing a job is done right.
Those headlights being wired up with light switches reminded me of something I had to do with one of my old cars.
I had an issue with the car dieing intermittently and mechanics couldn't figure it out due to it not having issues while in the shop. So to go around this we figured that the car was cutting power to the fuel pump when this happened. I found the wire that supplies power to the pump spliced into that and ran power from the battery direct to the pump with control of a light switch. Never died again with that sketchy set up.
1:01 This is now a light duty vehicle.
😂😂
Have a great weekend my friend
Wow - that Duck is something else!!
Hey, gotta hand it to the customer in 0:56. The install looks pretty clean despite it looking ridiculous from underneath, lol.
smh.... And to think, my first car came instructions with what the gap was supposed to be on the spark plugs 🤔.
Now it says don't drink the battery acid 😜
@@JustRolledIn 🤣🤣🤣🤣🤣🤣🤣
@@JustRolledIn Future cars will probably come with instructions to not lick the battery contacts or something like that.
Would not surprise me.
That light in the wheel arch I cant help but think is a good idea, I wouldn't do it myself but still I bet its helpful when you have a flat and it's pitch black and you can't see a thing. imagine the guy smug look of satisfaction as he says darkness not an issue
Loved the Dukw at the end 👍👍
Great subject matter for your channel, with limitless supply! 😂😂
I love these videos, and as always, I just shake my head. :)
Long time watcher. Taking the plunge and subscribing! Keep up this great content!
Thanks for being here!