Anyway we can get a typed out list for the suspension / lift upgrades? What OME springs did you roll with? How did you setup the bilstein 5100s? 4Runner looks great man! Perfect setup IMO
@@AlexPerrucci Duuuude thanks so much! I just printed this out along with a photo of your rig I have it tacked up on my wall next to my PC now. Thanks bro.
@@AlexPerruccihow is the ride quality with your front 5100’s on the second perch? I’m looking to do the same with my 3rd gen, having them on the lowest perch sits far too low with 890s in the back for my liking.
I have a 2002 Limited that’s also black with the rear locking diff I’ve received offers from many different people needless to say it’s staying in the family.
Cool beans. Did you ever do an install video on the Trackmotiv CVs? I have a set and am looking to do the job myself. I know I can find tons of CV videos on YT but was the process any different? Don't see how it would be, but thought I'd ask. Did it take 2 people to get them seated?
Didn't do a video on the CV's. Might have shown it briefly in this video: czcams.com/video/LzIeIzyIyJg/video.html Same process as any other cv though! I was able to do them myself, passenger side went fairly easy, had to keep adjusting position and use some muscle on the drivers side to get it seated.
Very minimal rubbing with my current alignment. 0 offset is ok, I run spacers to get them closer to -25. I just enjoy the more flush look, the further you push them out though the more likely you are to rub.
Anyway we can get a typed out list for the suspension / lift upgrades? What OME springs did you roll with? How did you setup the bilstein 5100s? 4Runner looks great man! Perfect setup IMO
Thanks!
OME 881
OME 890
Bilstein 5100 Shocks front/rear (front spring perch set to 2nd notch from the bottom)
SPC 25460 Upper Control Arms
Whiteline LCA Bushings
333Fab Cam Eliminators
Energy Suspension poly steering rack bushings, panhard bar bushings
Eimkieth PCK
@@AlexPerrucci Duuuude thanks so much! I just printed this out along with a photo of your rig I have it tacked up on my wall next to my PC now. Thanks bro.
@@AlexPerruccihow is the ride quality with your front 5100’s on the second perch?
I’m looking to do the same with my 3rd gen, having them on the lowest perch sits far too low with 890s in the back for my liking.
@@christianmoule-smith2068 Didn't notice a difference in ride moving them up to the second perch. Still plenty comfortable imo.
Loving that Napp Motorsports sweatshirt!! Awesome rig.
Thanks!
Holiday Special 🔥
Yuh!
Super clean bro! just picked up 2001 limited with the same two tone black/tan colorway. Torn between keeping stock look or modifying lol
Thanks! Hard to keep it stock imo haha.
I have a 2002 Limited that’s also black with the rear locking diff I’ve received offers from many different people needless to say it’s staying in the family.
Great trucks!
Awesome runner. Trying to get a 3rd gen after letting go my 03 Tacoma
Thank you! Toyota makes some great trucks!
i have a 2001 sr5 4wd with 98k miles. It looks and drives like new.
That's wild. My 98nhas 364,000 lol
Love to hear it!
Cool beans. Did you ever do an install video on the Trackmotiv CVs? I have a set and am looking to do the job myself. I know I can find tons of CV videos on YT but was the process any different? Don't see how it would be, but thought I'd ask. Did it take 2 people to get them seated?
Didn't do a video on the CV's. Might have shown it briefly in this video: czcams.com/video/LzIeIzyIyJg/video.html
Same process as any other cv though! I was able to do them myself, passenger side went fairly easy, had to keep adjusting position and use some muscle on the drivers side to get it seated.
It’s really good on long road trips? I would think it would be slow and have terrible MPG
Nice vid man! Did you use OEM sway bar end links both 2nd gen and 3rd?
Thanks! Yeah they’re just some from rockauto though.
@@AlexPerrucci thanks for the reply man. Do you mind sharing which ones you bought exactly?
@@AlexPerrucci I’m doing the exact same lift!
@@kevinmillones7360 you’re going to enjoy it! Mines still going strong.
@@AlexPerrucci which ones from rock auto did you get if you don’t mind me asking?
This mf is clean, the two-tone paint is 🔥
Thanks!
Sweet build man! What spring numbers tho? Thanks
Thanks! 881 and 890.
Just curious what rate you chose for the OME springs, and how you like them?
Can’t decide between them for light / medium / heavy
Thanks!
I have the medium. Fronts are 881, rear are 890. No complaints!
Thanks for posting this! What's your lift height? I'm planning to do something very similar to my 2002.
It’s about 2.5”!
To get the 2.5" ride height, did you use the 3rd gen 4runner 5100s or other toyota model 5100s? @@AlexPerrucci
looks great! Which mounting bracket did you use for the Auxbeam switch controller by the ashtray?
My buddy custom made me a bracket to allow it to slide into the ashtray area.
@@AlexPerrucci good idea. I’ll try that.
Have the same runner, what would you paint the tan trim with? I want to murder out mine and am looking for any suggestions thank you
What rims are you running, what offset and where did you buy them
16x8 +0 with 25mm spacer. Bought them from WheelPros.
The truck looks great! Any rubbing with the 285 on 8” wheel. Are you happy with the 0 offset? Thanks
Very minimal rubbing with my current alignment. 0 offset is ok, I run spacers to get them closer to -25. I just enjoy the more flush look, the further you push them out though the more likely you are to rub.
@@AlexPerrucci did you try them without spacers? I’m wondering if they would rub less. I want to run the same size, but without the spacers. Thanks
@@cybrah shouldn’t be a problem without spacers. No rub on the stock wheels with these tires, similar offset to 0.
What’s the mileage on the beauty? Sorry if I missed it in video.
Just went over 300k recently!
Where did you buy your rock sliders?
Custom made them with a friend of mine.
Got a #/info on your rear cargo mat? is that Weather tech too?
It's a Husky brand liner that came with the truck when I bought it. Weathertech does make a rear cargo mat for it though!
Did you need the extended brake lines for your set up?
Nope! I did purchase and extended rear line recently but haven't installed yet. Fronts aren't necessary to be extended for this setup.
Do you get any rubbing in your inner fender wells? Are you also running spacers?
How does it ride on LT tires??
Not bad, they’re a little firmer but plenty comfortable still.
Sweet. Where are the rock sliders from?
Where are those sliders from?
My buddy and I custom made them.
@@AlexPerrucci ahh man they are sick! Wanted to get something like that. Are they bolt on or welded
Thanks! Welded. Could be made to be bolt on though. @@waltertang9303
Good video, Alex, By any chance to invite you to do a review for our product? We have emailed you to inquire about an opportunity