Excellent as usual, and the suggestion to do it on a trailer, good idea, I don't have any concrete at my farm so thanks for taking the time to share all this info.
Great job. Good explanation, good video shots with proper lighting. Thanks for the info on the JD level gauge. You made it easy to understand & perform. Thank you.
It did thanks agin. My height knob seems to be hard to adjust on a brand new tractor is there something I’m doing wrong ? Does the deck need to be in a certain position or something like that it’s almost impossible to move
I apologize if it sounds like a stupid questionwhen leveling the front of the Kubota do you do the left and the right side of the two branches the two bolts on the front bracket if that makes sense,. not speaking of the back I'm speaking of the front of the Kubota at the end of the video do you adjust both of those nuts?
What mulching kit do you have on your tractor. I'm wanting to add one to mine but don't want cheap junk. All i can find is cheap over priced junk compared to what I've put on the ole cub cadet.
I'd level the deck side to side. The you can measure the front and rear of the same blade for your front and rear. I usually measure the blade and the right side since you can fold up the chute deflector for easy access.
94BULLITT nice, I ordered a mulch kid for my bx mower kit. I've always mulched with my riding mower. But, not sure if it's a wast of $300 on the bx yet.
ok, so you said that if you level it on 4, and then cut at 2, your deck wont be level? Your deck should be level at any height correct? I cant see adjusting the height knob will make the deck unlevel from setting to setting.....Level the deck at 4, it should be level at any height. The knob only adjust how far the deck with drop down? Unless you meant that the anti scalp wheels will hit the ground making it unlevel.......maybe im wrong...
The deck does not raise straight up and down. Watch how it moves when you let it down. It should be leveled at your desired cutting height. It won't be out that much if you change your cutting height but it is best to have it set up where you use the deck the most.
Thank you! No babbling, just straight to the facts!~
The best How to on youtube. Thank You
Excellent as usual, and the suggestion to do it on a trailer, good idea, I don't have any concrete at my farm so thanks for taking the time to share all this info.
Your welcome! Thanks for commenting!
Great job. Good explanation, good video shots with proper lighting. Thanks for the info on the JD level gauge. You made it easy to understand & perform. Thank you.
Your welcome. I'm glad you found it helpful!
thank you!! very basic, which is what I always want to help me understand.
Nice job, no BS, just gitr done.. I like it!!
thanks!!!! a simple clear explaination and how to correct if off!!!
You're welcome!
Best available video out there!
Thank you!
thanks, good video.
Great video. Thank you.
Great video I wasn’t real sure I’m gonna do this tonight
Thanks! I hope it went smoothly!
It did thanks agin. My height knob seems to be hard to adjust on a brand new tractor is there something I’m doing wrong ? Does the deck need to be in a certain position or something like that it’s almost impossible to move
Thanks for the information!
Thanks for watching!
Thanks! Good and clear instructions!!
Your welcome!
Thank you. Very helpful.
You're welcome!
Great info and photography,
Thanks!!!
Thanks, I really appreciate that.
I apologize if it sounds like a stupid questionwhen leveling the front of the Kubota do you do the left and the right side of the two branches the two bolts on the front bracket if that makes sense,. not speaking of the back I'm speaking of the front of the Kubota at the end of the video do you adjust both of those nuts?
Yes, the adjust it at those nuts.
Thank you for the help. Great video
Thanks and Your Welcome!
Very good video, thanks for posting.
Thanks!
Nice job.
+Old Power Thanks!
Not my brand or model but it all applies! Thanks!
Your welcome. Thanks for taking the time to comment.
What mulching kit do you have on your tractor. I'm wanting to add one to mine but don't want cheap junk. All i can find is cheap over priced junk compared to what I've put on the ole cub cadet.
It is a homemade OCDC.
czcams.com/video/amGg7CJYRdo/video.html
Where the best place to measure front to back on a two blade more? Thank you!
I'd level the deck side to side. The you can measure the front and rear of the same blade for your front and rear. I usually measure the blade and the right side since you can fold up the chute deflector for easy access.
What is the metal flap over your mower chute and cable running to it?
It is an OCDC (Operator Controled Discharge Chute). It allows me to control how far my clipping go.
czcams.com/video/amGg7CJYRdo/video.html
94BULLITT nice, I ordered a mulch kid for my bx mower kit. I've always mulched with my riding mower. But, not sure if it's a wast of $300 on the bx yet.
I have a question. Before starting to level, do you lower the deck all the way down, or half way ? Thanks in advance
Lower it to where you cut your grass.
@@TractorTech so, if I want a three inch cut I set my dial at 3 then adjust to that ?
Good info,.......well done! :)
Thank you!!!
What if you dont't have a level place on a floor. My garage is not level
Do you have a trailer you could put it on? You could level it side to side with tire pressure or a floor jack and front to rear with tongue jack.
ok, so you said that if you level it on 4, and then cut at 2, your deck wont be level? Your deck should be level at any height correct? I cant see adjusting the height knob will make the deck unlevel from setting to setting.....Level the deck at 4, it should be level at any height. The knob only adjust how far the deck with drop down?
Unless you meant that the anti scalp wheels will hit the ground making it unlevel.......maybe im wrong...
The deck does not raise straight up and down. Watch how it moves when you let it down. It should be leveled at your desired cutting height. It won't be out that much if you change your cutting height but it is best to have it set up where you use the deck the most.